AUTOMOTIVE SPECIALTY TOOLS

Renault/Nissan 1.4; 1.6; 2.0; 2.5; 3.5 – Engine timing tool set , 50259

Features:
For locking the flywheel and front puller of Renault / Nissan 1.4 cars; 1.6; 2.0; 2.5; 3.5 with two cams, chain-driven petrol engines. It is also for locking the flywheel of M9R / 2.0 and M9T / 2.3 diesel engines.
Engine codes:
H4JT / 1.4
M5M / 1.6
MR4 / 2.0
2TR / 2.5
V4Y / 3.5
OEM equivalent:
МОТ 919-02
ТОТ 1431
МОТ 1716
МОТ 2019
МОТ 1789

Made in China

Subaru Camshaft sprocket holder, 50822

Used to fixing  the Subaru camshaft to the 2.5L Turbo and 3.6L 6-cylinder 2005 engines, including newer models.
Compare with its Subaru factory number 499977500.
Overall tool length: 475mm
Application: Subaru 2.5 L Turbo and 3.6L 6-cylinder engines.

Made in China

Timing tool set for FIAT 2.2; 2.3; 3.0 JTD and 22DT PSA engines, 50601
Used for belt timing as well as chain-driven engines, including later versions, for light commercial vehicles with 2.2; 2.3; 3.0 and PSA engines.
The set contents a water sensor installation socket, crankshaft turning tool, timing cover centring plate, oil pump setting plate as well as camshaft and crankshaft locking tools.
These engines are also found in the Ford Transit.
OEM Tools No:
Fiat / Iveco: 1.860.617.000/99360608, 2.000.016.500/99360614, 2.000.018.200/99360615
Citroen / Peugeot: 0191 / 2A, 0191 / 2B, 0198A, 0198B2, 0198D, 0198G
Ford: 303-698, 303-705 / 21-256
Applicable:
Citroen: Relay/Jumper III (06-12)
Fiat: Ducato (02-13)
Iveco: Daily (03-10), Daily/EcoDaily (09-11)
Пежо: Boxer III (06-12)
Also suitable for PSA engines:
  - Puma 22DT 4HV 100PS
  - Puma 22DT 4HV 120PS
  - F30DT
Engine code:
Citroen / Peugeot:
2.2D Hdi: 4HM, 4HM, 4HV
Fiat:
2.2D Multijet 100: 4HV
2.3D JTD: F1AE0481C
2.3D Multijet: F1AE0481D, F1AE0481N, F1AE3481E
3.0D Multijet: F1CE0481D, F1CE3481E, FCE13481M, F1CE3481N
Iveco:
2.3D: F1AE0481A, F1AE0481G, F1AE0481GA, F1AE0481H, F1AE0481HA, F1AE0481R, F1AE0481RA, F1AE0481UA, F1AE0481VA
3.0D: F1CE0481A, F1CE0481B, F1CE0481F, F1CE0481H

Made in China

BMW Vanos Sprocket turning wrench for M50 and M52 engines, 50053

Features: Used to adjust Vanos position on the BMW M50 and M52 engines.

Applicable: BMW E36 320i; E34 520i; E36 325i; E34 525i; E46 328i;

Engine codes: M50B20, M50B25, M52B28, S50B30US, S52B32

OEM No.: 115490

Made in China

VAG 1.8 / 2.0 TFSI (EA888) - Timing Chain Tensioner Lever, 51007

Allows the timing chain tensioner to be retracted and locked without removing the lower timing cover
Required when replacing the timing chain
Suitable for the following engines / models (TFSI from 2007):
Audi A3, A3 Cabrio, TT, Q3
Seat Alhambra, Altea Freetrack, Exeo, Leon FR, Toledo
Octavia II, IIII Superb (3T), Yeti
Volkswagen Eos, Golf VII, Passat (B6), Passat CC, Passat, Sharan, Beetle, Scirocco, Tiguan
Applicable:
For 1.8 R4 16v TSI / TFSI (EA888):
Audi TT Mk2 (8J), 8P Audi A3, B7 Audi A4, Audi A4 (B8), Audi A5
SEAT Leon Mk2 (1P), SEAT Altea XL
Yeti, Octavia Mk2 (1Z, Ming Rui), Skoda Superb Mk2 (3T)
VW Jetta Mk5 / Sagitar, VW Passat B6, VW Passat CC
For R4 2.0 16v TSI / TFSI (EA888):
VW Golf GTI Mk5; VW Golf GTI Mk6; VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, Volkswagen CC, VW Scirocco, VW Golf GTI Mk6, VW Scirocco, VW Passat B6, Volkswagen CC
Audi A3 (8P), Audi A3 Cabriolet, Audi TT, Audi A4 (B8), Q5, Audi A5, Q5, Audi TT Mk2 (8J), Q3 Audi
Skoda Superb Mk2 (3T), Octavia
SEAT Altea Freetrack SEAT Leon FR, SEAT Exeo
Engine codes (1.8L engines): SADC, ACHD, CDHB, CJEB, CCRDC, CGYA
Engine codes (2.0L engines): CCZA, CDNB, CDNC, CFKA, CCZC, CPSA, CESA, CETA, CCZB, CDND, CCZD

OEM tool: T40243

Length: 480mm

Made in China

Volvo 2.0 - Diesel Engine Timing Tool Kit, 50983

Features: To lock and hold the crankshaft and high pressure fuel pump on the current range of Volvo 2.0L diesel engines in the method specified by the manufacturer.
The kit includes all the special tools required to time the engine when performing a timing belt change.
Applications: Volvo S60 (2011-2018), S80 (2007-), S90 (2017-), V40 (2013-), V60 (2011-2018), V70 (2008-), V90 (2017-), XC40 (2017-), XC60 (2014-), XC70 (2008-), XC90 (2016-).
Engine codes: D4204T11, D4204T12, D4204T14, D4204T16, D4204T17, D4204T20, D4204T23, D4204T4, D4204T5, D4204T6, D4204T8, D4204T9.

OEM No.: 999 7495, 999 7233

Made in China

Jeep/Chrysler/LDV 2.5, 2.8CRD - Belt Drive - Diesel Engine Timing Kit, 50386

Description:
Designed to time 2.5/2.8CRD belt drive engines, fitted with or without balance shafts in Chrysler and LDV vehicles.
Contains camshaft, crankshaft and balance shaft pins, plus tensioner adjuster.
1 x camshaft positioning pin (import), OEM VM.1052
1x camshaft positioning pin (outlet), OEM VM.1053
1x crankshaft positioning pin, suitable for models: Voyager / Grand Voyager 2,5 / 2,8 & LDV Maxus OEM VM. 1068 / VM.
1x crankshaft locating pin for Jeep Cherokee 2,8 OEM VM.
1x crankshaft positioning pin for Jeep Cherokee 2,5 OEM VM.
1x crankshaft positioning pin
1x balance shaft pin
1 x tension adjuster
Applications:
Chrysler Traveler / Big Traveler / Jeep Cherokee (01-08)
LDV Maxus (05-08)
Engine code:
Chrysler: R2516C R2516L R2816K
LDV Maxus: VM2516L

Made in China

BMW M40, M70 - Engine timing tool set, EN9G1212
Features:
This kit will service a wide range of older BMW both petrol belt & chain driven engines.
Used to align/lock camshaft in cylinder 1 TDC firing position duringchain removal & replacement.
2 pieces are recommended for V12 camshaft assembly (though not required.)
Content:
Camshaft alignment tool
Flywheel timing pin
Models:
BMW 3 Series (E36/E46): 316i (1993-2004), 316i Compact (1998-2001), 318i (1993-2001)
BMW 5 Series (E34): 518i (1994-1996)
BMW Z Series (E36): Z3 1.8 (1996-2003), Z3 1.9 (1996-2003)
Engine Codes:
1.6: M43; 16 4E 2, 16 4E 3
1.8: M43; 18 4E 2
1.9: M43; 19 4E 1
OEM №: 11.2.300, 11.3.190

Made in Taiwan

SUBARU 2.0; 2.5l Camshaft Alignment tool, 50501

Features: Specially designed for camshaft synchronization when changing the timing belt.
SUBARU OEM No .: 499207300 (new)
Application:
SUBARU 2.5L DOHC Non-turbo engines, Impreza, Legacy, SVX.
STi 2.0L EJ20 (2002-2005)
STi 2.5L EJ25 (2005-2014)
Material: Aluminum

Made in China

Timing belt tensioner wrench - Renault, 50663

Features: To apply tension to the timing belt during timing belt changing or to repair the engine.
OEM No .: MOT 1135
Application: Renault 1.1L; 1.2L; 1.4L; 2.0L; 2.2L petrol engines (80 - 05).

Professional engine timing tool set Citroen / Peugeot - HPI (Petrol) or HDI (Diesel) Engines, 50685

This comprehensive set tools enables the correct engine timing to be made when replacing the timing belt.
Suitable for use on the most recent cars with either HPI (petrol) or HDI (diesel) engines.
Applicable:
Citroen:   Xsara, Berlingo DW88 (WJY). Dispatch 1.9D WJZ (DW8) 98-02.
               Xsara, Picasso J4 (6FZ) 99-. Xsara, Picasso EW10J4, L4, L5 (RFN) 02-05.
               Xsara, Picasso DW10ATD (RHY) 02-05. DW10TD (RHY) 01-07.
               Xantia C5 Synergie DW10ATED/L (RHZ) 98-02.
               Berlingo Dispatch Relay 2.0 HDi DW10ATED (RHZ) 01-07.
               C4 EW10J4 (RFN), EW10J4S(RFK) 04-07. DW10BTED4 04-08.
               C5 EW7J4 (6FZ) 00-02. C5 EW10J4 (RFN) 00-04.
               C5 EW10D (RLZ) 00-04. C5 DW12ATED (4HX) 00-04.
               Evasion, Synergie EW10J4R/L5 (RFN) 00-02. 2.0 Turbo RFU, RFW, RGX 94-02.
               C8 EW12J4 (3FZ) 02-07. DW10ATED4/L4 (RHT). DW10ATED4 (RHLU).
               DW12TED4/L4. Jumpy, Dispatch EW10J4/L5 (RFN) 00-07.
Peugeot   206, 206CC EW10J4 (RFN) 00-07. EW7J4(6FZ) 98-07.
               307, 307CC EW7J4 (6FZ), EW10J4 (RFN) 01-05.
               406, Coupe EW10J4 (RFN) 00-04.
               406, Coupe EW10J4 (RFN), EW10J4 (RFR) 00-04.
               406, 607 4HZ DW12ATED (4HZ).
               407 EW10J4 (RFR) 04-06. EW10D (RLZ) 00-07. EW12J4 (3FZ) 99-07. EW10J4 (RFN) 00-04.
               607 EW10J4/L5 (RFN) 00-07. EW12J4 (3FZ) 98-02. RFR 98-02.
               806 EW12J4/L5 (3FZ) 00-02. EW10J4 (RFN) 98-02. DW10ATED (RHZ) 98-02.
               807 EW10J4(RFN)02-05. EW12J4/L5(3FZ)02-07. Expert EW10J4(RFN)00-07.
               206; 306 Expert DW8B (WJY). Partner DW8 (WJZ). 1.9D 98-02.

VAG 2.7/3.0 TDI V6 & 4.0/4.2 TDI V8 - Diesel engine setting/locking & HP Pump removal/instalation set, 914G5

Specifically designed for servicing Volkswagen/Audi 2.7 & 3.0 V6, common rail, chain driven diesel engines.
The kit includes special adaptors for turning and positioning the crankshaft, crankshaft alignment pins with flats and side pins to assist in alignment of the crankshaft with the cylinder head.

Content:

• Crankshaft Locking Pin
• Injection Pump/Balancer Shaft Locking
• Crankshaft Turning Tool Type 1
• Crankshaft Turning Tool Type 2
• Camshaft Locking Pin (2pc)
• Camshaft Alignment/Locking Tool
• Camshaft Sprocket Holding Tool
• Tensioning Locking Pin 3.3mm (2pc)

(OEM: T40062, T40041, T40049, 3359, T40058, T40060, 3342)
 

Models:

• AUDI A4 2.7TDI (2001-2008) with Engine Code BPP
• AUDI A4 2.7TDI (2001-2008) with Engine Code BSG
• AUDI A4/A6/A8 3.0TDI (since 2005) with Engine Code ASB
• AUDI A4 3.0TDI (2001-2008) with Engine Code BKN
• AUDI A4/A5 3.0TDI (since 2007) with Engine Code CAPA
• AUDI A6/ALLROADER 2.7TDI (since 2005) with Engine Codes BPP/BSG
• AUDI A6 ALLROADER/A8 3.0TDI (since 2003) with Engine Codes BNG/BMK
• AUDI A6/Q7 3.0TDI (since 2005) with Engine Codes BMZ/BUG/BUN
• AUDI A8 4.0TDi (2003-2010) with Engine Code ASE
• VOLKSWAGEN PHAETON 3.0TDI/PD (since 2004) with Engine Codes BMK/CARA
• VOLKSWAGEN TOUAREG 3.0TDI (since 2005) with Engine Codes BKS/BUN/CASA/B

Codе:

International shipment available. Please ask for price.

Crankshaft Locking Tool W/Steel Plate, HS-E3421
Description:
2.0 PD TDI Diesel engines with oval crankshaft pulley (non-bored engines).
Contents: injection pump drive pulley locking pin and belt tensioner locking plate.
Application:
•Models:
Audi: A4, A6
Seat: Alhambra, Altea, Leon, Toledo
Skoda: Octavia, Octavia RS, Superb
VW: Golf, Jetta, Passat, Sharan, Tiguan, Touran
•Engine codes: BDK, BKE, BLB, BMA, BMM,
BMP, BMR, BNA, BP

Made in China

Ford Transit 2.0TDCi - 32mm Diesel Fuel Filter Socket, 50980

Features: Used for remove and install th fuel filter on Ford EcoBlue 2.0 TDCi diesel engines from 2016. Cut out in the socket clears the fuel drain valve.
Size: 1/2"Dr.; 32 mm 6-pt.
Material: Cr-V (Chrome Vanadium)
Application:
Ford Transit Custom MK8 2.0TDCi 2016 onwards.

Made in China

BMW/Opel/Vauxhall - Camshaft Gear Alignment Tool, 50876

Designed to clamp onto the gear and hold the 2 gear halves in alignment so making the assembly and disassembly easier.
For Vauxhall 1.3 CDTi (B13) diesel camshafts and BMW B37 1.5 Diesel Balance shaft gears.
Applications:
BMW 1.5 Diesel 1 Series 2015<, 2 series 2014<, X1 2015<, BMW Mini One 2014<
Engine codes: B37C15A, B37D15A
Opel / Vauxhall Corsa E, 1.3 Diesel from 2015.
Engine codes: LKU/B13DTE, LKU/B13DTR, LKV/B13DTC
OEM#: 11 5 370 / EN-50509

Made in China