AUTOMOTIVE SPECIALTY TOOLS

Petrol engine twin camshaft timing kit BMW 1.6 N40/N45/N45T, 50659

This kit for 1.6 BMW, 4 cylinder twin camshaft 16V, chain driven petrol engines with vanos units on the inlet and exhaust camshafts.

Contents:
 Vanos alignment plate,
 Camshaft setting plate (inlet),
 Camshaft setting plate (exhaust),
 Flywheel locking pin,timing chain
 Tensioner pre-load tool, camshaft setting
 Plate securing screw.

Works with Models:E81/E87: 116I,  E46/E90: 316I, E46: 316CI, E90: 320si
Works with Gas Petrol engines: N40, N45 B16, N45 B20, N45T

Model Years:
2001–2004 --- 1.6 L N40 Engine
2004–2011 --- 1.6/2.0 L N45 Engine
2003 -2009 --- 116i -1.6 E81 / E87
2001- 2008 --- 316 i - 1.6 E46 / E90
2001 - 2006 --- 316 Ci - 1.6 E46
2001 - 2005 --- 316 ti - 1.6 E46

Will also work with these Chain drive makes BMW, Mini, Citroen, Peugeot

Code: 52074

Engine timing tool set for BMW N51, N52, N53, N54, N55, 50820

Comprehensive tool kit for locking camshaft in TDC position when checking/adjusting camshaft timing, replacing inlet camshaft or timing chain on BMW N51, N52, N53, N54,N55.
This product BMW Engine Vanos Cam Camshaft Timing Locking Master Tool 2.5 3.0 N51 N52 N52K N53 N54 N55
Installing and removal of camshaft/ variable camshaft timing unit.
Checking and adjustment of timing.
Feature:
Setting And Locking Tool Set Designed For A Wide Range Of Bmw 2.5 & 3.0 Chain Drive, Six Cylinder, Twin Camshaft Petrol Engines,
Designed For N51/n52/n52k Valvetronic And N53/n54/n55 Direct Injection Engines
Designed For Locking Camshaft In Top Dead Center Position When Checking Or Correcting Cam Timing,ÿreplacing Timing Chain,ÿreplacing Camshaft For N51/n52/n53/n54.
Includes: vanos Alignment Plate Stdc Locking Pin Cam Alignment Jig Cam Alignment Jig 2 Setting Gauges
Applicable: BMW N51, N52, N53, N54, N55 engine.

    E60:523i,523Li,525i,525Li,525xi,528i,528xi,530i,530Li,530xi,535i,535xi

    E61/E63: 523i,525i,525xi,530i,530xi,535xi,630i

    E64/E65: 630i,730i

    E66/E70: 730Li,X5 3.0Si

    E81/E82: 130i,135is

    E93: 325i,328i,330i,335i

    E83: X3 2.5i,2.5Si,3.0i,3.0Si

    E85/E86: Z4 2.5i,2.5Si,3.0i,3.0Si,Z4 3.0Si

    E87/E90: 130i,323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi

    E91: 323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi

    E92: 323i,325i,325xi,328i,328xi,330i,330xi,335i

Made in China.

BMW Crankshaft pulley holder (N47) , 780-8376
Used for dismantling and replacing the damper disc on BMW N47; N57.
For fixing  the crankshaft pulley when loosening or tightening the center pulley bolt.

11 7 221 - Bracket
11 7 222 - Handle: M8 for N47 / N57
11 7 223 - Screw: M8 for N47 / N57
11 7 224 - Handle: M10 for N47TU / N57TU
11 7 225 - Screw: M10 for N47TU / N57TU
11 6 480 - Crankshaft Rotor Tool
Application: BMW: 325,330,335,525,530,535,730

Made in Taiwan

BMW - 3 pcs Rim Lock socket set, 50440

1/2" Dr. special socket setfor BMW rim locks use
Sizes:
17 teeth х 14.5 mm
10 teeth х 16.0 mm
21 teeth х 16.5 mm

Made in China

Porsche Cayenne 4.5L, 4.8L, Audi Q7 Camshaft Timing Tool Set, 50652 This comprehensive set of tools enables to correct engine timing to be made when replacing the timing belt. Set of two fixtures necessary to set camshaft timing on 2002 – 2009 Porsche Cayenne V8 engines. This tooling is necessary to establish TDC timing any time the cam timing is disturbed for servicing of the cams, cylinder-head, timing chain or variable valve-timing cam phasers.

Еngine timing tool set for VW, Audi, Skoda VAG 1.2FSI/TFSI; 1.4/1.6FSI; 1.4TSI, 50816

Set Include:
Crankshaft Locking Pin,Camshaft Locking Tool for 1.2 TSi ,1.2 TFSi,Camshaft Alignment Tool,TDC Indicator,Tensioner Pin,Timing Cover Alignment,Pins (2) (Guide Pins),Dial Test Indicator .
Application:
Audi: A1, A3 , A3 Sportback, A3 Cabriolet 1.2 1.4 TFSI
Seat: 1.4 TSI Alhambra, 1.2 1.4 TSI Altea/Altea XL, 1.2 1.4 TSI Ibiza mk5/Cordoba, 1.2 1.4 TSI Leon, 1.2 1.4 TSI Toledo
Skoda: 1.2 1.4 TSI Fabia II , 1.2 .4 1.4 TSI Octavia II /Octavia Combi, 1.2 1.4 TSI Rapid Spaceback/ Rapaid, 1.2 TSI Roomster, 1.2 TSI Roomster Praktik , 1.4 TSI Superb II, 1.2 1.4 TSI Yeti
VW:
1.2 1.4 TSI Beetle
1.2 1.4 TSI Caddy mk3/Caddy Maxi
1.4 TSI 1.6 FSI Eos
1.4 TSI 1.6 FSI Golf V, 1.2 1.4 TSI Golf VI, 1.2 1.4 TSI 1.6 FSI Golf Plus, Golf Cabriolet, Golf Variant
1.4 TSI 1.6 FSI Jetta mk3, 1.2 1.4 TSI Jetta mk4
1.4 TSI 1.6 FSI Passat (3C2, 3C5) 2005-2010, 1.4 TSI Passat (362,365) 2010-2014
1.2 TSI Polo (6R , 6C,) 2009-,Polo (6R) 2010-, 1.4 FSI Polo (9N3) 2005-2006
1.4 TSI Scirocco
1.4 TSI Sharan
1.4 TSI Tiguan (2010-), 1.4 TSI 1.6 FSI Touran (2003-2010).
Engine Codes:
1.2 TSi, 1.2 TFSI - CBZA, CBZB, CBZC
1.4FSi - AXU, BKG, BLN
1.4 TSi, 1.4TFSi - BLG, BMY, BWK, CAVA, CAVB, CAVC, CAVD, CAVE, CAVF, CAXA, CAXC, CDGA, CSMA
1.6FSi - BAG, BLF, BLP, BTS.

OEM#: T10170, T10171, T40011, T10340, T10341, T10414.

Made in China

•  

Engine Timing Tool Set VW Audi Seat Skoda 1.8 2.0 TSI; TFSI4V, 50826

Models:
AUDI: A4, A5, A6, Q3, Q5, TT
SEAT: Alhambra, Altea/Altea XL, Exeo, Leon, Toledo
SKODA: Octavia II, Superb II, Yeti
VW: Eos, Golf VI, Passat/Passat CC, Sharan, Beetle, Scirocco, Tiguan

Engines:
1.8 CDAA, CDAB, CDHA, CDHB, CGYA, CJEB
2.0 CCZA, CCZB, CCZC, CCZD, CDNB, CDNC, CDND, CESA, CETA, CFKA, CPSA

VAG 2.4/2.5 TDI Engine Timing Tool Set, 780-8177

Set of engine timing locking tools for use on Volkswagen 2.4D with engine codes AAB, AJA (02/95-03).
• The correct alignment is achieved by placing equal thickness of shims between both ends of the bracket and the cylinder head Camshaft Setting Strap is used to set the correct timing position of the camshaft.
• The centre Part of the bracket fits into the slotted end of the camshaft and the ends of the bracket located on the cylinder head.
• Injection Pump Pulley Setting Spigot is 15.4mm in diameter and is used on engines with a one piece injection pump sprocket.
• The crankshaft damper holding tool prevents the damper from rotating whilst unfastening and refastening the centre bolt.
• This tool should be used with 3/4" Dr. power bar. VW group 2.5TDi common rail diesel engines (belt) in VOLKSWAGEN LT Crafter BJJ, BJK, BJL and BJM engines.

Petrol Engine Twin Camshaft Setting Locking Tool Kit VAG-VW, AUDI FSI, TFSI 1.4L, 1.6L, 780-8193

Application: use for VW 1.4, 1.6 FSI
chain-driven petrol engines
Models:
Audi: A3
Seat: Ibiza
Skoda: Octavia
VW: Golf, Jetta, Polo, Passat, Touran
Engine codes: AXU, BKG, BLN, BAG, BLF,
BLP, BTS
Made in Taiwan

VW, AUDI Crancshaft locking pin M18x1.5, 50767

Features:
To lock the crankshaft at the TDC position

Applicable:
V6, V8 engines.
OEM No.: 3242, T30052.

Engine timing tool set for VW 906G6

- Special designed set of tools for camshaft locking and adjusting

- Applicable: VW - Transporter, LT, Crafter 2.4D, 2.5SDI, 2.5TDI Common rail

Produced by Force, Taiwan

Camshaft alignment tool AL010039

This tool is used for holding both camshafts at the DC position when replacing the timing belt.
Used AUDI & VW moleds with V6 motors with 5 valves per cylinder (except S4)
Engine code - AKB, AUX, AYS, ART, AXQ, AWN, BBD, BCY, BHX, BFM AUDI

Engine timing tool set VW & AUDI FSI 2.0L/TURBO, 50392

Contents:

Audi: 2.0 FSI, 2.0 TFSI, 1.8 Turbo, 1.8, 2.0, 4.2 gasoline, 1.4, 1.9 TDI PD, 2.5 TD, Seat: 2.0 FSI, 1.8 Turbo, 1.6, 2.0 1.4, 1.9, 2.0 TDI PD, 2.0 TDI PD FT4, 2.0 TDI PD, 2.0 TDI PD, 2.0 TDI PD, 2.5 TD, 2.0 TDI, 2.0 TDI PD , 1.8 GTI, 1.4, 4.2 gasoline, 1.2, 1.4, 1.9 TDI PD, 1.9, 2.0 SDI, 1.4 TDI PD BM
Seat belt tensioner Seat: 1.8 Turbo, 1.8 V16. 1.8 Cupra R
Seat belt: 2.0 FSI, 2.0 TFSI, 2.0 TFSI FR (Cupra) gasoline, 1.4, 1.9, 2.0 TDI PD, 2.0 TDI PD, 2.0 TDI PD, 2.0 TDI PD , 2.0 TDI PD FT4, VW: 2.0 FSI petrol, 1.4, 1.9, 2.0 TDI PD, 2.0 SDI
Special Audi: 1.8 Turbo, 2.0 TFSI, 2.0 S, 1.8, 2.0 Seat: 1.8 Turbo petrol
Audi: 1.8 Turbo 1.8, 2.0, 3.7, 4.2, Seat: 1.8 Turbo, 1.4, 1.6 V16, 1.8 Cupra R, 1.4, 1.8, 2.3, 1.9 TDI PD 1.7, 1.9 SDI, Skoda: 1.8 Turbo, 1.8 Turbo V20 RS Benzine, VW: 1.8 Turbo, 2.0 v20, 1.8 Gasoline
Audi 2.0 FSI / S, Seat: 2.0 FRI, 2.0 FSI, 2.0 FSI FT4, 2.0 TFSI, 2.0 TFSI FR (Cupra), vw: 2.0 FSI / TFSI
Audi, Seat, Skoda, VW camshaft switch wrench

OEM Tools:  T10020; T10115; T10252; T40011; 3366; T10060; T10092
Models:
Audi A3 (1996-2009), A4 (1994-2009), A6 (1995-2011), S3 (1999-2013), TT (1998-2014)
Seat Alhambra (1997-2010), Altea/Altea XL (2006-2009), Cordoba (1999-2002), Exeo (2009-2010), Ibiza (1999-2002), Leon (1999-2013), Toledo (1999-2009)
Skoda Octavia/Octavia Tour (1998-2010), Octavia II (2004-2009)
VW Beetle (1999-2011), Bora (1997-2004), Eos (2006-2010), Golf (1997-2012), Golf Plus (2005-2009), Jetta (2005-2009), Passat (1996-2010), Scirocco (2009-2014), Sharan (1997-2010), Touran (2003-2009)
Engine Codes:
1.8: ADR, AFY, AGN, AJP, APG, APT, AQE, ARG, ARH, AVV
1.8T: AEB, AGU, AJH, AJL, AJQ, AMK, AMU, ANB, APP, APU, APX, APY, AQA, AQX, ARX, ARY, ARZ, AUM, AUQ, AVC, AWC, AWT, AWU, AYP, BAM, BFV, BVP, BVR
2.0 FSI: AXW, BHD, BLR, BLX, BLY, BMB, BVX, BVY, BVZ
2.0 TFSI/S/R/TSI: AXX, BPY, BWA, BGB, BPG, BPJ, BUL, BWE, BWT, BYK, BHZ, BZC, BWJ, BYD, CDLA, CDLB, CDLC, CDLD, CDLF, CDMA

VW/Audi 2.5 Tdi V6, Audi A8 3.3 Tdi V8 - Engine timing tools, 50316
Application:
Car models:
VW: Passat (98-05)
Audi:A4 (97-09), A6 (97-05), A8 (97-02), Alloard
Skoda; Superb (02-08)
Engines:
2.5 V6 TDI, 3.3 V8 TDI
Engine code:
AFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH, BFC
Contents:
2xCamshaft locking plates
1xCrankshaft Locking TDC screw

Applicable:
* VW/AUDI 2.5 TDI V6 & AUDI A8 3.3 TDI V8 engines
* AUDI V6 petrol & V6/V8 diesel engines

Made in China

VAG - Timing belt tensioner wrench, 50367
Extra flat type
Can also be used in hard-to-reach areas
5 Way adjustable and 180° pivotable handle
Especially for timing belts on 4- and 5 cylinder VAG engines and VW T4 servo pumps
Distace between pins: 18 mm
Pin diameter: 3 mm
OEM № T10020

Made in China