AUTOMOTIVE SPECIALTY TOOLS

Engine timing tool kit Opel & Vauxhall 1.6 16V, 1.8 16V, 50651

Suitable for timing applications on all 1.4, 1.6 and 1.8 Twin port petrol engines with belt drive.
Kit comprises camshaft setting tools and Belt tensioner locking pins.
Applications:
Holden/Vauxhall/Opel:: Astra-G (03-06), Astra-H (04-12), Astra-J (09-13), Corsa-D (07-13),
(06-10), Signum (06-08),Vectra-C (06-08), Zafira-B (05-13), Zafira-C Tourer (11-13)
Chevrolet: Aveo (08-13), Cruze (09-12), Orlando (11-13)
Saab: 9-5 (10-12)
Fiat: Croma (06-11), Stilo (05-08)
Alfa Romeo: 159 (05-10)
Кодове на двигателя:
1.4 16V: G14D
1.6: A16LEL, A16LER, A16LET, A16XER, LDE/A16LER, DE/A16XER, LLU/A16LET, Z16LEL,Z16LER, Z16LET, Z16XE1, Z16XEP, Z16XER 192B3.000(Z16XEP)
1.6 ecoFLEX CNG: A16XNT, LGE/A16XNT, Z16XNT
1.8: 2HO/A18XEL, 2HO/A18XER, A18XER, Z18XER, 939A4.000

OEM №: KM-911, KM-6625/EN-6625/2.000.012.800, KM-6340/EN-6340/2.000.012.100, KM-6349/KM-6130/EN-6349, KM-6333/EN-6333, KM-6628-A/2.000.012.000

Made in China

OPEL 1.8; 2.0L - Camshaft locking tool, 9G1201
Features:
Special locking tool for 1.8 / 2.0 16V EcoTec motors on:
Astra G / H | Frontera A | B | Omega B | Vectra A | B
VX220i Speedster | Zafi ra A / B. 2.0 | 2.2 16V gasoline engine
Engine code:
C20SEL | X20XEV | Z20LEH | LEL | LER | ATTENTION X22SE XE
Y22SE | XE | Z22XE (1996 - 2010)
OEM No. 853 KM

Produced by Force, Taiwan

Crankshaft locking tool set - Ford 2.2 TDCi, 50871

Features: To locking and time the crankshaft and flywheel correctly to allow for fitting of the TDC sensor.
Suitable for Ford Transit 2.2 TDCi engines from 2006, including Econetic and HDT engines.
Contents:
Crankshaft Locking Tool                                                         OEM# 303-1587
Flywheel Locking Tool for engines with Common Rail              OEM# 303-698 / 21-251
Timing Pump Locking Pin                                                        OEM# 0188H / 1860965000

OEM No.: 303-1587; 303-698 / 21-251; 0188H / 1860965000

Engine code: CYFA, CYFB, DRFA, DRFB, P8FA, P8FB, PGFA, PGFB, QVFA, QWFA, SRFA, SRFB, SRFC, SRFD, SRFE, UHFA, CYFC, DRFC, USRA

Made in China

Engine timing tool set - BMW Vanos V8 X6M M-SERIES 550i 750i N63 S63 N74, 50668

Features: Specific tool kit that is required to perform camshaft and VANOS timing for BMW N63 and S63 engines.

Contents:
Crankshaft Alignment Tool – OEM No. 11 8 570
Camshaft Alignment Tool Retaining Bolt and Holder – OEM No. 11 9 891,11 9 892
Camshaft Alignment Tool(2) – OEM No. 11 9 893
Crankshaft Timing Pin – OEM No. 11 9 190

Made in China

Audi A4 A6 3.0L VAG 3.0 V6 Camshaft Alignment Locking Timing set, 50366А

Application: 3.0L V6 AVK Audi A4 3.0 V6 (2001-2008) and Audi A6 3.0 V6 (2001-2008), Audi A6, VW Polo Diesel, Audi A6 with Z15L TDi engines.
Engine code: ASN, BBJ
Not applicable for 5V engines.
OEM tools:
T40011 Cam Belt Tensioner Locking Pin
T40026 Crankshaft Locking Tool
T40030 2 pcs. Camshaft Locking Tools
T40028 Camshaft Sprocket adjustment tool
Content:
2 x C-fixtures tools for locking left and right camshafts
1 x TDC Locking Pin
1 x 3/8 "Drive Camshaft Adjuster Socket.
1 x Tensioner Locking pin.
1 x Tensioner wrench  with handle...

VW T5 Tuareg LT 2.5TDI -Water pump removal tool set, 50373

The water pump of the VW Transporter and the VW Touareg is driven by the gears that drive the engine.
The kit is used to remove the water pump and bring the engine to the top dead center (TDC position).
Application:
VW Transporter T5 (after 2004) 2.5 TDI (engine: AXE, AXD, BNZ)
VW Touareg (after 2003) 2.5 5-cylinder TDI engines (engine: BAC, BPE)
Engine Codes: AXD, AXE, BAC, BLJ, BLK, BNZ, BPC, BPD

OEM No. T10221; T10221A; T10222; T10222A; T10225; T10225A

Made in China

VAG Coolant Pump Thermostat Wrench, 50907

Features: To easy removal and installation of thermostat without causing any unnecessary damage.
Applicable: Audi A3 2013> , VW Golf 2013 >, Skoda Octavia 2013 >, Seat Leon 2013>
Engines: 1.0 TFSi 3-cyl, 1.2 TSi, 1.4 TFSi, 1.4 FSi, 1.4 TDiCR 3-cyl.
OEM Tool: T10508

Made in China

Engine Locking Timing Tool Kit-Ford-Mazda, 50375

Description:

Designed for pulling off the camshaft timing belt wheel and locking or positioning the engine output shafts such as the camshaft and the crankshaft.
Required for changing the timing belt or for engine
Applicable:
FORD 1.8 D/TD/TDCI diesel and 1.25 - 2.0 16V Zetec petrol engine e.g
FORD Fiesta, Fscore / Oruon, Focus, Puma, Sierra, Modeo, Cougar, Couier / Kombi, P100
Mazda 121

Contents:
Crankshaft/Fuel Pump Alignment Pins x2pcs (5.8mm) - 21-260, 303 732
Crankshaft TDC Locking Pin - 21-163, 303 620
Crankshaft Timing Pin - 21-210, 303-507
Crankshaft Timing Pin - 303-193, 21-163
Flywheel Locking Tool - 21-168, 303-393
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Setting Strap - 303-376, 303-367, 21-162B
Timing Pin - 21-210, 303-620
Crankshaft Timing Tool - 21-159, 303-748

Made in China

Petrol Engine Setting/Locking Kit for BMW N62/N62TU V8, N73 V12 - Chain Drive, 50654         

Suitable for setting and adjusting the timing on BMW 3.6, 4.0, 4.4, 4.8 N62/N62TU V8 and 6.0 N73 V12 engines.
Kit includes camshaft setting plates, flywheel locking pin and chain pre-tensioning tool.            
OEM Tools: 11.9.190, 11.9.340, 11.9.461, 11.9.462, 11.9.463        
Applications: 540i E60/61 (05-10), 545i E60/61 (03-06), 550i E60/61 (05-10), 645i E63/64 (03-06), 650i E63/64 (05-11), 735i E65/66 (02-05), 740i E65/66 (05-08), 745i E65/66 (02-05), 750i E65/66 (05-08), 760i E65/66 (02-08), X5 4.4 E53 (03-07), X5 4.8 E53/E70 (04-10)
Engine Codes:
N62/N62TU V8: B36A, B40A, B44A, B48B
N73 V12: B60A...

Camshaft Alignment Timing Tool VW, Audi V6 90, 100, A4, A6 (94-97)
Set includes:
- One camshaft alignment fixture that interfaces with the cam gears and is utilized for the critical task of securing and maintaining TDC timing alignment when the cam belt is serviced or removed for other front-engine or cylinder head service tasks.
- One clamp for securing the camshaft alignment fixture

NOTE: This tool set is only applicable to V6 2-valve engines installed in Audi platforms from 1991-1997. It is not applicable to any 5-valve engines.
Material: Cadmium and black-oxide plated steel
Application Make: Audi
Application Detail: Audi AFC engines - Audi 90, 100, A4, A6 1994-97

Produced by Force, Taiwan

Camshaft Locking tool, 9G1202

Application: ECOTEC 16V 1.4/1.6L

Made in Force, Taiwan

VAG Camshaft Gear Locking Tool - Camshaft sprocket locking tool, 50890

Features: For locking the camshaft in adjusting position required for checking and adjusting the engine timing
Applicable:
Seat Mii 1.0 (3 cylinder) - (from 2012)
Skoda Citigo 1.0 (3 cylinder) - (from 2011)
Volkswagen Up 1.0 (3 cylinder) - - (from 2011)
Engine code: 1.0 CHYA (44 kW), 1.0 CHYB (55 kW), 1.0 CPGA (50 kW)
OEM Tool: T1047

Made in China

Diesel engine timing tools - Ford 1.8 TDDi/TDCi – chine drive, 50328

The kit contains basic tools for timing belt replacement for 1.8D TDi / TDCi diesel engines, fitted for Ford vehicles, suitable for high pressure fuel pump Wet Belt applications. Features injection high pressure pump sprocket removal and timing chain cover alignment tools
Application:
For Ford: C-MAX (07-10), Courier (00-02),
Fiesta (00-02),
Focus (98-11), Focus C-MAX (03-07),
Galaxy (06-10),
Mondeo (07-10),
S-MAX (06-14),
Tourneo Connect (02-13), Transit Connect (02-13)
Engine Code:
1.8D TDCi: BHPA, F9DA, F9DB, FFBA, FFDA, FFWA, HCPA, HCPB, KHBA, KKDA, KKDB, P7PA, P9PA, P9PB, QYBA, QYWA, R2PA, R3PA, RWPA, RWPC
1.8D TDCi ECOnetic: KHBA
1.8D Tdi: BHDA, BHDB, BHPA, C9DA, C9DB, C9DC
1.8D Turbo: C9DC, RTN, RTP, RTQ
OEM Tools:
For Ford: 303-193 (21-104), 303-393 (21-168), 303-376 (21-162B), 303-652 (21-230), 310-095 (23-067)

Made in China

Timing tool set BMW M60, M62, M62TU - Vanos engine,  50653

Contents:
M60 M62 Camshaft Alignment / Timing Tools:  OEM No. B112440
M62 VANOS Camshaft Timing Tool: OEM No. 116450
Rigid chain tensioner: OEM No 114230
VANOS Electromagnetic Valve Socket: OEM No. 116420
M62 Chain Tensioning Bracket Trestle:
TDC pin: OEM No. 112300

Camshaft locking tool SAAB & OPEL, 9G1204

Applicable:

For Saab & Opel

- Vauxhall cavalier 2.5L, Calibra 2.5L

- Vectra 2.5/3, Olit, Sintra 3 LIT

- SAAB 900 2.5, 9000 3.0 V6

Made in Frce, Taiwan