UNDER CAR TOOLS

Hydraulic Drive Shaft Remover/Press Set, 50127

Used to press drive shafts out of wheel hubs.
For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 98-125 mm diameter circle.
Especially for glued and rusty drive shafts.
Has a 10 ton capacity.

Applicable: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

Made in China

BMW - Differential Front Bush Extractor F Series, 50954

Features: This tool is used to extract and install the transversely mounted differential mounting bushing that is located in the rear subframe.
The service work can be performed on-car without the removal of the subframe.
Applicable:
BMW F01 — (2008–present) 7 Series
BMW F02 — (2009–present) 7 Series long wheelbase
BMW F04 — (2011–present) 7 Series ActiveHybrid
BMW F06 — (2011–present) 6 Series Gran Coupe/M6 Gran Coupe
BMW F07 — (2009–present) 5 Series Gran Turismo
BMW F10 — (2011–present) 5 Series Sedan/M5 Sedan
BMW F11 — (2012–present) 5 Series Touring
BMW F12 — (2011–present) 6 Series Coupe/M6 Coupe
BMW F13 — (2011–present) 6 Series Convertible/M6 Convertible
BMW F18 — (2010–present) 5 Series long wheelbase

Models: BMW F01 / F02 / F06 / F07 / F10 / F11 / F13

OEM Bush number: 33316792873

Made in China

BPW Rear Hub Cap Socket 111mm, 51017

Features: Oval shape socket with two flats on the side to suit BPW rear axle hub retaining cap nuts found on later model Japanese commercial trucks, tractors and automotive equipment.
Applications: BPW 12 tons.
Use with 41mm spanner or socket.
Size: 111mm (Oval) across the flats.

Made in China

Scania Rear Axle Nut Socket 100mm, 51016

Features:
Used to remove and install the rear axle nut on Scania trucks.
Size: 3/4" Drive x 100mm (8-point)

Made in China

Earless-Type CV Boot Hose Clamp Pliers, 50696

Made of carbon steel, reliable and extremely stable.
Light weight, easy to use.
Compression joint with central pushing function.
Designed for torsion wrench, comfortable grip.
Material: Carbon steel
Length: 21.7cm
Weight: 344g
Application: Suitable for all earless type CV boot clamps.

Made in China

Ford, Volvo - Trailing Arm Bush Tool, 50968

Designed for the removal and installation of the rear trailing arm mounting bushes on Ford vehicles.
Also suitable for some Volvo vehicles that share the same Ford platform.
The bush can be replaced without removing the trailing arm from the vehicle.
Applications:
Ford: Mondeo MK4 (2007-), S-Max ( 2006-), Galaxy (2006-)
Volvo: S60, S80, XC60, V70, XC70 (2006-)

Made in China

Mercedes-Benz Ball Joint Socket 43mm, 51043

For quick, easy and professional loosening and tightening of the supporting joint flat nut.
The design of the socket wrench allows the supporting joint pin to be held in place when the nut is loosened or tightened, and it allows the use of a 1/2" screwdriver. The socket wrench specially adapted to the nut engages frictionally in the nut profile.
Slipping is impossible and the high tightening torque (up to 250 Nm) can be applied and transmitted precisely.
Technical data
Drive 1/2" or 30mm Combinationa wrench
Size: 43 mm
Mercedes-Benz Application:
W 167: GLE and GLS front and rear axle
W 205: C-Class 4Matic and AMG models (sedan, T-model, coupe and convertible) front axle
W 213: E-Class 4Matic and AMG models (sedan, model T) front axle
W 238: E-Class 4Matic and AMG models (coupé, cabriolet) front axle
W 253: GLC AMG and GLC Coupé front axle
W 257: CLS 50 AMG Coupé front axle

Made in China

19 Pcs Air Hammer Kit, 93988

Track Rod Hammer
5mm Hammer
1/2" Dr. Adaptor Hammer                                                                            
63mm Large Concave Hammer
38mm Medium Flat Hammer
74mm Large Flat Hammer                                    
Air Hammer                                                       
impact ball joint separator, 7"X 24mm, 7" X 20mm
Point Chisel                                                      
20mm Flat Chisel                                                    
38.5mm Diameter Body                         ·
Smoother Hammer              
Impact exhaust slitting chisel ( bend )                                    
Pneumatic Plug insertion needle φ4mmX152mmL      
29mm Polyoxymethylene(POM) Hammer
29mm Copper Hammer                                         
29mm Aluminum Hammer                                      
29mm Track Rod Hammer

4 pc Strut nut socket set, BR904T1

1. 10.5 mm - VW GOLF
2. 12.5 mm - VW POLO
3. 14.5 mm - POLO, GOLF, PASSAT, AUDI 80
4. 14.5 mm - AUSTIN MAESTRO

Made in Taiwan

Strut Nut Socket - for Mercedes-Benz S Class, BR9T1401
A specialist socket for suspension strut nut removal. This socket is specifically for Mercedes-Benz S Class.
Applications: Mercedes-Benz S Class W220 (2000 - 2006).
16mm Hex drive.
Length: 30mm
Pin size: 3mm
To be used with an appropriate Hex key to hold strut in place whilst tightening.
Material: steel

Made in Taiwan

17 pcs Master Front Wheel Drive Bearing Service Kit, 50405

Comprehensive set for the removal and installation of front hub bearings
Without the need to dismantle the steering assembly.
Heavy Duty Steel Drifts
Hub Screws - M12 x 1.5 and M14 x 1.5mm
Drift sizes - 55.5.59.62.65.66.71.5.73.78.84.86.91mm
Suitable for most front wheel drive cars and vans.

Made in China

7 PCS Drive Shaft Puller Extractor Set, 50046

Use for drive shaft on BMW, VW, Mercedes, SUBARU
230mm Long Puller With 120mm Housing
Include adapters:
M16 x 1.5 for Subaru;
M20 x 1.5 for Volkswagen Beetle, Touareg & Porsche Cayenne.
M22 x 1.5 for BMW E30.
M24 x 1.5 for BMW E36 & Mercedes-Benz W203.
M27 x 1.5 for BMW E32, E34, E38, E39, X5.
M30 x 1.5 for BMW E32, E36, E34

Made in China

21 PCS Master Adaptor Set Ball Joint Service Kit, 50042

With 4 Wheel Drive Adaptors
Brake Anchor Pin Removal and Installation
This tool kit is designed for use on all cars and
Light trucks that have press-fit type ball joints
Without the need to remove the control arm from the vehicle
Contents:
C-Frame and Forcing Screw
Installation Adaptor
Removal Adaptor
Installation Cups
Removal Cups
Receiving Tubes
For servicing universal joints on most cars / vans and light trucks
Description:
Includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles. Comes with blow molded carrying case, making it easier to keep the tools organized and easy to transport.
Features:
Solid carbon-steel construction with anti-rust coating for ultimate endurance through years of heavy use.
Designed to easily remove and replace press-fit upper and lower ball joints with receiver tubes and adapters for most full-size GM, Ford, and Dodge vehicles.
Includes all receiver tubes and removing/installing adapters for press-fit upper and lower ball joint service.
The forged C-frame press makes it easier to remove and replace universal joints when stacking with numerous cups and receivers.
The tool case with pre-sized slots for each component keeps your tools securely organized and extends their service life.

Made in China

SCANIA - 80mm 8-pt. Front Hub Nut Socket, TP9T1422
Description:
This eight sided 80mm socket is designed for the removal of front hub nut found on Scania trucks.
Lenght: 104 mm
Innerdiameter: 80 mm
Outerdiameter: 100 mm
Driven by 41mm Hex
Weight: 1800 gr

Made in Taiwan

Mercedes Benz Ball Joint Remover Installer Set, 50453

Spesialized 10-Piece tool kit to service all of the pressed-in ball joints incorporated in the Mercedes W210 / W211 / W220 / W230 / W163/ W164 suspensions.
This tool set allows servicing (installation and removal) of the specified ball joints on the vehicle. This saves tremendous time and effort by avoiding the necessity of disassembling the brake system and other suspension components that would disturb suspension alignment.
Includes:
C-Clamp press tool forged (not cast) form SCM440 Steel (HRC 38-42 hardness)
Front Suspension Ball Joint press fixtures for W220 / W211 / W230 Chassis - used in Conjunction with the C-Clamp Press.
Front Sway Bar Ball Joint (pressed into control arm) press fixtures for W220 /
W211 - used in Conjunction with the C-Clamp Press.
Front & Rear Suspension Ball Joint press fixtures for W163 / W164 Chassis - used in Conjunction with the C-Clamp Press.
Ball joint socket (4-prong) for servicing front ball joint on W163 / W164 Chassis
Application: Mercedes Benz
W210 Chassis - 1995-2002 E Class
W211 Chassis - 2002-2009 E Class
W220 Chassis
W230 Chassis
W163 Chassis - 1998-2005 M Class
W164 Chassis - 2006-present M Class

Made in China