AUTOMOTIVE SPECIALTY TOOLS

VW / Audi - Water-Pump Pulley Reaction Wrench, 50672

Features: For locking water-pump pulley, loosening of stubborn screws on the water-pump pulley.
Overal lenght: 300 mm
Applicable: VW, Audi

Made in China

Diesel/Petrol Engine flywheel holding tool -  BMW/BMW Mini – Chain drive, 50657

Basic tool for fixing the flywheel when releasing and tightening the vibration damper central bolts on BMW M47T2, M57T2, M57TU, M67, N20, N26, N43, N45, N45, N46, N47, N51, N52, N53, N54 W17 Diesel and Petrol chain drive engines.
It can also be used to fix the flywheel when dismantling the timing chain for cylinder head work.
Applicable:
BMW 1 Series: (F20/21) (12-15), 116i (04-12), 118i (04-14), 120i (04-14), 130i (05-07), 135i (07-11), 116d (08-12), 118d (04-14), 120d (04-14), 123d (07-14), M Coupe (11-12)
BMW 3 Series: (F30/31) (12-15), 316ti (04-14), 316i (04-11), 316d (09-12), 318i (04-07), 318ti/Compact (04-04), 318d (03-12), 318td (03-07), 320d (01-07), 320d Compact (01-05), 318i (05-13), 320d (07-14), 320i (05-14), 320si(05-06), 323i (05-11), 325i (05-14), 325d (06-10), 330d (05-08), 330i (06-13), 335d (05-13), 335i (05-11)
 BMW 4 Series: 420i F32 (13-15), 428i F32 (13-15), 420i F33 Cabriolet (14-15), 428i F33 Cabriolet (14-15), 420i F36 (14-15), 428i F36 Gran Coupe (14-15)
BMW 5 Series: (F10/11) (10-15), 520d (05-10), 520i (07-10) 523i (03-10), 525d (05-10), 525i (05-10), 525i (07-10), 530d (03-10), 530i (05-10), 535d (04-10)
BMW 6 Series: 630i (04-11), 635d (07-11)
BMW 7 Series: 730d (05-08), 730i (02-08)
BMW X Series: X1 E84 (09-15), X3 E83 (03-14), X5 E53 (03-14), X3 F25 (11-15), X6 E71/72 (08-10)
BMW Z Series: Z4 E85/86 (04-09), Z4 (E89) (11-15)
BMW Mini: Mini (03-06)
Engine codes:
BMW: M47T2, M57T2, M57TU, M67, N20, N26, N43, N45, N45T, N46, N46T, N47, N51, N52, N53, N54
BMW Mini: W17
Инструменти по OEM:
BMW: 11.8.180, 11.8.181, 11.8.182, 11.8.183, 11.8.184, 11.8.185

Petrol Engine setting/locking set – Opel/Vauxhall, Chevrolet 1.0; 1.2, 1.4, 50750

Feature: For checking and setting the camshaft and crankshaft in correct TDC position.
Covers a wide range of Vauxhall/Opel and Chevrolet petrol engines. Includes the necessary tools for setting and locking the camshafts and crankshaft. Also includes the pins for locking the timing chain tensioner.
Contents:
Crankshaft Locking Pin
Camshaft Setting Plate
VVT Sensor Setting Tool (1.0L)
VVT Sensor Setting Tool (1.2 & 1.4L)
Camshaft Sprocket Holding Tool
Chain Tensioner Locking Pin
Belt Tensioner Locking Pin
Applicable:
For Vauxhall / for Opel :
Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ),
Astra-J 1.4 (2009),
Corsa-D 1.0 1.2 1.4 (2009-),Cascada 1.4 (2013-),
Insignia 1.4 (2011-), Meriva-B 1.4 (2010-),
Mokka 1.4 (2012-), Zafira-C Tourer  1.4 (2011-)
For Chevrolet:
Aveo1.2 1.4 (2011-), Cruze 1.4 (2011-), Orlando 1.4 (2012-)
Engine Codes:
1.0/1.0 Ecoflex: A10XEP
1.2/1.2 Ecoflex: A12XEL, A12XER, LWD/A12XEL, L2Q/A12XEL, LDC/A12XER
1.4/1.4 Ecoflex: A14XER, LDD/A14XEL, LDD/A14XER, LUH/A14NEL, LUJ/A14NEL, LUJ/A14NET

Made in : China

VAG 1.8, 2.0 TSi/TFSi – Vibration Damper Holding tool, 50532

Content: OEM T10531/1
- Vibration damper holding tool OEM T10531/3
- Crankshaft sprocket holding tool adapter OEM T10531/2
- Crankshaft sprocket holding tool OEM T10531/4
- Crankshaft sprocket holding tool nut

Applicable:
Audi: A3/A3 Sportback (2007-2017), A3 Cabriolet (2008-2016), A3 Saloon (2013-2016), A4 (2007-2017), A4 Quattro (2008-2017), A4 Allroad (2013-2017), A5 (2015-2017), A5 Sportback (2009-2017), A5 Coupe (2007-2016), A5 Cabriolet (2008-2017), A6 (2012-2017), A6 Quattro (2015-2017), A7 (2014-2017), A8 (2012-2014), S1/S1 Sportback (2014-2017), S3/S3 Sportback(2013-2016), S3 Saloon (2013-2016), S3 Cabriolet (2014-2016), Q3 (2011-2017), Q5 (2009-2017), Q7 (2015-2017), TT (2008-2017)
Seat: Alhambra (2010-2017), Altea (2006-2015), Exeo (2010-2013), Ibiza (2015-2017), Leon (2007-2017), Leon ST (2013-2017), Toledo (2007-2009) Skoda: Octavia II (2007-2013), Octavia III (2013-2017), Superb II (2008-2015), Superb III (2015-2017), Yeti (2009-2015), Yeti Outdoor (2013-2015)
Volkswagen: Amarok (2010-2016), Beetle (2009-2016), CC (2012-2015), Eos (2008-2015), Golf V (2007-2008), Golf VI (2009-2017), Golf VII (2015-2017), Golf Alltrack (2014-2017), Golf VI Estate (2009-2017), Jetta (2008-2015), Passat (2007-2017), Passat CC (2008-2012), Passat Alltrack (2012-2017), Polo (2014-2017), Scirroco (2008-2017), Sharan (2011-2017), Tiguan (2007-2017), Touran (2014-2015), Transporter T5 (2011-2015), Transporter T6 (2015-2017)

Engine Codes:
1.8 TFSI: BZB, BYT, CABA, CABB, CABD, CDHA, CDHB, CJED, CJEE, CJSA
2.0 TFSI: CAWA, CAWB, CBFA, CCTA, CCZA, CCZC, CDAA, CDNC, CDND, CCZB, CCZD, CDAB, CDNB, CESA, CETA, CFKA, CFPA, CGYA, CHHA, CHHB, CJKA, CHHC, CHJA, CJKB, CJSB, CJSC, CJXA, CJXB, CJXC, CJXE, CJXG, CJXH, CNCB, CNCD, CNCE, CPLA, CPSA, CULA, CULB, CULC, CYNB, CYPA, CYRB, CYRC, CWZA, CYBB, CYGA, DAJA, DAJB, DEDA

Made in China

Crankshaft locking tool set - Ford 2.2 TDCi, 50871

Features: To locking and time the crankshaft and flywheel correctly to allow for fitting of the TDC sensor.
Suitable for Ford Transit 2.2 TDCi engines from 2006, including Econetic and HDT engines.
Contents:
Crankshaft Locking Tool                                                         OEM# 303-1587
Flywheel Locking Tool for engines with Common Rail              OEM# 303-698 / 21-251
Timing Pump Locking Pin                                                        OEM# 0188H / 1860965000

OEM No.: 303-1587; 303-698 / 21-251; 0188H / 1860965000

Engine code: CYFA, CYFB, DRFA, DRFB, P8FA, P8FB, PGFA, PGFB, QVFA, QWFA, SRFA, SRFB, SRFC, SRFD, SRFE, UHFA, CYFC, DRFC, USRA

Made in China

BMW N20 N26 Engine timing tool set, 50125

The kit includes a set of tools needed to timing the newer BMW N20, N26 4-cylinder turbo engine.
OEM tools: 212 831, 119 340, 212 830 and 219 548
Content:
Tool for locking the camshaft for N20 / N26
N20 / N26 camshaft fixing base
Aligning pin for N20 / N26
Chain tensioner for N40, N42, N45, N46, N52, N55, N62
Application:
Engine N20 and N26 (4 cylinder turbo engine)
2011-present E84 X1 xDrive/sDrive20i
2011-present F25 X3 xDrive20i
2012-present F30 320i
2013-present F34 320i GT
2012-present F10 520i
2011-present E89 Z4 sDrive20i
2012-present F20 125i
2011-present E89 Z4 sDrive28i
2011-present E84 X1 xDrive/sDrive28i
2012-present F25 X3 xDrive28i
2011-present F30 328i
2012-present F10 528i
2013-present F34 328i GT
Engine Codes: 2.0: N20 B20, N20 B20A, N20 B20O0, N20 B20B / U0, N20 B20B, N26 B20, N26 B20A

VW, AUDI Head bolt socket, 846-7107

Features:
- 125 mm Overal length for restricted areas
- S2 10 mm Polydrive 6-pt. bits (RIBE 10 mm)
- 1/2"Dr. Cr-V Socket
- Not for impact use.

Applicable: Fits 1998 and later VW/Audi 5 Valve engines (V-6 and 4 cylinder)

Made in Taiwan

Petrol Engine Timing Kit-OPEL& VAUXHALL 1.0,1.2,1.4, 50304

This set of kit includes all the locking tools to time the chain on 1.0, 1.2, 1.4 Ecotec Vauxhall / Opel twin cam(chain) engines.
The timing disc position gauge for positioning the timing sensor disc fitted to the inlet camshaft is also included.
Applicable:
Models: Corsa, Agola, Astra,Meriva (97-04)
Engines:1.0 12v., 1.0 16v, 1.4 16v(Chain).
Codes: X10xe, Zi0xe, Z10xep,X12xe, Z12xep, Z14xep.
This set of kit includes all the locking tools to time the chain on 1.0, 1.2, 1.4 Ecotec Vauxhall / Opel twin cam(chain) engines;
The timing disc position gauge for positioning the timing sensor disc fitted to the inlet camshaft is also included.

VAG 1.8/2.0L Balance shaft puller, 50176

For the safe removal of the balance shafts, fitted VAG 4-cylinder chain drive 1.8 and 2.0 injection engines.
Internal thread M8 x 1.25 for sliding hammer.
OEM tool: T10394
Applicable: VW, Audi, Seat, Skoda
VW:
VW Passat (2007-2017); VW Scirocco (2008-2017); VW Sharan (2011-2017); VW Tiguan (2007-2016); VW Beetle (2013-2017); VW CC (2012-2015); VW Eos (2008-2015); VW Polo (2014-2017); VW Touran (2015-2017); VW Golf (2007-2017); VW Jetta (2011-2014)
Audi:
Audi A1 (2015-2017); Audi A3 (2007-2017); Audi A4 (2007-2017); Audi A5 (2007-2017); Audi A6 (2012-2017); Audi A7 (2014-2017); Audi A8 (2012-2014); Audi Q3 (2011-2017); Audi Q5 (2008-2017); Audi TT (2008-2017); Audi Q7 (2015-2017); Audi S1 (2014-2017); Audi S3 (2013-2017)
Seat:
Seat Altea (2006-2015); Seat Exeo (2010-2013); Seat Ibiza (2015-2017); Seat Leon (2007-2017); Seat Toledo (2007-2017)
Skoda:
Skoda Octavia (2007-2017); Skoda Superb (2008-2017); Skoda Yeti (2009-2015)
Engine code:
1.8: BZB, CDAA, BPU, BYT, CABA, CABB, CDHA, CDHB, CABD, DAJB, CJSA, CJSB, CJEB, CJEE, CJED, CYGA, DAJA, CDAB, CJSC, CGYA
2.0: CAWB, CCZA, CBFA, CCTA, CDNB, CDNC, CFKA, CHJA, CCZC, CPSA, CESA, CETA, CNCD, CYRB, CYRC, CNCE, CYNB, CYPA, CYPB, CULB, CULC, CNCB, CWZA, CJXF, CJXC, CJXB, CJXG, CHHC, CCZD, CJKA, CJKB

Made in China

Engine Locking Timing Tool Kit-Ford-Mazda, 50375

Description:

Designed for pulling off the camshaft timing belt wheel and locking or positioning the engine output shafts such as the camshaft and the crankshaft.
Required for changing the timing belt or for engine
Applicable:
FORD 1.8 D/TD/TDCI diesel and 1.25 - 2.0 16V Zetec petrol engine e.g
FORD Fiesta, Fscore / Oruon, Focus, Puma, Sierra, Modeo, Cougar, Couier / Kombi, P100
Mazda 121

Contents:
Crankshaft/Fuel Pump Alignment Pins x2pcs (5.8mm) - 21-260, 303 732
Crankshaft TDC Locking Pin - 21-163, 303 620
Crankshaft Timing Pin - 21-210, 303-507
Crankshaft Timing Pin - 303-193, 21-163
Flywheel Locking Tool - 21-168, 303-393
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Setting Strap - 303-376, 303-367, 21-162B
Timing Pin - 21-210, 303-620
Crankshaft Timing Tool - 21-159, 303-748

Made in China

BMW N63/S63 Camshaft alignment tool set,  50118

Features:
Special designed to fixing the camshaft in TDC position. Checking and adjusting the timing chain tensioner.
Application:
For BMW N63 engine (After Sep. 2012)
For BMW S63 Engine:
S63B44O0
E70 X5M (2010-2013)
E71 X6M (2010-2013)
Wiesmann GT MF5 (2011-present)
S63B44T0
F10 M5 (2011-present)
F12 M6 (2012-present)
F13 M6 (2012-present)
F06 M6 Gran Coupe (2013-present).
OEM Number:
    83302249117 (#2249117)
    83302249140 (#2249140)
    83302249144 (#2249144)
    83302249159 (#2249159)
    83302249162 (#2249162)
    11 8 570 Vibration Damper Lock
    11 9 190 Plug Mandrel / Timing Pin

Made in China

Engine timing tool kit - VAG VW AUDI 1.4 1.6 2.0i TDi CR 2012 ON, 780-8364

An 8 piece kit consisting of the components required to lock the crankshaft. Cam pulleyand fuel pump pulley in their timed positions to allow the removal and replacement of the camshaft timing belt
Contents:
A. 2.5mmTensioner Locking Tool, OEMT10265

B.Auxiliary Drive Tensioner Pin, OEMT10060A

C.Cam Shaft Pulley Timing Pin, OEM 3359

D.Fuel Pump Holding Tool, OEMT10051

E.Crankshaft Timing Tool, OEMT10490

F. 6mm Ball Hex Key, OEMT10264
G.Pin for E
Application: Post 2012 1.6 & 2.0 TDI Common Rail Diesel engines found in the Audi, Seat, Skoda and Volkswagen:
VW: Golf SV/Sportsvan, Golf VII, Golf VII Estate, Golf VII Wagon, Polo
SEAT: Leon, Leon ST
AUDI: A3 Cabrio, A3 Saloon, A3 Sedan, A3/A3 Sportback, A4, A4 allroad, A4 quattro,A5 Coupe/Cabriolet, A5 Sportback, A6, Q5,TT
SKODA: Octavia III
Engine: 1.4TDI CR, 1.6TDI CR, 1.6TDI CR GreenLine, 1.6TDI CR BlueMotion, 1.6TDI CR Ecomotive, 2.0TDI CR, 2.0 RS TDI CR, 2.0TDI CR Ultra
Engine code: CKFB, CKFC, CLHA, CLHB, CNHA, CNHC, CRBC, CRBD, CRFA, CRFC, CRKA, CRKB, CRLB, CRLC, CRMB, CRVA, CRVC, CSUA, CSUB, CUNA, CUPA, CUTA

Made in Taiwan

Engine timing tool kit Opel & Vauxhall 1.6 16V, 1.8 16V, 50651

Suitable for timing applications on all 1.4, 1.6 and 1.8 Twin port petrol engines with belt drive.
Kit comprises camshaft setting tools and Belt tensioner locking pins.
Applications:
Holden/Vauxhall/Opel:: Astra-G (03-06), Astra-H (04-12), Astra-J (09-13), Corsa-D (07-13),
(06-10), Signum (06-08),Vectra-C (06-08), Zafira-B (05-13), Zafira-C Tourer (11-13)
Chevrolet: Aveo (08-13), Cruze (09-12), Orlando (11-13)
Saab: 9-5 (10-12)
Fiat: Croma (06-11), Stilo (05-08)
Alfa Romeo: 159 (05-10)
Кодове на двигателя:
1.4 16V: G14D
1.6: A16LEL, A16LER, A16LET, A16XER, LDE/A16LER, DE/A16XER, LLU/A16LET, Z16LEL,Z16LER, Z16LET, Z16XE1, Z16XEP, Z16XER 192B3.000(Z16XEP)
1.6 ecoFLEX CNG: A16XNT, LGE/A16XNT, Z16XNT
1.8: 2HO/A18XEL, 2HO/A18XER, A18XER, Z18XER, 939A4.000

OEM №: KM-911, KM-6625/EN-6625/2.000.012.800, KM-6340/EN-6340/2.000.012.100, KM-6349/KM-6130/EN-6349, KM-6333/EN-6333, KM-6628-A/2.000.012.000

Made in China

OPEL 1.8; 2.0L - Camshaft locking tool, 9G1201
Features:
Special locking tool for 1.8 / 2.0 16V EcoTec motors on:
Astra G / H | Frontera A | B | Omega B | Vectra A | B
VX220i Speedster | Zafi ra A / B. 2.0 | 2.2 16V gasoline engine
Engine code:
C20SEL | X20XEV | Z20LEH | LEL | LER | ATTENTION X22SE XE
Y22SE | XE | Z22XE (1996 - 2010)
OEM No. 853 KM

Produced by Force, Taiwan