ENGINE TIMING TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
BMW N47/N57 2.0, 3.0 - Chain Drive - Diesel Engine Setting/locking Kit, 50344A
Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A
Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.
Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)
Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0
OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760
Made in China
Clutch Alignment Mandrels, 50681
Clutch Alignment Mandrels, 50681
Suitable for cars and light commercial vehicles.
Fast hub diameter adjustment achieved via screw action.
Adjustable from 15-19mm and 20-26mm diameter.
Made in China
Air Conditioning Compressor Clutch Puller Set, 50677
Air Conditioning Compressor Clutch Puller Set, 50677
Features:
Professional A/C Compressor Clutch Remover Kit.
Replaces clutches found on FS6, C171, 6P & 148 compressors GM R4 & A6, HR-6, DA-6 & V5 A/C compressors.
Sanden compressors SD505, 507, 510, 575, 708 & 709.
2 & 3 hole puller plate fits most clutches, mechanical force does the pulling.
Made in China
VAG - Timing Belt Tensioner Wrench, 50669
VAG - Timing Belt Tensioner Wrench, 50669
For adjusting the timing belt at the tensioner roller.
Suitable for Audi, Volkswagen, Seat, Škoda vehicles.
Distance of pins: 18 mm
Pin diameter: 3mm
OEM#: 3387
Made in China
60 - 80mm Reversible Oil Filter Wrench, 50666
60 - 80mm Reversible Oil Filter Wrench, 50666
Features:
2 jaws with teeth provide a strong grip and are not easy to slide. The wrench can hold half of the filter for greater grip and reduce the risk of sliding if the filter is stubborn or damaged.
Reduce time-consuming disassembly and stubborn filter disassembly. Spring-loaded for easy installation and disassembly.
Is used with half bending rod or ratchet wrench.
Rigid high carbon steel with a spring that has strong elasticity and is durable..
Specification:
Special design allows the oil filter to be removed and installed quickly and easily.
Steel jaws securely grip oil filter without slipping.
Fits sizes 60mm - 80mm.
Use with 1/2" drive.
Reversible.
Made in China
BMW N-series Crankshaft Locking Tool, 50575
BMW N-series Crankshaft Locking Tool, 50575
Used to lock crankshaft when releasing or tightening the central bolt.
Suitable for BMW N12, N14, N40, N42, N45, N46, N52, N52, N53, N54 engines.
OEM#: 11 9 280
Made in China
BMW N20/N26 Flywheel Locking Tool, 50570
BMW N20/N26 Flywheel Locking Tool, 50570
Description:
Great for Replacing The Timing Chain.
Works on BMW N20 and N26 engines.
Used for securing the crankshaft with the transmission installed(connected to engine)
Comparable to BMW Factory Tool No. 83302222742
(Note: Automatic transmissions only.)
Features:
While replacing the timing chain, this tool can hold the flywheel;
It helps to release and tighten down the central bolts on the vibration damper.
Application:
BMW 125i N20 2012-2017;
BMW 220i N20 2014-2018
BMW 225i N20 2014-2017
BMW 228i N20 2014-2016
BMW 320i N20 2012-2015
BMW 320i GT N20 2013-2016
BMW 328i N20 2011-2016
BMW 328i GT N20 2013-2016
BMW 520i N20 2011-2016
BMW 520Li N20 2013-2016
BMW 525Li N20 2013-2016
BMW 528i N20 2011-2017
BMW X1 xDrive/sDrive20i N20 2011-2015
BMW X1 xDrive/sDrive28i N20 2011-2015
BMW X3 N20 2013-2018
BMW X3 xDrive20i N20 2011-2018
BMW X3 xDrive28i N20 2012-2018
BMW X4 xDrive20i N20 2014-2017
BMW Z4 N20 2013-2015
BMW Z4 sDrive20i N20 2011-2016
BMW Z4 sDrive28i N20 2011-2016
BMW 328i / 328iX N26 2012-2016
BMW 228i / 228iX N26 2012-2016
Made in China
VAG 1.8;2.0 TFSI Camshaft Central Valve Removal Socket Kit, 50553
VAG 1.8;2.0 TFSI Camshaft Central Valve Removal Socket Kit, 50553
Description: Used for removal and installation of 4/3-way central valve for camshaft adjustment on 1.8 & 2.0 generation III TFSI engines..5 sizes with unique 2-pin positions. All with 3/8" square drive. Same as tool #T10352 special tools for VW AUDI Q5 2.0T MAGOTAN positive CC timing T10352/1 B8 A6L A8"
Applications:
Audi A3 with 4-cylinder gas direct injection, 1.8 liter, 2.0 liter ,4v, TFSI engine with chain. Passat 2006>, Passat CC 2009>, Audi A3 2004> 4-cyl. injection engine (1.8 liter and 2.0 liter engine, chain drive). Audi A4 2008 >, Audi A5 Cabriolet 2009 >, Audi A5 Coupe 2008 >, Audi Q5 2008 >, Audi A3 2012. 4-cyl. 1.8l, 2.0l 4V TFSI direct injection engine- generation II
OEM No. T10352, T10352/1, T10352/2, T10352/3, T10352/4
Made in China
VW 1.8; 2.0 TFSI Camshaft Locking Tool, 50522
VW 1.8; 2.0 TFSI Camshaft Locking Tool, 50522
Description:
The camshaft sprockets locking tool is used for locking the intake and exhaust camshafts when loosening the central screw.
Application: VW 1.8 TFSI / 2.0 TFSI
Engine code : CABD, CAEA, CDNB, CDNA, CAWA, CBFA, CCTA, CCZA, CAEB, CDNC, CDHA, CABA, BYT, BZB, CDAA, CABB, CDHB
Made in China
10 pcs Car Clutch Alignment Tool Set, 50636
10 pcs Car Clutch Alignment Tool Set, 50636
The set includes 8 centering pieces for insertion into the crankshaft bearing and a conically turned sleeve for receiving the clutch disc.
Features:
Faster, easier replacement of clutches.
Align clutch plates and pilotbearings accurately.
Centering shaft with clutch plate adaptor.
Adapter fits through clutch plate and into pilot bushing or bearing.
Electroplated for corrosion resistance, long lasting and durable construction.
For quick centering of the clutch disc on vehicles with pilot bearings.
Ensures a clean placement of the gearbox
Prevents unbalance of the coupling due to staggered installation.
Suitable for Audi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Seat, Skoda, Subaru, Toyota, Vauxhall
Weight: 830g
Made in China
Volvo B4204 Camshaft Alignment Tools, 50389
Volvo B4204 Camshaft Alignment Tools, 50389
For aligning the camshaft and crankshaft with correct positioning into the side cover of the newest Volvo B4204 engines (8-speed transmission)
Application:
Volvo S60 (since 2011)
Volvo S60L (since 2007)
Volvo S80 (since 2007)
Volvo V40 (since 2013)
Volvo V40 Cross Country (since 2008)
Volvo V60 (since 2008)
Volvo V60 Cross Country (since 2008)
Volvo V70 (since 2008)
Volvo XC60 (since 2008)
Volvo XC70 (since 2008)
Volvo XC70 (since 2016)
Engine Codes: B4154T2, B4154T3, B4154T4, B4154T5, B4154T6, B4204T10, B4204T11, B4204T12, B4204T14, B4204T15, B4204T17, B4204T18, B4204T19, B4204T20, B4204T21, B4204T23, B4204T26, B4204T27, B4204T28, B4204T29, B4204T31, B4204T32, B4204T33, B4204T34, B4204T35, B4204T36, B4204T37, B4204T38, B4204T41, B4204T43, B4204T44, B4204T9
OEM No.: 9997490, 9997493, 9997495, 9997496, 9997497
Made in China
Clutch Alignment Tools, 50362
Clutch Alignment Tools, 50362
Professional clutch alignment set.
Contents spigot adaptors: Ø 10.6 to 20mm, guide sleeves: Ø 13.7 to 26mm
For fast accurate alignment of pilot hole flywheels and clutch plate when assembling to car.
Facilitates the alignment of clutch for assembly, while vehicle maintenance.
Precision manufactured steel bushes with chemically blackened steel finish.
Application: Audi, Citroen, FIAT, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Toyota, Vauxhall, VW, Volvo.
Made in China
GM Opel 2,8i; 3,6i V6 - Engine timing tool set, 50349
GM Opel 2,8i; 3,6i V6 - Engine timing tool set, 50349
Designed to lock the camshafts on the Vauxhall engines listed in the applications provided. Plates are oversized to prevent the valve covers being installed should the tools be accidentally left on the engine.
Applications: Vauxhall, Opel, Saab, Cadillac, Holden 2.8i, 3.6i V6
2007-2011 GMC Acadia, Buick Lacrosse, Cadillac CTS, SRX and STS
2007-2009 Pontiac G6 and Saturn AURA
2007-2010 Saturn OUTLOOK
2008-2009 Pontiac Torrent;
Engines: LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, B284L.
OEM No. EN-48383 (A=EN-48383-1, B = EN-48383-2, C=EN-48383-3)
Made in China
Step Drill 9x 5.5mm for Glow Plug Removal set, 50339-2
Step Drill 9x 5.5mm for Glow Plug Removal set, 50339-2
Size: 9x5.5mm
Material: HSS (High Speed Steel)
Made in China
Step Drill 7 x 5.5mm for Glow Plug Removal set, 50339-1
Step Drill 7 x 5.5mm for Glow Plug Removal set, 50339-1
Size: 7x5.5mm
Material: HSS (High Speed Steel)
Made in China
Toyota & Mitsubishi Master Engine timing set, 50319
Toyota & Mitsubishi Master Engine timing set, 50319
Master Engine Timing Tool Kit For Toyota & Mitsubishi and many other Japanese Engines
Applicable:
Toyota, Mitsubishi, Lexus, Hyundai Plus Many Other Models
Lexus GS, IS, LS, RX & SC
Land Cruiser, Prius, Auirs, Celica, Camry,
Hi-Lux, HiAce, Corolla , Yaris,
RAV4 MR2
Shogun, Pajero, Montero, Outlander
Colt, Galant, Lancer, Spacewagon
Volvo S40, V40.
Includes a large number of camshaft, crankshaft and idler locking tools.
Include a large range of required locking tools for cam belts chains and gears.
Contents a large number of camshaft, crankshaft and idler locking tools.
Also specifically compiled to include a large range of required locking tools for cam belts chains and gears.
Contents:
Crankshaft Pulley Holding Tool MD 990767.
Universal Handle 09330-0021.
Crankshaft Pulley Holding Tool 09278-54012.
Crankshaft Pulley Puller 09223-15030.
Crankshaft Pulley Puller 09213-54015.
Crankshaft Pulley Puller 09213-14010.
Camshaft Sprocket Puller 09951-05010.
Threaded Screws M8 x 65mm - 2pc.
Threaded Screws M8 x 116mm - 2pc.
Threaded Screws M8 x 106mm - 2pc.
Threaded Screws M8 x 88mm - 2pc.
Threaded Screws M6 x 80mm - 2pc.
Threaded Screws M8 x 55mm - 2pc.
M6 x 100mm - 2pc 09954-05061.
M6 x 30mm - 2pc 09954-05051.
Connector 09957-04010.
M10 x 1.25 Adaptor - 2pc 09955-05010.
M10 x 1.5 Adaptor - 2pc 09955-05020.
M12 x 1.25 Adaptor - 2pc 09955-05030.
M12 x 1.5 Adaptor - 2pc 09955-05040.
M8 x 75mm - 2pc 09954-05070.
M8 x 50mm - 2pc 09954-05021
M8 x 150mm - 2pc 09954-05041.
M5 x 100mm - 2pc 09954-05011.
M8 x 100mm - 2pc 09954-05031.
M8 x 225mm - 2pc 09954-05080
Pressure bolt 100 for Item G 09953-05010.
Pressure bolt 150 for Item G 09953-05020.
Legs for Item G 09952-05010.
Tensioner Wrench MD998738.
Made in China
