AUTOMOTIVE SPECIALTY TOOLS

Engine timing tool set - VW; AUDI V6 3.2FSI, 741-0047A

Special Designed Set of Tools for Aligment Camshaft Locking and Adjusting.
With 1 Camshaft Adjusting Socket. VM# T40058.
With 2 Camshaft Stopping Pins. VM# T40071.
Applicable: VW, Audi A4/A6/ A8/ Q7/ R8 3.2, 4.2, 5.2 FSI with Engine AUK, A6L/ Quattro 2.4 with Engine BDW.

Made in Taiwan

DSG Clutch Instalation set – VAG, 50842

Designed for the correct removal and installer of twin plate clutches used in VAG 6/7 speed gearboxes as featured in Volkswagen Golf / Touareg и Audi A3
Applicable: VW GOLF (2004 onwards), VW TOUAREG (6 speed) and AUDI A3 (2004 onwards).
Inclded the equivalent to OEM tools:
T10323 - Clutch support device
T10373 – Clitch puller
T10374 – Release bearing setting tool
T10376 – Clutch press piece.

Engine timing tool set – Ford, Mazda & Volvo, 50658

Designed for the belt or chain driven petrol or diesel Ford, Mazda and Volvo engines.
This Ford and Mazda petrol engine timing tool is a four-piece camshaft setting bar that is suitable for all the applications including the latest HWDA, HWDB, HXDA, Zetec and Duratec engines.
This automotive tool covers a huge range which include 1.25 L, 1.4 L, 1.6 L and 1.6 L 16V Ti-VCT engines as well s the 1.8 L, 2.0 L and 2.3 L 16V engines.
Set is suitable for these engines in Mazda and Volvo vehicles.

OEM Tools: Ford; 303-1054, 303-507 (21-210), 303-620 (21-163), 303-574, 303-748, 303-376 (21-162B), 303-376B, Mazda; 49 JE01 061, 303-574, 49 JE02 061, 303-465, 49 JE01 054, Volvo; 999 7152, 999 7151

Applications:

Ford: C-MAX (07-10), Cougar (98-01), Fiesta (95-15), Focus (98-11), Focus C-MAX (03-07), Fusion (02-12), Galaxy (06-12), Mondeo (93-12), Puma (97-02), S-MAX (06-12), Tourneo Connect (02-06), Transit (06-12), Transit Connect (02-06)

Mazda: 121 ZQ (95-00), 2 DY (02-07), 3 BK (03-09), 3 BL (09-15), 5 CR (05-10), 5 CW (10-12), 6 GG/GY (02-07), 6 GH (07-15), MPV LW (02-05), MX-5 NC (05-15), Tribute EP (04-06)

Volvo: C30 (06-13), S40 (06-12), S80 (07-11), V50 (04-12)

Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A

Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.

Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)

Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0

OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760

Made in China

Camshaft Locking tool VW, Audi, Seat, Skoda - 1.4; 1.6 FSI, 50360

Features: For 1.4 & 1.6 16V / 1.4 & 16 FSI petrol  engines (1997 on)
Suitable for VW 1.4 and 1.6 twin camshaft twin belt engines introduced in 1997
Depending on engine type, either the complete bridge and pins or the pins alone may be used
Applicable:
Audi : A2 1.4 (00-06)
Seat: Arosa 1.4 (99-05), ; Cordoba 1.4 (99-08); Ibiza 1.4 (99-08); Inca 1.4 (00-04); Leon 1.4, 1.6 (99-05), Toledo 1.4, 1.6 (99-05)
Skoda: Fabia 1.4 (99-05) ; Octavia 1.4 (99-05)
VW : Beetle 1.4, 1.6 (01-08); Bora 1.4, 1.6 (97-08); Caddy 1.4, 1.6 (99-08); Golf 1.4, 1.6 (97-08); Lupo 1.4, 1.6 (98-05); Polo 1.4, 1.6 (98-07) ...

Engine Timing Tool Set BMW Mini, PSA 1.4 & 1.6, Citroen, Peugeot, 50390

Suitable for timing 1.4 & 1.6 Valvetronic direct injection petrol, chain drive engines, fitted in BMW Mini, Citroen and Peugeot vehicles.
Content:
Camshaft Locking Tool - Inlet
Camshaft Locking Tool - Exhaust
Camshaft Alignment Clamp
Crankshaft Setting Pin M6
Setscrews (4)
Chain tensioner

Models:
Mini One Coupe R56 (2006-2010)
Mini Cooper Coupe R56 (2006-2010)
Mini Cooper HB R55 (2007-2010)
Citroën C4 (2008-2009)
Citroën C4 Picasso (2008-2009)
Peugeot 207 (2006-2010)
Peugeot 207CC (2007-2010)
Peugeot 308 (2001-2010)
Peugeot 3008 (2009-2012)
Peugeot 5008 (2009-2012)

FORD Timing tool set, 904G6

Camshaft alignment tool -BMW N47, N47S, N57 - Diesel engines, 011262439A

Designed for the locking/positioning of camshafts and crankshaft.
Suitable for the 1.6, 2.0 or 3.0 l BMW engine such as BMW 1 Series, 3 Series, 5 Series, 7 Series, X1, X3, X5, X6; Mini Clubman, Countryman, Cooper D, Cooper SD, One D.
Engine codes: N47, N47-C16K1, N47-C16U1, N47-C20K1, N47-C20U1, N47-D20A, N47-D20C, N47-D20D, N47-D20K0, N47-D20K1, N47-D20O0, N47-D20O1, N47-D20U0, N47-D20U1, N47S-D20B, N47S-D20D, N47S-D20T0, N47T-D20K1, N47T-D20O1, N47T-D20U1, N57-D30A, N57-D30A0, N57-D30O0, N57-D30O1, N57-D30T0, N57-D30U0
OEM Ref: 115320,118760,116480,118741,118742,113340

Made in Taiwan

Timing Belt Change Engine Tool Set for Fiat, Ford, Lancia 1.2 & 1.4 8V, 780-8141

Features:
For locking the camshaft and crankshaft in place while you change the timing belt and perform other repairs on Fiat engines.
Kit consists of crankshaft locking tool, camshaft setting plate and belt tensioner adjuster for the 1.2 engine, and additional sprocket locking tool and alignment fixture for the camshaft on the 1.4 VVT engine.

Applicable:
Facilitates changing of the timing belt and allows checking of the engine timing on following cars:
- Fiat: 500 (07-12), Doblo/Cargo (05-10),Grande Punto (07-12), Idea (04-12), Linea (07-11), Panda EVO2, Punto EVO (09-12).
- Lancia: Ypsilon (06-11), Musa (05-12).
- Ford: Ka (09-12).
Fits following engines mdodels:
- Fiat: 1.2/1.2 Dualogic, 169A4.000,188A4.000 (EVO2), 199A4.000 1.4/1.4 Bi-Fuel LPG / 1.4 Natural Power CNG,199A7.000, 350A1.000.
- Lancia: 1.4/1.4 Bi-Fuel LPG, 350A1.000.
- Ford: 1.2 Duratec, 169A4.000 (FP4).
Includes following tools:
- Crankshaft Locking Tool
  to be used as OEM 2.000.004.500 on Fiat/Lancia and OEM 303-1480 on Ford.
- Camshaft Setting Tool
 to be used as OEM 2.000.004.400 on Fiat/Lancia and OEM 303-1479 on Ford.
- Camshaft Sprocket Locking Tool
 to be used as OEM 2.000.004.200 on Fiat/Lancia and OEM 303-1477 on Ford.
- Camshaft Cover Aligner 
to be used as OEM 2.000.004.300 on Fiat/Lancia and OEM 303-1478 on Ford.
- Tensioner Adjuster
 to be used as OEM 1.860.987.000 on Fiat/Lancia.

Made in Taiwan

Camshaft alignment tool - BMW M52TU/M54/M56
This tool set contains a comprehensive set of tools to perform camshaft timing on BMW M52TU, M54, M56 engines.
The kit includes the following:
- For BMW Double VANOS Camshaft Alignment Tool M52TU M54 M56 6-cylinder engines utilized from 1998 onwards
Include:
1) (ref.#116150) Alignment Jig: Adjusting plate for setting valve timing on engine with double Vanos.
2) (ref.#116180) Sprocket Assembly Jig: Use for preassembling secondary chain sprockets with chain on camshafts.
3) (ref.#114220) Rigid Chain Tensioner: Use to tension primary chain.
4) (ref.#113292) Chain Tensioner Lock Pin: Locks chain tensioner during timing.
5) (ref.#113450) VANOS Compressed Air Connection: Use to pressurize the single and double Vanos unit when checking or removing and replacing.
Applicable: for BMW 6 cylinder engine: M52TU (1998-2000), M54 (2001-2004), & M56 (2003 to present).
- For BMW 4 & 6 Cylinder Camshaft Alignment / Timing Tools. Include:
6) (ref.#113240) Camshaft Locking Fixture: Aligns and holds the camshaft in position when assembling cylinder head and replacing timing chain.
Engines: M42, M44, M50, M52, M52TU, M54, M56, S50US, S52US.
7) (ref.#112300)Top Dead Center Pin: Use to lock the flywheel at Top Dead Center when removing or replacing the camshafts or VANOS assemblies.
Engines: M42, M43, M44, M50, M52, M52TU, M54, M56, M60, M62, M70, M73, S50B30, S50B32, S54, S62.
8) (ref.#115490)VANOS Turning Wrench: Use to adjust VANOS position on single VANOS engines when removing or installing.
Engines: M50, M52, S50US, S52US.

Made in: China

Petrol Engine Setting/Locking Kit - BMW N42/N46/N46T 1.6, 1.8, 2.0 chain drive
This timing locking tool set is ideal for timing and adjustment of the twin camshaft on petrol engines. It is also ideal for removing, installing and aligning of vanos unit.
This tool set is crafted by hardened and tempered carbon steel, ensuring its maximum durability for years of use.
Delivery Includes: (BMW OEM-number below for your reference)
1 pc Fixing bridge cam = OEM 119291
1 pc Fixing angle camshafts = OEM 119292
1 pc Fixing screw = as OEM 119293
1 pc Camshaft rotation key = as OEM 19270
1 pc Fixing strip encoder wheels = same as OEM 119350
1 pc Clamping tool = like OEM 119340
1 pc Crankshaft Staking shaft (straight) = as OEM 112300
1 pc Crankshaft Stakeout shaft (angled) = as OEM 119190
Fits the Following BMW - models :
E46 : 316i B18 / B18A; E87 : 118i / 120i; E60 : 520i; E83 X3 2.0; E85 : Z4 2.0; E90/E91 : 318i / 318ti / 320i
Fits the following engine code :N42 , N46 , N46T , B18/-A , B20/-A/-B
Made in China

Petrol engine timing locking tool set for BMW N42; N46, 50387

Contents:

• Intake & Exhaust Camshaft locking device with fixing screws

• Crankshaft Flywheel TDC Locking pin

• Rigid Chain Tensioner Tool

• OEM tools: 11 5 120, 11 9 190, 11 9 270, 11 9 291, 11 9 292, 11 9 293, 11 9 340, 11 9 350

Applications

• BMW E87 118i, 120i N46 engine

• BMW E46 316i, 316ti, 318ti N42 engine

• BMW E90/E91 318i, 320i, N46 engine

• BMW E85 Z4 2, 0l-N46 engine

Engine Codes

• N42 / N46

• B18 / B18A

• B20 / B20A / B20B

Engine Timing Tool Set BMW Mini, PSA 1.4 & 1.6, Citroen, Peugeot, 780-8162

Suitable for timing 1.4 & 1.6 Valvetronic direct injection petrol, chain drive engines, fitted in BMW Mini, Citroen and Peugeot vehicles.
Content:

• Camshaft Locking Tool - Inlet
• Camshaft Locking Tool - Exhaust
• Camshaft Alignment Clamp
• Crankshaft Setting Pin
• M6 Setscrews (4)
• Chain tensioner

Models:

• Mini One Coupe R56 (2006-2010)
• Mini Cooper Coupe R56 (2006-2010)
• Mini Cooper HB R55 (2007-2010)
• Citroën C4 (2008-2009)
• Citroën C4 Picasso (2008-2009)
• Peugeot 207 (2006-2010)
• Peugeot 207CC (2007-2010)
• Peugeot 308 (2001-2010)
• Peugeot 3008 (2009-2012)
• Peugeot 5008 (2009-2012)

 Engine Codes:

• N12
• N14
• EP3 (8FS)
• EP3C (8FR)
• EP6 (5FW)
• EP6C (5FS)
• EP6DT (5FT)
• EP6DT (5FX)
• EP6CDT (5FV)
• EP6DTS (5FY)

Code: 52046

Mede in Taiwan

3 pcs Timing belt double pin wrenches tools set – VW, Audi, 50612

Applications :
Lupo Polo 1.4 TDi PD
Golf, Bora, Polo 1.9 TDi, PD
Beetle, Sharan 1.9 TDi PD
Passat 1.9 TDi PD
AudiA2 /A3 1.4 / 1.9 TDi PD, A4 / A6 1.9 TDi A4 / A6/A8  ALLROAD 2.5 V6TDi

Petrol Engine Setting/locking Kit - BМW 1.6, 2.0 N43 - Chain Drive, 50634
Suitable for setting and adjusting the timing on 1.6 & 2.0 BMW N43 petrol engines.
Kit contains the necessary tools for aligning the Vanos units on the inlet and exhaust camshafts:
- Flywheel Locking Tool
- Timing Chain Tensioner
- Chain Tensioner Locking Pins x2
- VANOS Sensor Alignment Tool
- Camshaft Locking Tool
- Balance Shaft Locking Tool ...