ENGINE TIMING TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
BMW N47/N57 2.0, 3.0 - Chain Drive - Diesel Engine Setting/locking Kit, 50344A
Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A
Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.
Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)
Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0
OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760
Made in China
4 Pcs Truck Diesel Injector Socket Set, 50650
4 Pcs Truck Diesel Injector Socket Set, 50650
Contains:
1 pc Hex 32mm x 70mm x 4 teeth (with M14 x 1.5 receiver thread) for Mercedes-Benz, Neoplan and Setra.
1 pc 1/2"Dr. x 72mm x 4 teeth for Mercedes-Benz.
1 pc Hex 32mm x 120mm x 4 tooth for MAN and Mercedes-Benz.
1 pc 1/2"Dr. x 120mm x 3 teeth for MAN and Mercedes-Benz.
Also suitable for some Iveco, Scania and Renault commercial vehicles.
Made in China
Piston Ring Compressor 60-175 mm, 50091
Piston Ring Compressor 60-175 mm, 50091
With Safety valve Special spring steel
Ratchet type complete with hex spanner
Capacity: 60-175mm
Height: 150mm (6")
Made in China
VAG Cam Chain Tensioner Locking Tool, 058-62237
VAG Cam Chain Tensioner Locking Tool, 058-62237
Compresses the camshaft chain tensioner safely and easily when removing camshafts or replacing the tensioner or its gasket. These tasks are virtually impossible without the correct tool.
The tool threads into the guide, compressing the tensioner, relieving chain tension.
The no-mar plastic contact surface will not harm the tensioner face.
Applicable:
Audi: A4, A6, A8, TT, S4, S6, RS6
Seat: Ibiza, Cordoba, Leon, Toledo, Alhambra
Skoda: Octavia
Volkswagen: Polo, Golf, Jetta, Passat, Beetle, Touareg
Engine Codes: ADR, AEB, AFY, AGN, AGU, AHA, AJE, AJH, AJL, AJP, AJQ, AMB, AMK, AMU, ANB, APB, APG, APH, APP, APT, APU, APX, ARH, ARK, ARX, ARY, ARZ, ATC, ATQ, AUM, AUQ, AVC, AWC, AWM, AWN, AWP, AWT, AWV, AYP, BAM, BBD, BCY, BEA, BEL, BFM, BKF, BNU
OEM №: 3366
Made in Taiwan
VAG 3.0 / 2.9 TFSI (EA839) - Engine Timing Tool Set, 51039
VAG 3.0 / 2.9 TFSI (EA839) - Engine Timing Tool Set, 51039
Features:
Designed to fix the camshafts in position when removing and installing the camshaft timing chains.
Suitable for VAG 6-cylinder 3.0, 2.9 4-valve TFSI (EA839) petrol engines.
Applications:
Audi: A6 (2019-); A7 (2018-); A8 (2019-); Q7 (2019-); Q8 (2019-); S4 (2016-); S5 (2016-); SQ5 (2017-); RS4 (2017-); RS5 (2017-)
VW: Touareg III (2018-)
Engine codes: CWGD; DECA; CZSA; CZSE; DLZA; DCBD; DCBE
OEM No. T40331
Made in China
Renault, Nissan 1.6 Dci - Engine Timing Tool Kit, 51024
Renault, Nissan 1.6 Dci - Engine Timing Tool Kit, 51024
Features:
Used to hold the camshaft and crankshaft while setting engine timing.
Suitable for Renault, Nissan 1.6 dCi R9M diesel engines from 2011 onwards.
Also suitable for Mercedes-Benz, Opel / Vauxhall 1.6 R9M diesel engines from 2014 onwards.
Applications:
Renault: Espace V (2015-), Fluence (2013-), Kadjar (2015-), Koleos II (2017-), Megane III (2012-2014), Megane IV (2016-), Scenic / Grand Scenic III (2011-2016), Scenic/Grand Scenic IV (2016-), Talisman (2015-), Trafic III (2014-)
Nissan: NV300 (2016-), Qashqai / Qashqai+2 (2011-2014), Qashqai (2014-2021), X-Trail (2014-)
Mercedes-Benz: C-Class (2014-2018), Vito (2014-)
Opel / Vauxhall: Vivaro-B (2014-2019)
Engine codes: R9M 402, R9M 404, R9M 408, R9M 409, R9M 410, R9M 413, R9M 414, R9M 415, R9M 450, R9M 452, R9M 453, 622.951 (R9M), 626.951 (R9M).
OEM#: MOT 1969 / EN-51248 / 626 589 04 40 00, MOT 1970 / EN-51241 / 626 589 00 15 00
Made in China
VAG 1.8 / 2.0 TFSI (EA888) - Timing Chain Tensioner Lever, 51007
VAG 1.8 / 2.0 TFSI (EA888) - Timing Chain Tensioner Lever, 51007
Allows the timing chain tensioner to be retracted and locked without removing the lower timing cover
Required when replacing the timing chain
Suitable for the following engines / models (TFSI from 2007):
Audi A3, A3 Cabrio, TT, Q3
Seat Alhambra, Altea Freetrack, Exeo, Leon FR, Toledo
Octavia II, IIII Superb (3T), Yeti
Volkswagen Eos, Golf VII, Passat (B6), Passat CC, Passat, Sharan, Beetle, Scirocco, Tiguan
Applicable:
For 1.8 R4 16v TSI / TFSI (EA888):
Audi TT Mk2 (8J), 8P Audi A3, B7 Audi A4, Audi A4 (B8), Audi A5
SEAT Leon Mk2 (1P), SEAT Altea XL
Yeti, Octavia Mk2 (1Z, Ming Rui), Skoda Superb Mk2 (3T)
VW Jetta Mk5 / Sagitar, VW Passat B6, VW Passat CC
For R4 2.0 16v TSI / TFSI (EA888):
VW Golf GTI Mk5; VW Golf GTI Mk6; VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, Volkswagen CC, VW Scirocco, VW Golf GTI Mk6, VW Scirocco, VW Passat B6, Volkswagen CC
Audi A3 (8P), Audi A3 Cabriolet, Audi TT, Audi A4 (B8), Q5, Audi A5, Q5, Audi TT Mk2 (8J), Q3 Audi
Skoda Superb Mk2 (3T), Octavia
SEAT Altea Freetrack SEAT Leon FR, SEAT Exeo
Engine codes (1.8L engines): SADC, ACHD, CDHB, CJEB, CCRDC, CGYA
Engine codes (2.0L engines): CCZA, CDNB, CDNC, CFKA, CCZC, CPSA, CESA, CETA, CCZB, CDND, CCZD
OEM tool: T40243
Length: 480mm
Made in China
13pcs Diesel and Petrol engine timing tool set, 50381
13pcs Diesel and Petrol engine timing tool set, 50381
For setting and locking to regain top dead centre and use setting tools to re-check correct alignment.
After use, remove all setting pins & locking plates. Turn the engine over twice by hand to complete a full cycle. Regain T.D.C. (top dead center) & insert setting tools to re-check the alignment is correct. Remove setting tools and check there is no obstruction by turning the engine over twice by hand again to complete a full cycle.
Applicable to: Audi, Citroen, Peugeot, Volkswagen and Volvo diesel and petrol engined cars and light commercial vehicles.
Made in China
Mercedes-Benz Camshaft Adjuster Control Valve Socket T100H, 50837
Mercedes-Benz Camshaft Adjuster Control Valve Socket T100H, 50837
Designed for removal and installation of the camshaft adjuster control valve.
Suitable for Mercedes-Benz M133, M157, M176, M177, M178, M256, M264, M270, M271.8, M271.9, MG272, MG273, M274, M276 and M278 petrol engines.
Size: 1/2" Dr. x T100H
L: 78mm
Material: Cr-Mo
Made in China
Angled Relay pliers, 50815A
Angled Relay pliers, 50815A
For use in more automobiles
This unique tool has been developed to id in the removal and installation for most types of relays.
Most relays are often located in confined areas making them difficult to reach. In many cases these relays are also grouped close together and difficult for hand removal. The pliers have specially coated tips for a solid grip required in removing and installing relays.
Ideal for tight plugged relays.
Self-opening, spring loaded with plastic handle.
Fits on most relays.
Applications: Chrysler, Ford, Mazda, Mercedes-Benz, Nissan, Vauxhall/Opel, Volkswagen.
Made in China
Straight Relay pliers, 50815
Straight Relay pliers, 50815
Use for disassembly and assembly of automotive relays.
Allow adequate grip to be applied to enable removal of electrical relays that are fitted in difficult to access areas.
Ideal for tight plugged relays.
Self-opening, spring loaded with plastic handle.
Fits on most relays.
Applications: Chrysler, Ford, Mazda, Mercedes-Benz, Nissan, Vauxhall/Opel, Volkswagen.
Made in China
5pcs Fuel Injection Pump tool Set for VW, Audi, Skoda, Seat TDI, 50639A
5pcs Fuel Injection Pump tool Set for VW, Audi, Skoda, Seat TDI, 50639A
Diesel injection pump special socket set is used when loosening and removing the triangular head screws on the injection pump.
Application: For Bosch diesel injection pump VE (Bosch VE), VP EDC TDI (Bosch TDI), and VP 37 (Bosch CR).
Contents:
For central closing plug of Bosch VE.
Governing pressure socket of Bosch VE.
For bearing screw governing lever of Bosch VE.
For top cover screw of Bosch TDI.
For body of Bosch CR.
Sizes:
3/8" Dr. 6.5mm valve wrench
3/8" Dr. 7.5mm key
3/8" Dr. 13mm for fixing screws,
1/2" Dr. 26mm for central locking.
1pc Govening pressure socket 10mm, L77mm
Made in China
Renault, Opel/Vauxhall, Volvo, Mitsubishi, Chrysler - Engine timing tool set, 50596
Renault, Opel/Vauxhall, Volvo, Mitsubishi, Chrysler - Engine timing tool set, 50596
Description: For adjusting the engine timing on Renault petrol and diesel engines.
Contents:
Camshaft locking tool, adjustable for DOHC engines
HP diesel pump locking pin, to be used as OEM Mot.910
Tensioner spanner, to be used as OEM Mot1135-01
Crankshaft locking pin, to be used as OEM Mot.1318
Crankshaft locking pin, to be used as OEM Mot.1054
Crankshaft locking pin, to be used as OEM Mot.910
Applicable:
Renault: Clio (1990-2013); Espace / Grand Espace (1996-2002); Extra / Rapid / Express (1991-2002); Kangoo (1998-2009); Laguna (1994-2001); Megane (1995-2003); Scenic (1996-2003); Modus / Grand Modus II (2004-2013); Safrane (1992-2001); Trafic (1997-2000); Master II (2000-2003); Twingo (2000-2013); Wind (2011-2013)
Opel: Arena (1997-2001); Movano-A (1999-2006); Vivaro (2001-2007)
Volvo: S40 (1996-2004); V40 (1996-2004)
Mitsubishi: Carisma (2001-2005); Space Star (2000-2006)
Chrysler: Cherokee (1984-1995); Wrangler (1988-1995)
Engine codes:
E7F 1.2: 700, 704, 706, 708, 750
D4F 1.2 16v: 702 / 704 / 706 / 708 / 712 / 714 / 716 / 722 / 728 / 730 / 740 / 742 / 764 / 772 / 780 / 782 / 784 / 786
E7J 1.4: 601 / 624 / 626 / 634 / 635 / 710 / 711 / 716 / 718 / 719 / 754 / 756 / 757 / 764 / 780
F3P 1.8: 674 / 676 / 678 / 710 / 712 / 714 / 720 / 724 / 755 / 758 / B670 / Q7 / R7 / S724
F7P 1.8 16v: 720 / 722
F8Q 1.9D/Di/Turbo: 600 / 606 / 620 / 622 / 624 / 630 / 632 / 644 / 646 / 648 / 662 / 672 /676 / 678 / 680 / 682 / 684 / 692 /696 / 714 / 722 / 724 / 730 / 732 / 776 / 784 / 786 / 788 / 790 / B640
F9Q 1.9D dTi: F9Q1 / F9Q2 / 710 / 716 / 717 / 720 / 722 / 730 / 731 / 734 / 736 / 744 / 760 / 762 / 770 / 774 / 780 / 782 / 790 D4192T / D4191T2 D4192T3 / D4192T4
F3R 2.0: 611 / 722 / 723 / 742 / 750 / 751 / 752 / 768 / 769 / 791 / 796 / 797 / 798
J7R 2.0: 732 / 733 / 734 / 735
F7R 2.0 16V: 700 / 714 / D710
J7T 2.2 16V: 760 / 761
G8T 2.2D/Turbo: 706 / 714 / 716 / 740 / 752 / 760 / 790 / 792 / 794
OEM Tools:
To be used as OEM1 MOT910 | MOT1135-01 | MOT1318 | MOT1054 | MOT910 Renault
To be used as OEM2 MOT910 | MOT1135-01 | MOT1318 | MOT1054 | MOT910 Opel / Vauxhall
To be used as OEM3 MOT910 | MOT1135-01 | MOT1318 | MOT1054 | MOT910 Volvo
To be used as OEM4 MOT910 | MOT1135-01 | MOT1318 | MOT1054 | MOT910 Mitsubishi
To be used as OEM5 MOT910 | MOT1135-01 | MOT1318 | MOT1054 | MOT910 Chrysler
Made in China
Valve Spring Compressor Kit, 50590
Valve Spring Compressor Kit, 50590
Designed to remove and install valve springs and valve stem seals without removing cylinder head.
Air pressure helps prevent the valve from falling into the combustion chamber.
Adapters: 23mm, 25mm, 30mm.
Made in China
Ford 1.5L EcoBoost -Engine Timing Tool Set, 50584
Ford 1.5L EcoBoost -Engine Timing Tool Set, 50584
For locking camshaft and flywheel on Ford inline 3-cylinder 1.5L EcoBoost engines.
Application:
Ford Focus (2018-)
Fiesta (2018-)
Escape (2020-)
OEM#: 303-1643, 303-1649
Made in China
Telescopic Inspection Mirror with LED, 50520
Telescopic Inspection Mirror with LED, 50520
Extends to a maximum length of 880 mm
Mirror size: 42x65 mm
Length: min. 290 – max. 885 mm
Made in China
Code: 5060100
