AUTOMOTIVE SPECIALTY TOOLS

VAG 1.4L; 1.6L; 2.0L TDI High Pressure Pump Pulley Remover tool, 50299

Used to removal of hub of high pressure pumpu on VAG 1.4L, 1.6L, 2.0L TDI engine.
Suitable for 1.4L, 1.6L, 2.0L TDI engine:
VW : Golf 2013~
Audi : A3 2013~
Skoda : Rapid 2012~, Octavia 2013~, Fabia 2014~, Superb 2015~, Kodiaq 2016~
Seat : Alhambra 2011~, Ibiza 2008~, Leon 2013~, Ateca
OEM# T10489

Made in China

Citroen/Peugeot/Fiat/Ford - Belt Tension Wrench, 50516

Facilitates the pre-tensioning and locking of V-ribbed belt tensioners.

For the removal / installation of the V-ribbed belt in - situ on the vehicle even in very limited space condition.

Suitable for Citroën / Peugeot / Fiat / Ford 1.4L and 1.6L diesel engines.

Applications include: Citroën, Peugeot, Ford & Fiat 1.4 & 1.6 diesel engines.

Citroën: Berlingo, C1, C2, C3, C3 Picasso, C3 Pluriel, C4, C4 Picasso, C5, DS3, DS4, Xsara & Xsara Picasso.

Peugeot: Partner III, 206, 207, 308, 508, 3008, 5008.

Engines covered include DV4 & DV6 engines.

Engines: 1.4-1.6D

OEM No.: 0188-Z , G.0194-E3

Made in China

BMW N47; N57 Crankshaft Pulley Holder, 50531

Used for dismantling and replacing the damper disc on BMW N47; N57.
For fixing  the crankshaft pulley when loosening or tightening the center pulley bolt.
OEM No. 117220

Made in China

5 Pcs 1/2" Drive Mercedes Specialized Socket Set, 50459

Applicable:
For servicing gearboxes, differential, front axle bearing, rear axle flange on most Mercedes-Benz vehicles.
Material: Cr-V
Contents:
(A): 8 mm tooth x 70 mmL - For Mercedes gearbox flange.
(B): 6 mm tooth x 70 mmL - For Mercedes differential flange.
(C): 6 mm tooth x 70 mmL - For front axle wheel bearing of Mercedes G-Class (W460 / W461 / W463)
(D): 6 mm tooth x 70 mmL - For Mercedes W107, W114, W115, W116.
(E): 8 mm tooth x 80 mmL - For rear axle of the drive shaft flange of Mercedes W116, W123, W126.

Made in China

Engine Timing Tool Kit Vauxhall/Opel, Saab, Chevrolet 2.0; 2.4 – diesel engines, 50210

This kit contains all the engine synchronization tools for OPEL / Vauxhall, SAAB, Chevrolet 2.0; 2.4.
Applicable to the following car models:
GM / Vauxhall / Opel: Astra, Insignia, Antara Turbo
Chevrolet: Captiva, HHR, Malibu
Saab: 9-5
Engines:
2.0L: LHU (A20NFT) / LTG (A20NHT) / LDK (A20NHT)
2.4L: A24XE / A24XF / LE5 / LE9
OEM No.: EN-48585 / EN-43653 / J43653 / EN-955-10 / KM 955 / EN-955-20 / KM 955-20 / EN-45027-1 / J-45027-1 / J-45027-2 / EN45027-2 / EN-45027 / EN-49212 / EN-49212-1 / EN-49212 / EN-49212-2 I / EN-48953
Contents:
Crankshaft pulley alignment tool - OEM EN-48585
Flywheel holding tool - OEM EN-43653, J43653
Tensioner retaining pin 2.5 mm - OEM EN-955-10, KM 955
Tensioner locating pin 4.0 mm - OEM EN-955-20, KM 955-20
Tension plunger resetting tool - OEM EN-45027-1, J-45027-1
Tension plunger holder - OEM J45027-2, EN45027-2, EN-45027
Camshaft locking tool (left side) - OEM EN-49212, EN-49212-1
Camshaft locking tool (right side) - OEM EN-49212, EN-49212-2
Camshaft adjuster holding tool - OEM EN-48953

Made in China

Petrol twin cam locking/setting tool set FIAT 1.6 16V, 50692A
Contents:
TDC Position tool – OEM No. 1 895 443 000
Tensioner adjuster – OEM No. 1 860 876 000
Camshaft Setting Plate ( Inlet and Exhaust ) - OEM No. 1 860 874 000

Applicable:
Fiat 1.6 16v twin cam petrol engine (95-) in:

Fiat: Brava, Bravo, Marea, Marea Weekend, Multipla, Palio, Stilo

Engine code:

178B3.000, 182A4.00, 182A6.000 & 182B6.000

Made in China

Petrol Engine Timing Kit-RENAULT 1.4,1.6,1.8,2.0 16V-Belt Drive
Suitable for timing belt replacement on petrol 1.4, 1.6, 1.8 and 2.0 engines fitted to Renault vehicles. Some 1.8 and 2.0 engines may require associated tool to loosen the camshaft sprocket bolts.
Suitable for timing belt replacement on petrol 1.4, 1.6, 1.8 and 2.0 engines fitted to Renault vehicles.
Some 1.8 and 2.0 engines may require associated tool to loosen the camshaft sprocket bolts.
Renault Clio II (99-06) 
Renault Clio III/Sport (05-12)
Renault Espace/Grand Espace (98-02)
Renault Espace/Grand Espace IV (02-10)
Renault Kangoo/Trekka (01-09)
Renault Laguna (98-01)
Renault Laguna II (01-07)
Renault Laguna III (07-10)
Renault Megane (99-03)
Renault Megane II (02-10)
Renault Megane III/Sport (08-12)
Renault Megane/Scenic (99-00)
Renault Scenic/RX4 (99-03)
Renault Scenic/Grand Scenic II (03-09)
Renault Trafic II (01-11)
Nissan Kubistar X76 (03-09)
Nissan Primaster X83 (02-11)
Vauxhall/Opel Vivaro (01-11) 
Applications:
Renault : Avantime (00-03), Clio II (99-06), Clio III/Sport (06-09), Espace/Grand Espace (98-02), Espace/Grand Espace IV (02-10), Kangoo/Trekka (01-09), Laguna (98-01), Laguna II (01-07), Laguna III (07-13), Megane (99-03), Megane II (02-10), Megane III/Sport (08-13), Megane/Scenic (99-00), Scenic/RX4 (99-03), Scenic/Grand Scenic II (03-09), Trafic II (01-11), Twingo II (08-14), Vel Satis (00-10), Wind (10-14).
Nissan : Kubistar X76 (03-09), Primastar (02-11).
Vauxhall/Opel : Vivaro (01-11).

Engine Code:
K4J 1.4 16v - Renault 730, 732, 740
K4M 1.6 16v - Renault 708, 730, 732, 750, 752, 753, 760, 761, 764, 812, 813, 848
K4M 1.6 16v - Nissan 752, 753
F4P 1.8 16v - Renault 720, 722, 760, 770, 771, 772,773, 774, 775
F4R(t) 2.0 16v - Renault 700, 701, 712, 713, 714, 715, 720, 722, 730, 732, 740, 741, 744, 746, 764, 765, 770, 771, 774, 776, 780, 784, 786, 787, 790, 791, 792, 794, 795, 796, 797, 800, 810, 811, 820, 830, 870, 874
F4R(t) 2.0 16v - Nissan 720, 722, 820
F4R(t) 2.0 16v - Vauxhall/Opel 720, 722, 820

Made in China.

Diesel Engine Timing Crank Locking Tools-VW-AUDI, 50365

Diesel Engine Timing Crank Locking Tools-VW-AUDI, 50365
VW - Lupo | Fox | Polo | Golf | Golf Plus | Bora | Jetta | Beetle |
Scirocco |Passat | Sharan | Touran | Tiguan | Caddy | Transporter / 98-11
Audi - A2 | A3 | A4 | A5 | A6 | Q5 / 98-11
Ford - Galaxy / 00-06
Seat - Ibiza | Altea | Leon | Alhambra | Toledo | Arosa | Cordoba / 99-11
Skoda - Fabia | Roomster | Octavia | Superb / 00-11
Diesel Engines - 1.2 |1.4 |1.9 | 2.0 TDI PD V6
1.6 | 2.0 TDi Common Rail ...

VAG V6 & V8 CR TDI High Pressure Pump Sprocket Locking Tool, 50297

For locking the high pressure pump sprocket when replacing the timing tooth belt
Suitable for 2.7L;  3.0L; 4.0L; 4.2L TDI engines
V6 TDI common rail:
Engine codes: CANA, CANB, CANC, CAND, CDYA, CDYB, CDYC, CASA, CASB, CAMA, CAMB, CCWA, CCWB, CGKA, CGKB, CCLA, CARA, CEXA, CASA, CASB, CASC, CATA, CCMA
V8 TDI common rail:
Engine codes: CCFA, CCFC, CDSB, CTEC
OEM No. T40135
Weight: 120 g

Made in China

Land Rover, Ford DOHC 2.2 Diesel - Balance Shaft Timing Tool Set, 50422

Special set of tools for checking, holding and locking the balancing shafts, DOHC 2.2 diesel engines with belt drive of Ford and Land Rover.

Engine codes:

Ford Q4BA and Q4WA 2.2 diesel in Galaxy, SMAX and Mondeo 2008-2015.

JLR & PSA DW12 in Freelander II (2006 - 2015)

Range Rover Evoque (2011 - 2015).

Application:

Ford: Galaxy, S-MAX, Mondeo

Engine: 2.2 TDCi

Engine codes: KNWA, Q4BA, KNBA, KNBB

Land Rover: Freelander, Range Rover Evoque, Discovery Sport

Engine: 2.2TD4, 2.2SD4, 2.2eD4

Engine codes: DW12CTED / 22DT, DW12CTED4, 224DT

OEM №: 303-1328 / 0190D; 303-1329; 303-1330

Made in China

BMW S54 Engine Camshaft Timing Tool Set, 50526

Description:
OEM 11 9 140 - Valve timing checking tool
OEM 11 9 130 - Camshaft Setting Tool
OEM 11 7 342 - Camshaft setting tool pins
OEM 11 7 160 - VANOS alignment lever
OEM 11 2 300 - Crankshaft Locking Pin
OEM 11 9 170 - VANOS Spacers
Application:
BMW M3 Cabriolet 2000-2006, M3 Sports Coupe 1999-2006, M3 CSL Sports Coupe 2003-2004
Plus Z3 (M) E36 2000 onwards, Z4 (M) E85/E86 2006 onwards

Made in China

Mercedes Engine timing chain riveting tool set, 50684A

Essential tool for timing chain work on Mercedes Benz 1.7D, 2.1D, 2.2D, 2.7D, 3.0D, 3.2D, 3.9D and 4.0D CDi diesel engines.

May also be used on some Chrysler / Jeep 2.2D, 2.7D and 3.0D CRD diesel engines.

For Timing Chain on Mercedes Petrol and Diesel engines.

OEM No.:
112 589 09 63 00
602 589 00 39 00
602 589 02 33 00
602 589 02 40 00
602 589 05 63 00
602 589 05 63 01

Made in China

Engine timing tool kit - OPEL/Vauxhall 2.0 CDTI, 50171

Designed for: To removal and replace the Opel / Vauxhall 2.0 CDTi camshaft drive belt. The kit also includes flywheel locking tools for vehicles equipped with an automatic transmission.
Applicable: Opel / Vauxhall 2.0 CDTi - LFS / B20DTH, LFS / B20DTR (2.0 CDTi от 2014 г.).
Models: Antara (от 2016 г.), Cascada (от 2015 г.), Insignia-A / Country Tourer (2014-2017), Insignia-B / Country Tourer (от 2017 г.) и Zafira-C Tourer (от 2014 г.); CDTi EcoFLEX Blueinjection
OEM tool No.: EN 51413, EN 955-2, EN 51412, EN 51414, EN 51411

Made in China

Engine timing tool set for RENAULT SCENIC LAGUNA CLIO 1.4/1.6 16V, 50094

Features: For the orrect synchronization of the Renault K4J, K4M and F4P, F4R when changing the belt.
Application: Clio, Laguna, Megane 1.4 / 1.6 16v
  The set includes:
- 8 mm TDC timing pin- OEM No .: MOT 1054, MOT 861, MOT 863
- Crankshaft Locking Pin - OEM No .: MOT 1489
- Camshaft setting tool - OEM No .: MOT 1496
- Camshaft pulley alignment tool - OEM No .: MOT 1490
Applications:
Clio 1.4, 1.6 16V (98-06).
Megane 1.4, 1.6 16V (98-06).
Clio Sport 2.0 16V (98-06).
Megane 1.8, 2.0 16V (98-04).
Espace 2.0 16V (98-04).
Megane II 1.4 16V (02-09).
Grand Scenic II 1.4/1.6 16V (02-09).
Megane II 1.6 16V (02-05).
Laguna 1.6 16V (98-06).
Megane II 2.0 16V (02-09).
Laguna 1.8 16V (01-05).
Scenic 1.4, 1.6 16V (98-06).
Laguna 1.8, 2.0 16V (98-04).
Scenic 1.8, 2.0 16V (98-04).
Laguna II 2.0 16V T (02-09).
Scenic II 1.4, 1.6, 2.0 16V (02-09).

Engine Timing tool set for Fiat, Alfa Romeo, Lancia, 50318

Applicable: For petrol and diesel engines.

OEM Tools:
1 860 847 000; 1 860 875 000; 1 870 697 000; 1 860 895 000; 1 895 879 000; 1 860 898 000; 1 860 992 000
1 860 992 000; 1 863 000 (8mm); 1 860 771 000; 1 860 161 000, 1 860 874 00; 1 860 874 0001 860 876 000
1 860 845 000 ; 1 860 876 000; 1 860 965 000; 1 860 901 000; 1 860 905 010; 1 860 987 000; 1 860 985 000