ENGINE TIMING TOOLS

Engine timing tool set - Renault 1.6/1.9 dCi, 50777

Set contents:
- Crankshaft locking pin  - OEM No. MOT 1489
- Camshaft / crankshaft timing pin – OEM No. 0194B, 999-7122, 21-263, MOT 1430, 0187B, 0189B
- TDC Timing Pin -  KM603 – OEM No. MOT 1054 MOT 861 MOT 863 

Applicable: Renault Laguna, Clio и  Kangoo с 1.5 and 1.9 dCi двигатели.
And also for:
Nissan Kubistar, Micra, Note, Qashqai, Dacia Duster, Suzuki  Jimmy  with 1.5 dCi engines.

Renault Clio 1.5 DCi (2001-2008)
Renault Clio 1.9 DTi (1999-2003)
Renault Espace 1.9 TDi (1997-2002)
Renault Kangoo 1.5 DCi (2004-2008)
Renault Kangoo 1.9 DTi (1999-2003)
Renault Laguna 1.9 DTi (1997-2003)
Renault Megane II 1.5 DCi (2002-2005)
Renault Megane 1.9 D/TD/TDi (1995-2003)
Renault Scenic II 1.5 DCi (2002-2005)
Renault Scenic 1.9 TD (1995-1999)
Engine code: K9K; F9Q; F8Q

Made in: China

Engine timing tool set – Ford, Mazda & Volvo, 50658

Designed for the belt or chain driven petrol or diesel Ford, Mazda and Volvo engines.
This Ford and Mazda petrol engine timing tool is a four-piece camshaft setting bar that is suitable for all the applications including the latest HWDA, HWDB, HXDA, Zetec and Duratec engines.
This automotive tool covers a huge range which include 1.25 L, 1.4 L, 1.6 L and 1.6 L 16V Ti-VCT engines as well s the 1.8 L, 2.0 L and 2.3 L 16V engines.
Set is suitable for these engines in Mazda and Volvo vehicles.

OEM Tools: Ford; 303-1054, 303-507 (21-210), 303-620 (21-163), 303-574, 303-748, 303-376 (21-162B), 303-376B, Mazda; 49 JE01 061, 303-574, 49 JE02 061, 303-465, 49 JE01 054, Volvo; 999 7152, 999 7151

Applications:

Ford: C-MAX (07-10), Cougar (98-01), Fiesta (95-15), Focus (98-11), Focus C-MAX (03-07), Fusion (02-12), Galaxy (06-12), Mondeo (93-12), Puma (97-02), S-MAX (06-12), Tourneo Connect (02-06), Transit (06-12), Transit Connect (02-06)

Mazda: 121 ZQ (95-00), 2 DY (02-07), 3 BK (03-09), 3 BL (09-15), 5 CR (05-10), 5 CW (10-12), 6 GG/GY (02-07), 6 GH (07-15), MPV LW (02-05), MX-5 NC (05-15), Tribute EP (04-06)

Volvo: C30 (06-13), S40 (06-12), S80 (07-11), V50 (04-12)

Ensure precise engine timing with this comprehensive Engine Timing Tool Set, designed for Ford, Mazda, and Volvo 1.6L and 2.0L T4/T5 engines (50736). This kit provides the essential tools needed to properly synchronize your engine, offering both reliability and accuracy.

Key Features:

• Broad Compatibility: Suitable for a wide range of Ford, Volvo, and Mazda models.
• High-Quality Materials: Constructed from high-quality carbon steel for superior strength and durability.
• Complete Set: Includes all necessary tools for camshaft timing and locking.

Applications:

Ford: Compatible with Ford Fiesta (08-15), B-Max (12-15), C-Max (03-15), Focus (04-15), Grand C-Max (10-15), Tourneo Connect (13-15), Grand Tourneo Connect (13-15), S-Max (10-15), Galaxy (10-15), Kuga (13-15), and Transit Connect (13-15).

Volvo: Suitable for Volvo S80 (09-14), V40 (09-14), V40 Cross Country (10-14), XC60 (09-14), V60 (10-14), V70 (09-14), and S60 (11-11).

Mazda: Compatible with Mazda 5 (CW) (10-15) and Mazda 6 (GH) (10-13).

Made in China.

Engine Timing tool set for Ford 2.0 Eco Boost SCTi & Ti-VCT engines, 50740

Specially designed to synchronize FORD SCTI ECOBOOST / Ti-VCT 2.0L petrol  engines
Applicable:
Ford Galaxy (2010)
Ford Mondeo (2010)
Ford S MAX (2010)
Ford FOCUS (2011)
Engine codes: TNWA, TNWB, TNBA, TPWA, MGDA and XQDA
OEM: 303-748, 303-1504, 303-1565, 303-1521

Opel/Vauxall и Chevrolet 2.0 SOHC 16V Diesel engine Timing tool kit, 50700

Developed for the late Vauxhall/Chevrolet 2.0 Common Rail diesel engine this kit holds the correct position of the camshafts and crankshaft whilst changing the timing belt on SOHC 16V engines.
Content:

• Crankshaft Locking Pin
• Camshaft Locking Tool

(OEM: EN-48245, EN-48246)

Engine Codes: Z20DM; Z20DMH; LLW/Z20DMH; RA420; Z20S1, Z20S3; Z20S4; Z20S5; A20DTJ ...

Made in China

3 pcs Glow plug removal socket tool set Fiat, Alfa, Lancia, 50680

Special design to reach the glow plugs when the cable restricts their access.
These sockets have a lateral slot to go round the cable attached to the glow plug
Sizes: 8 mm, 9 mm, 10 mm
Length: 50 mm
Material: CR-V
Application: Alfa Romeo 147/156/159 / GT / Spider / Brera / Fiat Bravo / Stilo / GM Astra / Signum / Vectra-C / Zafira / Saab 93/95 as well as some PSA models

Diesel engine setting/locking set - VAG 2.4/2.5D Sdi/Tdi/TDiCR- belt drive, 50660

This engine timing locking tools use for synhronization on Volkswagen 2.4D with engine codes AAB, AJA (02/95-03).

• The correct alignment is achieved by placing equal thickness of shims between both ends of the bracket and the cylinder head Camshaft Setting Strap is used to set the correct timing position of the camshaft.
• The centre Part of the bracket fits into the slotted end of the camshaft and the ends of the bracket located on the cylinder head.
• Injection Pump Pulley Setting Spigot is 15.4mm in diameter and is used on engines with a one piece injection pump sprocket.
• The crankshaft damper holding tool prevents the damper from rotating whilst unfastening and refastening the centre bolt.
• This tool should be used with 3/4" Dr. power bar. VW group 2.5TDi common rail diesel engines (belt) in VOLKSWAGEN LT Crafter BJJ, BJK, BJL and BJM engines.
Included:
Crankshaft Damper Holding Tool
Crankshaft Setting Strap
Injection pump setting spigot
Shims (2)
Tensioner Adjuster
Crankshaft Locking Pin
Applications: VW: Crafter (2006-2013), LT (1996-2006), Transporter (1990-2003)
OEM Tools: T10025/3248/3419, T50009, 2064, 2065A, 3355
2.4D: AAB, AJA
2.5D SDi: AGX
2.5D TDi: ACV, AHD, AHY, AJT, ANJ, APA, AUF, AVR, AXG, AXL, AYC, AYY, BBE, BBF
2.5 TDi CR: BJJ, BJK, BJL, BJM
2.5 BlueTDi CR: CEBA, CEBB, CECA, CECB

Made in China

3 pcs Timing belt double pin wrenches tools set – VW, Audi, 50612

Applications :
Lupo Polo 1.4 TDi PD
Golf, Bora, Polo 1.9 TDi, PD
Beetle, Sharan 1.9 TDi PD
Passat 1.9 TDi PD
AudiA2 /A3 1.4 / 1.9 TDi PD, A4 / A6 1.9 TDi A4 / A6/A8  ALLROAD 2.5 V6TDi

Extra long Oxygen sensor socket 22 mm, 50491

Material: CR-MO
Suitable for: BMW, Ford, Mercedes Benz C and E class (602, 605, 606 engines), Opel, Rover, VAG, Volvo, VW, Audi, Skoda, Seat.

1/2 ", Size: 22 mm, L = 150 mm

Engine timing tool set Ford Focus/Cmax 1.6 Ti-VCT, 50305

Features: Designed to locking  the main components of the 1.6 Ti-VCT engines when changing the camshaft belt on Ford cars.
Applicable to Ford Focus / Cmax 1.6 Ti-VCT petrol engines with engine code HXDA (2003-2007) and Ford Focus / C-MAX / Mondeo / C-MAX / 2.0 TDCi diesel engines with G6DA engine code, G6DB, G6DC 2003-2007.
Contains the following OEM tools:
OEM 303-1097
OEM 303-1054
OEM 303-1059
OEM 303-748
OEM 303-735

Made in China

Valve spring compressor master set, 50103

Applicable to: OHV & OHC gas or diesel engines of the following vehicles:
Audi (4 and 5 cylinder), BMW, Chevrolet, Chrysler, Ford, GMC, Honda, Hyundai, Infiniti, Lexus, Lincoln, Mazda, Mitsubishi, Nissan, Porsche (924, 928), Saturn, Volkswagen , (4, 5, 6-cylinder) as well as for most other engines with available valve springs for valves...

22 pcs Injector shaft cleaning set, 01110A916

Features:

To clean the injector shafts and seat as well as the injector surface.

Ensure precise timing with this Engine Timing Chain Tool Set for Vauxhall/Opel 1.0/1.4/1.5 petrol engines. Essential for locking camshafts during timing chain replacement.

Applications: Vauxhall/Opel: Adam (2014 – 2019); Astra-K (2015 – 2019); Corsa-E (2015 – 2019); Insignia-B (2017 – 2020); Mokka X (2016 – 2019); Viva (Karl) (2015 – 2020)

Equivalent to OEM tools EN-51367, EN-51298, EN-51632.

Made in China.

• Precision Timing
• Wide Application
• OEM Equivalent

Hose remover plier 25mm with wrench, 03M00205W

For easy removal hose fuel and vacuum system
Working part: 25 mm
Key size: 8 x 10 mm
Hose dimensions: 4 - 12.5 mm (5/32 "- 1/2")

Made in: Taiwan