UNDER CAR TOOLS

CV Joint Assembly Removal Tool, 50044

Description:
- For removing CV joints on front wheel drive cars without removing the drive shaft
- Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip
- A robust tool for front wheel drive cars
- Suitable for most vehicle
- Removes CV joints without removing drive shaft
- Time saver
- Essential service tool
- Phosphate Coated for long heavy duty service life

CV Joint clamp banding tool, 50690
Use to install and tighten the "band-it" or strap style clamps on CV joint boots or on power steering rack and pinion steering gear boots.
Once installed into the tool tighten the band by turning the handle on the tool;
Use a socket or wrench on the handle to torque the band to OE specifications.
When the boot clamp has been tightened to specs cut the band to the correct length by flipping the lever (at the front of the tool) forward.
Features:
CV joint boot clamp wrench securely fastens band-it style free-end clamps
Roll band clips and pre-formed CV boot clamps
Use by turning the winding mandrel with a 1/2-inch socket or wrench
Measures 11-1/2 inches long
Works on All CV Boot Clamps, ATV,  UTV and some automotive applications.

This professional-grade strut spring compressor set (370 mm, 50078B) is designed for both commercial garages and home mechanics. Ideal for passenger cars and light commercial vehicles, this high-quality set is perfect for compressing springs in tight spaces. Each set includes one pair of compressors.

• Extra Long Reach: Compresses up to 370mm.
• Twin Hook Design: Provides enhanced stability during use.
• Versatile Drive: Compatible with 1/2" square drive or 21mm spanner.

Important: It is not recommended to use an impact wrench with this tool. Made in China.

Universal Strut Coil Clamp Spring Compressor Tool Set, 50074
The spring tensioner is very suitable for mounting and dismounting of the McPherson springs at the front and rear axles of many vehicle types:
BMW, Toyota, Ford, Opel, VW, Audi, Saab, Nissan, Honda, Subaru, Volvo, Mitsubishi etc.
Contents:
1 x Heavy Duty Compressor(5.2kg)
2 x 65-125mm Jaws (Use rang: 80-115mm)
2 x 88-160mm Jaws (Use rang: 110-150mm)
2 x 127-214mm Jaws (Use rang: 140-195mm)
Adjustment Block

The set is in blue case.

Ball Joint assembly and disassembly tool for Mercedes

Specifically designed for Mercedes-Benz (W220, W211, W230).
This tool removes and installs the lower ball joints whilst insitu without removing parts, saving time and money.
High quality forged C clamp is manufactured from CR-MO.
Tools are labelled for extraction and installation. Heavy duty type.
Contents:
- 160 mm compression spindle with 24 mm hex drive
- 2 compression heads 40 mm and 54 mm
- 3 pressure pads 22 mm, 33 mm and 57 mm

4-In-1 Master Ball Joint Remover/Installer Kit Ideal For 4wd Ball Joint Service/Repair Heavy Duty Tools Suitable for Home or Business Applications

Ideal For 4wd Ball Joint Service/Repair
Heavy Duty Tools
Suitable for Home or Business Applications
Contents:
1 "C" Frame Press
1 "C" Frame Screw
3 Receiving Tubes Sizes:
2-3/4" X 3"
2-1/4" X 2-1/2"
1-3/4" X 2"

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Installer And Remover Adapters For 1967 Thru Current 1/2 And 3/4 Ton 4WD Vehicles With DANA 44 Front Axle Found In FORD, GM, DODGE, IHC & JEEP vehicles
Excellent For Removal And Installation Of Press-Fit Parts Such As Ball Joints
Universal Joints And Truck Brake Anchor Pins
It Will Also Remove Rusted And Corroded Parts.

Front axle upper ball joint extractor installer VW T4, 50463

Suitable for removing and installing the upper front ball joint in situation without the need to disassemble.
Features a variety of adaptors used in different combinations for extracting and installing.

Applicable: VW; T4 2000 CC, T4 2500 CC

Made in China