AUTOMOTIVE SPECIALTY TOOLS

VAG Cam Chain Tensioner Locking Tool, 058-62237
Compresses the camshaft chain tensioner safely and easily when removing camshafts or replacing the tensioner or its gasket. These tasks are virtually impossible without the correct tool.
The tool threads into the guide, compressing the tensioner, relieving chain tension.
The no-mar plastic contact surface will not harm the tensioner face.
Applicable:
Audi: A4, A6, A8, TT, S4, S6, RS6
Seat: Ibiza, Cordoba, Leon, Toledo, Alhambra
Skoda: Octavia
Volkswagen: Polo, Golf, Jetta, Passat, Beetle, Touareg
Engine Codes: ADR, AEB, AFY, AGN, AGU, AHA, AJE, AJH, AJL, AJP, AJQ, AMB, AMK, AMU, ANB, APB, APG, APH, APP, APT, APU, APX, ARH, ARK, ARX, ARY, ARZ, ATC, ATQ, AUM, AUQ, AVC, AWC, AWM, AWN, AWP, AWT, AWV, AYP, BAM, BBD, BCY, BEA, BEL, BFM, BKF, BNU
OEM №: 3366

Made in Taiwan

Timing Tool set for Petrol Citroen C3 Peugeot 208, 308, 2008 SUV, Psa 1.0 1.2 Vti, 780-8331

To check and adjust the camshaft and crankshaft in the correct TDC position.
Applicable: Peugeot 208 (2008); 2012 Citroen C3
Engine code: 1.0, 1.2 VTi petrol engine: EBO (ZMZ), EB2 (HMZ)
OEM number: 0109-2A, 0109-2B

Made in Taiwan

VAG 2.7/3.0 TDI V6 & 4.0/4.2 TDI V8 - Diesel engine setting/locking & HP Pump removal/instalation set, 914G5

Specifically designed for servicing Volkswagen/Audi 2.7 & 3.0 V6, common rail, chain driven diesel engines.
The kit includes special adaptors for turning and positioning the crankshaft, crankshaft alignment pins with flats and side pins to assist in alignment of the crankshaft with the cylinder head.

Content:

• Crankshaft Locking Pin
• Injection Pump/Balancer Shaft Locking
• Crankshaft Turning Tool Type 1
• Crankshaft Turning Tool Type 2
• Camshaft Locking Pin (2pc)
• Camshaft Alignment/Locking Tool
• Camshaft Sprocket Holding Tool
• Tensioning Locking Pin 3.3mm (2pc)

(OEM: T40062, T40041, T40049, 3359, T40058, T40060, 3342)
 

Models:

• AUDI A4 2.7TDI (2001-2008) with Engine Code BPP
• AUDI A4 2.7TDI (2001-2008) with Engine Code BSG
• AUDI A4/A6/A8 3.0TDI (since 2005) with Engine Code ASB
• AUDI A4 3.0TDI (2001-2008) with Engine Code BKN
• AUDI A4/A5 3.0TDI (since 2007) with Engine Code CAPA
• AUDI A6/ALLROADER 2.7TDI (since 2005) with Engine Codes BPP/BSG
• AUDI A6 ALLROADER/A8 3.0TDI (since 2003) with Engine Codes BNG/BMK
• AUDI A6/Q7 3.0TDI (since 2005) with Engine Codes BMZ/BUG/BUN
• AUDI A8 4.0TDi (2003-2010) with Engine Code ASE
• VOLKSWAGEN PHAETON 3.0TDI/PD (since 2004) with Engine Codes BMK/CARA
• VOLKSWAGEN TOUAREG 3.0TDI (since 2005) with Engine Codes BKS/BUN/CASA/B

Codе: 520133

International shipment available. Please ask for price.

Camshaft setting bar & TDC timing pins FORD/Mazda, 9G1211

• Camshaft setting and locking plate.
• Updated set now covers Zetec engines found in FOCUS, MONDEO and COUGAR from 98 on. Also covers FORD 1.6; 1.8 and twin cam 16V petrol engines
• Crankshaft TDC location for FORD 1.25 and 1.4 engines plus the puma 1.7 engine.
• TDC pin also suitable for MAZDA 121 1.25LTR petrol engines.
• Supplied with warning tags.

Crankshaft pulley holding tool BMW 3/5 Series, 846-8083А

Features:
Holds vibration damper when loosening or tightening centre crankshaft bolt.
Applicable: BMW 3 series E46 (1998 - 2007), 5 series E39 (1996 - 2003)
BMW E81 120d 163PS
BMW E46 318d 116PS - 318td 115PS - 318dt 115PS - 318d, 115PS - 320d 136PS - 320td 150PS - 320d 150PS
BMW E90 318d 150PS - 320d 150PS - 320d 163PS
BMW E91 318d 122PS - 320d 150PS - 320d 163PS
BMW E39 520d 136PS
BMW E60 520d 163PS - 520d 150PS
BMW E61 520d 150PS - 520d 163PS
BMW X3 E83 2.0d 150PS
OEM No. 11 6 310 (11 6 311 holder, 11 6 312 centring tube)
Centering tube OD: 60mm, ID: 49mm

Made in Taiwan

Engine timing kit - VAUXHALL/OPEL 1.6 CDI, 011262505

A comprehensive kit to lock the 1.6 diesel engine into its timed position for the removal and replacement of the timing chain to the models listed.
Included in this kit is the added component of the camshaft sprocket support bracket that is required when removing the camshaft for essential work on the Cam followers
Applications: Astra-J, Meriva-B, Mokka, Zafira-C, Tourer 2013 onwards (CDTi, EcoFlex CDTi)
Engine codes; LVL/B16DTH, LVM/B16DTL, LVL/B16DTN, LVM/B16DTC, LWQ/B16DTE, LVL/B16DTJ

Made in Taiwan

Engine timing tool set - Reanult 2.2/2.5 dCi

Purpose:
For adjusting the camshaft of Renault Esapce2.2 DCI-Master 2.2 / 2.5DCI
Application:
- Renault: Laguna II, Espace, Master, Trafic, diesel engines 2.2 / 2.5 DCi
- Opel: Vivaro, Movano, diesel engines: 2.2 / 2.5 DTi, Astra B, Vectra B, Signum, Zafira, petrol engines 2.2 16V
Origin: Taiwan
 

VAG 1.2/1.6 TDi и 2.0L TDI engines - Diesel injector remover, 011108019A

Applicable:
Volkswagen Golf 2009, Seat Ibiza 2008, Altera 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013.
Engines: 1.2L TDi CR 55Kw Diesel, 1.6L CRTD Diesel and 2.0LTDI Diesel.
OEM tools: T10402, T10415, T10055.
Use according to OEM instructions.
No solenoid removal is required.

Made in Taiwan

OPEL 1.8; 2.0L - Camshaft locking tool, 9G1201
Features:
Special locking tool for 1.8 / 2.0 16V EcoTec motors on:
Astra G / H | Frontera A | B | Omega B | Vectra A | B
VX220i Speedster | Zafi ra A / B. 2.0 | 2.2 16V gasoline engine
Engine code:
C20SEL | X20XEV | Z20LEH | LEL | LER | ATTENTION X22SE XE
Y22SE | XE | Z22XE (1996 - 2010)
OEM No. 853 KM

Produced by Force, Taiwan

VW, AUDI Head bolt socket, 846-7107

Features:
- 125 mm Overal length for restricted areas
- S2 10 mm Polydrive 6-pt. bits (RIBE 10 mm)
- 1/2"Dr. Cr-V Socket
- Not for impact use.

Applicable: Fits 1998 and later VW/Audi 5 Valve engines (V-6 and 4 cylinder)

Made in Taiwan

Engine timing tool kit - VAG VW AUDI 1.4 1.6 2.0i TDi CR 2012 ON, 780-8364

An 8 piece kit consisting of the components required to lock the crankshaft. Cam pulleyand fuel pump pulley in their timed positions to allow the removal and replacement of the camshaft timing belt
Contents:
A. 2.5mmTensioner Locking Tool, OEMT10265

B.Auxiliary Drive Tensioner Pin, OEMT10060A

C.Cam Shaft Pulley Timing Pin, OEM 3359

D.Fuel Pump Holding Tool, OEMT10051

E.Crankshaft Timing Tool, OEMT10490

F. 6mm Ball Hex Key, OEMT10264
G.Pin for E
Application: Post 2012 1.6 & 2.0 TDI Common Rail Diesel engines found in the Audi, Seat, Skoda and Volkswagen:
VW: Golf SV/Sportsvan, Golf VII, Golf VII Estate, Golf VII Wagon, Polo
SEAT: Leon, Leon ST
AUDI: A3 Cabrio, A3 Saloon, A3 Sedan, A3/A3 Sportback, A4, A4 allroad, A4 quattro,A5 Coupe/Cabriolet, A5 Sportback, A6, Q5,TT
SKODA: Octavia III
Engine: 1.4TDI CR, 1.6TDI CR, 1.6TDI CR GreenLine, 1.6TDI CR BlueMotion, 1.6TDI CR Ecomotive, 2.0TDI CR, 2.0 RS TDI CR, 2.0TDI CR Ultra
Engine code: CKFB, CKFC, CLHA, CLHB, CNHA, CNHC, CRBC, CRBD, CRFA, CRFC, CRKA, CRKB, CRLB, CRLC, CRMB, CRVA, CRVC, CSUA, CSUB, CUNA, CUPA, CUTA

Made in Taiwan

FORD flywheel locking tool, 903G11

VW, AUDI Camshaft locking tool (4.2), 058-625000

Features: For engine synchronizationVW/Audi engines 2.5L I5 (BGP, BGQ, BPR, BPS, CBTA & CBUA),

3.2l [V6](4v)(BKH),4.2L[V8](4V)(BAR,BNS,BVJ, BYH & CAUA) & 5.2L (V10)(4v)(BXA & BSM).

Applicable: (20005-2008),A4 Avand (2005-2008),A4 Cabriolet(2007-2009),A6(2005-2009),A6 Avant (2006),A8(2007-2009),A8 L (2007-2009),Q7(2007-2009),R8(2008-2009), RS4(2007-2008),S5(2008-2009),S6(2007-2009)& S8(2007-2009) VW JETTA (2005-2012),

JETTA SPORTSWAGEN (2008-2009), BEETLE (2006-2010), BEETLE CONV. (2006-2010),

RABBIT(2006-2009) & TOUAREG (2007-2009)
No.to OEM #T40070

Made in Taiwan

Engine Timing chain tool set - Vauxhall/Opel 1.0/1.4 Petrol, 011208962

Timing kit Vauxhall/Opel 1.0/1.4 for locking both camshafts in a timed position while the timing chain is being replaced
Application: Vauxhall/Opel Adam Astra-K, Corsa-E Turbo SIDI, EcoFlex, Turbo
Engine codes:
1.0lt:LE1/B10XFL, LE1/B10XFF, LE1/B10XHL, LE1/B10XFT
1.4LT: LV7/B14XE, LE2/B14XFL, LE2/B14XFT
OEM: EN-51367, EN-51298, EN-51632
Year 2014-2017

Made in Taiwan

Camshaft Alignment Timing Tool VW, Audi V6 90, 100, A4, A6 (94-97)
Set includes:
- One camshaft alignment fixture that interfaces with the cam gears and is utilized for the critical task of securing and maintaining TDC timing alignment when the cam belt is serviced or removed for other front-engine or cylinder head service tasks.
- One clamp for securing the camshaft alignment fixture

NOTE: This tool set is only applicable to V6 2-valve engines installed in Audi platforms from 1991-1997. It is not applicable to any 5-valve engines.
Material: Cadmium and black-oxide plated steel
Application Make: Audi
Application Detail: Audi AFC engines - Audi 90, 100, A4, A6 1994-97

Produced by Force, Taiwan