ENGINE TIMING TOOLS

Petrol Engine Setting/Locking Kit - BMW N42/N46/N46T 1.6, 1.8, 2.0 chain drive
This timing locking tool set is ideal for timing and adjustment of the twin camshaft on petrol engines. It is also ideal for removing, installing and aligning of vanos unit.
This tool set is crafted by hardened and tempered carbon steel, ensuring its maximum durability for years of use.
Delivery Includes: (BMW OEM-number below for your reference)
1 pc Fixing bridge cam = OEM 119291
1 pc Fixing angle camshafts = OEM 119292
1 pc Fixing screw = as OEM 119293
1 pc Camshaft rotation key = as OEM 19270
1 pc Fixing strip encoder wheels = same as OEM 119350
1 pc Clamping tool = like OEM 119340
1 pc Crankshaft Staking shaft (straight) = as OEM 112300
1 pc Crankshaft Stakeout shaft (angled) = as OEM 119190
Fits the Following BMW - models :
E46 : 316i B18 / B18A; E87 : 118i / 120i; E60 : 520i; E83 X3 2.0; E85 : Z4 2.0; E90/E91 : 318i / 318ti / 320i
Fits the following engine code :N42 , N46 , N46T , B18/-A , B20/-A/-B
Made in China

Camshaft alignment tool - BMW M52TU/M54/M56
This tool set contains a comprehensive set of tools to perform camshaft timing on BMW M52TU, M54, M56 engines.
The kit includes the following:
- For BMW Double VANOS Camshaft Alignment Tool M52TU M54 M56 6-cylinder engines utilized from 1998 onwards
Include:
1) (ref.#116150) Alignment Jig: Adjusting plate for setting valve timing on engine with double Vanos.
2) (ref.#116180) Sprocket Assembly Jig: Use for preassembling secondary chain sprockets with chain on camshafts.
3) (ref.#114220) Rigid Chain Tensioner: Use to tension primary chain.
4) (ref.#113292) Chain Tensioner Lock Pin: Locks chain tensioner during timing.
5) (ref.#113450) VANOS Compressed Air Connection: Use to pressurize the single and double Vanos unit when checking or removing and replacing.
Applicable: for BMW 6 cylinder engine: M52TU (1998-2000), M54 (2001-2004), & M56 (2003 to present).
- For BMW 4 & 6 Cylinder Camshaft Alignment / Timing Tools. Include:
6) (ref.#113240) Camshaft Locking Fixture: Aligns and holds the camshaft in position when assembling cylinder head and replacing timing chain.
Engines: M42, M44, M50, M52, M52TU, M54, M56, S50US, S52US.
7) (ref.#112300)Top Dead Center Pin: Use to lock the flywheel at Top Dead Center when removing or replacing the camshafts or VANOS assemblies.
Engines: M42, M43, M44, M50, M52, M52TU, M54, M56, M60, M62, M70, M73, S50B30, S50B32, S54, S62.
8) (ref.#115490)VANOS Turning Wrench: Use to adjust VANOS position on single VANOS engines when removing or installing.
Engines: M50, M52, S50US, S52US.

Made in: China

7-Drawer Roller Tool Cabinet & 224 pcs tools

Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake

Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13  мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm  Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent  90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g

Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm

Made in China

53-118 mm Oil filter wrench, 63153118

Capacity: 53 - 118 mm.
Spring and cam locking mechanisms
Chrome-plated drop forged steel
Length: 230 mm
Produced by Pard, Taiwan

75mm 15-pt. Oil filter wrench, 6317515

Applicable: GM, CHRYSLER

Origin: Force, Taiwan

3/4"Dr. 12-pt. Flank socket 65 mm, 50469

Specially for the hub nuts on transit vans.

Size: 65 mm

Material: Cr-V

Made in China

1/2"Dr Injection Line socket

Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW Diesel engines and OPEL 2.5 TD engines.
Material: Cr-V
Size: 14; 17; 19 mm ...

Effortlessly remove stuck injectors with our Diesel Injector Puller Set for Citroen and Peugeot 2.0/2.2HDi 16V engines. Avoid cylinder head removal!

• Perfect for engine codes: DW10ATED4, DW10ATED/L4, DW10JATED4, DW12ATED4/L4.
• Includes a massive bridge to protect the engine block.
• Comes with injector sockets, screws, nut puller, and more for comprehensive use.

BMW Common rail injector set, 50630

Special tool pulling out stuck injectors
with BMW Diesel Engine Code with M47TU / M 47T2 / M57 / M57TU / M 57T2
The support on the cylinder head enables high pull-off
disassembly of the cylinder head is therefore not necessary
The particular form of puller allows safe and precise extraction, especially in very tight injectors / injectors.
Contents
- 2 support feet 115 mm
- 2 support feet 140 mm
- Supporting bridge with ball bearing
- Spindle M16 with unilateral M17 thread for mounting in the injector
- 29mm socket wrench for removing the electrical unit
- Allen key for removing the injector needle
For the following BMW - types
In contrast to solutions with impact hammer, the injectors are removed with this tool by even train and in the optimum position for installation position.
E38: 730 d
E87: 118 d / 120 d
E46: 318 d / 320 d / 330 d
E39: 520 d / 525 d / 530 d
E60/E61: 520 d / 525 d / 525 xd / 530 d / 530 xd / 535 d
E63/E64: 635 d ( 04-10 )
E38/E65/E66: 730 d
E83: X3 2.0 d / 3.0 d
E53/E70: X5 3.0 d
E90/E91: 316 d / 320 d
E90/E91/E92/E93: 325 d ( 06-10 ), 330 d / xd ( 98-08 ), 335 d
This also applies to same engine in a Land Rover - types such as
Range Rover: 2.5 DT   Year 1994 - 2002
Range Rover: 3.0 TD6   2002 - 2006
Freelander: 2.0 TD4   2002 - 2006...

2 pcs Vacuum cup valve grinder, 50104
For hand use, grinding flat head, unslotted valves.
Suitable for small and large vehicles.
Hardwood handles for easy hand lapping of engine valves.
• Synthetic rubber vacuum cups are resistant to oil, grease, gasoline and are replaceable.
• 1-1/8” & 1-3/8” dia. cups.
• 5/8” & 13/16” dia. cups.

Chain Breaker and reverting tool, 50095
Hardened Steel Body Construction. Designed to rivet chain links to form an endless chain.
Versatile enough to be used on cam chain to drive chains or as a chain breaker by pushing the pin out.
Breaks and Rivets/ Stakes all over head cam chains on all model Japanese and European OHV Cam
This chain breaker kit includes: 3 pin sizes to fit a variety of chains. This tool will break and rivet 420- 630 rear drive chains. It comes with 2mm, 3mm, 4mm, and replacement tips for different size Cam Chains
Contents:
1 x Chain Press;
1 x Handle;
1 x Long Lever;
3 x Anvils;
1 x Press Plate;
3 x Chain Pins;
1 x Rivet Pin;
1 x Spring

Made in China

Spark plug terminal pliers 9G0101

Features:

• Safely remove spark plug cables and prevent cable damage.
• Pliers handles and jaws are coated with a heavy-duy plastic for a sure grip.

Produced by Force, Taiwan

Oil filter pliers, 639300

Capacity: 85 - 115 mm

Produced by Pard, Taiwan