ENGINE TIMING TOOLS

Piston ring compressor 90-175 mm, HS-E1091B

Capacity: 90-175 mm

Quick release button.

Made of good quality spring steel.

Operated by the 1/4"drive key (included)

Made in China

Overhead valve spring compressor, HS3422

Description: This overhead valve spring compressor is ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompressing the tool then remove spring. It features a reversible jaw / adaptor and automatic cam-action locking to a re-determined setting.
Specifications:
Easy to operate
Cam action level design for secure valve spring locking into the tool
Allow valve springs and valve stem oil seals to be replaced with the cylinder head
Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications
For use on a wide range of OHV, OHC and CHV engines.
Not suitable for use on engines with deep seated valves

Made in China

Volvo 2.0 - Diesel Engine Timing Tool Kit, 50983

Features: To lock and hold the crankshaft and high pressure fuel pump on the current range of Volvo 2.0L diesel engines in the method specified by the manufacturer.
The kit includes all the special tools required to time the engine when performing a timing belt change.
Applications: Volvo S60 (2011-2018), S80 (2007-), S90 (2017-), V40 (2013-), V60 (2011-2018), V70 (2008-), V90 (2017-), XC40 (2017-), XC60 (2014-), XC70 (2008-), XC90 (2016-).
Engine codes: D4204T11, D4204T12, D4204T14, D4204T16, D4204T17, D4204T20, D4204T23, D4204T4, D4204T5, D4204T6, D4204T8, D4204T9.

OEM No.: 999 7495, 999 7233

Made in China

Ford Transit 2.0TDCi - 32mm Diesel Fuel Filter Socket, 50980

Features: Used for remove and install th fuel filter on Ford EcoBlue 2.0 TDCi diesel engines from 2016. Cut out in the socket clears the fuel drain valve.
Size: 1/2"Dr.; 32 mm 6-pt.
Material: Cr-V (Chrome Vanadium)
Application:
Ford Transit Custom MK8 2.0TDCi 2016 onwards.

Made in China

23 Pcs Terminal Release Tool Kit, 50945

Allows users to easily remove terminals from electrical connectors.
Eliminates damage to wires or to terminal blocks.
Handles designed for extra grip and comfort.
Applicable for most vehicles.

Application:
No. 1: for BMW, Mercedes, Opel, VW/ Audi
No. 2: for BMW, Jaguar, Mercedes, Porsche, Saab, Seat, Skoda
No. 3: for BMW, Mercedes, Opel, Porsche, VW/ Audi
No. 4: for Ford
No. 5: for BMW, Ford, Mercedes, Opel, Porsche, Seat, Skoda, VW/ Audi
No. 6: for BMW, Ford, Jaguar, Mercedes, Opel, Porsche, Saab, Seat, Skoda, VW/Audi
No. 7: for Mercedes
No. 8: for Ford, Jaguar, Mercedes, Opel, Porsche, VW/Audi
No. 9: for Ford, Mercedes
No. 10: for Mercedes
No. 11: for BMW, Ford, Jaguar, Mercedes, Opel, Porsche, Saab, Seat, Skoda, VW/Audi
No. 12: for Opel, Renault, Skoda, VW/Audi
No. 13: for Ford, Mercedes
No. 14: for Ford, Jaguar, Porsche
No. 15: for BMW, Ford, Mercedes, Opel, Seat, Skoda, VW/Audi
No. 16: for BMW, Ford, Jaguar, Mercedes, Opel, Porsche, VW/Audi
No. 17: for BMW
No. 18: for Mercedes
No.19: for Citroen, Chrysler, Fiat, Ford, Honda, Mazda, Mercedes, Mitsubishi, Opel, Porsche, Renault, Seat, Toyota, VW/Audi
No. 20: for Ford
No. 21: for BMW, Ford, Jaguar, Mercedes, Opel, Porsche, Saab, Seat, Skoda, VW/Audi
No. 22: for Honda, Opel, Toyota, VW/Audi
No. 23: for Opel, VW/Audi

Made in China

Volvo T6 3.0 & 3.2 - Engine timing tool set, 50817          

Features: For Volvo T6 3.0 & 3.2 Engines             
Fitted to S80, XC60, XC70 & XC90 2007 on           
Designed for checking and adjusting the engine timing               
Fits on Volvo S80, XC90, XC60, XC70 3.0T, 3.2 with T6 engine as of 2007
Includes camshaft and crankshaft locking tool 
Contents:
Camshaft locking tool - OEM 999-7261 
Sprocket removal tool - OEM 999-7263/7264/7272         
Camshaft alignment tool - OEM 999-7257           
Also fits Land Rover 3.2 i6 2006 on          
Camshaft locking tool - OEM 303-1223 
Sprocket removal tool - OEM 303-1225/6
Camshaft alignment tool OEM 303-1219

Made in China

11 pcs Universal Clutch Alignment Tool Kit, 50808

Suitable for a wide range of vehicle including some light commercial vehicles. Screw action provides fast adjustment for required hub diameter. Eight interchangeable spigot adaptors aid close alignment.
Contents:
3 pcs Expanding mandrels: Ø15 - 19mm, Ø20 - 26mm, Ø23 - 36mm
8 pcs Centring bushes: 12, 14, 15, 16, 17, 18, 19 and 20mm (O/D)

Made in China

VAG 1.4 TSI Auxiliary Belt Tensioner Spanner, 50775

Specially designed spanner to allow for access to the auxiliary belt tensioner where access is limited
Used for loosening poly V-belt by turning auxiliary belt tensioner.
Jaw opening: 16mm.
Application: Audi, Seat, Škoda and Volkswagen with 1.4 TSI and TSi Blue Motion engines(1.4L 4-cylinder direct injection engine, turbocharger and supercharger).
Applicable to: Audi: A1 Sport back / 12-15 | A3 / 13-15 | A3 Sport back / 12-15.
Engine Codes : ACT | CPTA | CGGA | CHPA | CMBA | CPTA | CPVA | CRJA | CXSA
OEM No.: T10447

Made in China

Clutch Alignment Mandrels, 50681

Suitable for cars and light commercial vehicles.
Fast hub diameter adjustment achieved via screw action.
Adjustable from 15-19mm and 20-26mm diameter.

Made in China

Air Conditioning Compressor Clutch Puller Set, 50677

Features:
Professional A/C Compressor Clutch Remover Kit.
Replaces clutches found on FS6, C171, 6P & 148 compressors GM R4 & A6, HR-6, DA-6 & V5 A/C compressors.
Sanden compressors SD505, 507, 510, 575, 708 & 709.
2 & 3 hole puller plate fits most clutches, mechanical force does the pulling.

Made in China

VAG - Timing Belt Tensioner Wrench, 50669

For adjusting the timing belt at the tensioner roller.
Suitable for Audi, Volkswagen, Seat, Škoda vehicles.
Distance of pins: 18 mm
Pin diameter: 3mm
OEM#: 3387

Made in China

60 - 80mm Reversible Oil Filter Wrench, 50666

Features:
2 jaws with teeth provide a strong grip and are not easy to slide. The wrench can hold half of the filter for greater grip and reduce the risk of sliding if the filter is stubborn or damaged.
Reduce time-consuming disassembly and stubborn filter disassembly. Spring-loaded for easy installation and disassembly.
Is used with half bending rod or ratchet wrench.
Rigid high carbon steel with a spring that has strong elasticity and is durable..
Specification:
Special design allows the oil filter to be removed and installed quickly and easily.
Steel jaws securely grip oil filter without slipping.
Fits sizes 60mm - 80mm.
Use with 1/2" drive.
Reversible.

Made in China

BMW N-series Crankshaft Locking Tool, 50575

Used to lock crankshaft when releasing or tightening the central bolt.
Suitable for BMW N12, N14, N40, N42, N45, N46, N52, N52, N53, N54 engines.
OEM#: 11 9 280

Made in China

BMW N20/N26 Flywheel Locking Tool, 50570

Description:
Great for Replacing The Timing Chain.
Works on BMW N20 and N26 engines.
Used for securing the crankshaft with the transmission installed(connected to engine)
Comparable to BMW Factory Tool No. 83302222742
(Note: Automatic transmissions only.)
Features:
While replacing the timing chain, this tool can hold the flywheel;
It helps to release and tighten down the central bolts on the vibration damper.
Application:
BMW 125i N20 2012-2017;
BMW 220i N20 2014-2018
BMW 225i N20 2014-2017
BMW 228i N20 2014-2016
BMW 320i N20 2012-2015
BMW 320i GT N20 2013-2016
BMW 328i N20 2011-2016
BMW 328i GT N20 2013-2016
BMW 520i N20 2011-2016
BMW 520Li N20 2013-2016
BMW 525Li N20 2013-2016
BMW 528i N20 2011-2017
BMW X1 xDrive/sDrive20i N20 2011-2015
BMW X1 xDrive/sDrive28i N20 2011-2015
BMW X3 N20 2013-2018
BMW X3 xDrive20i N20 2011-2018
BMW X3 xDrive28i N20 2012-2018
BMW X4 xDrive20i N20 2014-2017
BMW Z4 N20 2013-2015
BMW Z4 sDrive20i N20 2011-2016
BMW Z4 sDrive28i N20 2011-2016
BMW 328i / 328iX N26 2012-2016
BMW 228i / 228iX N26 2012-2016

Made in China

VAG 1.8;2.0 TFSI Camshaft Central Valve Removal Socket Kit, 50553

Description: Used for removal and installation of 4/3-way central valve for camshaft adjustment on 1.8 & 2.0 generation III TFSI engines..5 sizes with unique 2-pin positions. All with 3/8" square drive. Same as tool #T10352 special tools for VW AUDI Q5 2.0T MAGOTAN positive CC timing T10352/1 B8 A6L A8"

Applications:

Audi A3 with 4-cylinder gas direct injection, 1.8 liter, 2.0 liter ,4v, TFSI engine with chain. Passat 2006>, Passat CC 2009>, Audi A3 2004> 4-cyl. injection engine (1.8 liter and 2.0 liter engine, chain drive). Audi A4 2008 >, Audi A5 Cabriolet 2009 >, Audi A5 Coupe 2008 >, Audi Q5 2008 >, Audi A3 2012. 4-cyl. 1.8l, 2.0l 4V TFSI direct injection engine- generation II

OEM No. T10352, T10352/1, T10352/2, T10352/3, T10352/4

Made in China