AUTOMOTIVE SPECIALTY TOOLS

Engine Timing Kit Fiat/ Alfa Romeo 1.4L, 50481

Features: To lock the camshaft and crankshaft in position to allow the removal and replacement of the timing belt fitted to the new generation 1.4 Fiat MultiAir engines.
Applicable:
Alfa Romeo:
MiTo    1.4 (105)               Engine code: 955A6.000
MiTo    1.4 (135)               Engine code: 955A2.000
Giulietta   1.4 (170)            Engine code: 940A2.000
Fiat:
Punto EVO   1.4 (105)      Engine code: 955A6.000
Punto EVO   1.4 (135)      Engine code: 955A2.000
Lancia:
Delta1.4                            Engine code: 955A7.000

OEM Tools No.: 2 000 035 100; 2 000 035 300; 2 00 035 200

Made in China

Professional engine timing tool set Citroen / Peugeot - HPI (Petrol) or HDI (Diesel) Engines, 50685

This comprehensive set tools enables the correct engine timing to be made when replacing the timing belt.
Suitable for use on the most recent cars with either HPI (petrol) or HDI (diesel) engines.
Contains important tools for locking the flywheel, locking the crankshaft, locking the camshaft, locking the injection pump shaft, removing the crankshaft pulley, tensioning the toothed belt.

Suitable for petrol engines:
1.9l – 1.1l – 1.4l – 1.6l – 1.8l – 1.9l – 2.0l.
1.6l – 1.8l – 2.0l – 2.2l 16V (turbo and double camshaft).
Diesel engines:
1.4l – 1.5l – 1.7l – 1.8l – 1.9l – 2.1l – 2.5l D / TD / TDI.
1.4l – 1.6l – 2.0l – 2.2l HDI.

Also suitable for identical engines from Fiat, Ford, Nissan, Renault, Rover, Toyota etc.

Made in China

VAG 1.2 TFSI Engine timing tool , 50661

This generation of VAG 1.2 TFSI engines were first introduced in 2010 and are available in vehicles across the four main brands of the VAG Group (Audi, Seat, Skoda and Volkswagen.)
These four cylinder, single camshaft engines, have two valves per cylinder.
A timing chain provides drive between the crankshaft and camshaft.
The engines are turbo charged and use a high pressure direct injection fuel system.
Content:
Crankshaft Locking Pin
Camshaft Setting Tool
Timing Cover Alignment Pins (2)
Models:
Audi A1, A3, A3 Sportback, A3 Cabriolet
Seat Altea, Altea XL, Ibiza, Ibiza Sportcoupe, Leon, Toledo
Skoda Fabia, Fabia Combi, Rapid, Oktavia, Oktavia Combi, Rommster, Yeti
Volkswagen New Beetle, Caddy, Golf, Golf Plus, Golf Cabriolet, Golf Variant, Jetta, Polo, Touran
Engine Codes: CBZA, CBZB, CBZC

Made in China

Ford Transit 2.0TDCi - 32mm Diesel Fuel Filter Socket, 50980

Features: Used for remove and install th fuel filter on Ford EcoBlue 2.0 TDCi diesel engines from 2016. Cut out in the socket clears the fuel drain valve.
Size: 1/2"Dr.; 32 mm 6-pt.
Material: Cr-V (Chrome Vanadium)
Application:
Ford Transit Custom MK8 2.0TDCi 2016 onwards.

Made in China

VAG 1.4 TSI Auxiliary Belt Tensioner Spanner, 50775

Specially designed spanner to allow for access to the auxiliary belt tensioner where access is limited
Used for loosening poly V-belt by turning auxiliary belt tensioner.
Jaw opening: 16mm.
Application: Audi, Seat, Škoda and Volkswagen with 1.4 TSI and TSi Blue Motion engines(1.4L 4-cylinder direct injection engine, turbocharger and supercharger).
Applicable to: Audi: A1 Sport back / 12-15 | A3 / 13-15 | A3 Sport back / 12-15.
Engine Codes : ACT | CPTA | CGGA | CHPA | CMBA | CPTA | CPVA | CRJA | CXSA
OEM No.: T10447

Made in China

Mercedes M177/M178 - Engine Timing Tools Set, 50912
Features:
To fix and align the camshaft in TDC position.
Applicable: BENZ AMG C63, C63S biturbo 4.0L, V8 petrol engine.
Applicable:
Mercedes-Benz G 500 (W463) (2015-2017)
Mercedes-Benz S 560 Coupé (C217) (2017-2020)
Mercedes-Benz S 560 Cabriolet (A 217) 2017-2020
Mercedes-Benz S 560 (W/V222) 2017-2020
Mercedes-Benz GLE 580 (V167) 2019-
Mercedes-Benz GLS 580 (X167) 2019-
Mercedes-Benz S 580 (W/V223) 2021-
Mercedes-Benz C 63 AMG (W/S/C/A 205) 2015-
Mercedes-Benz GLC 63 AMG (X253) 2017-
Mercedes-Benz E 63 AMG (W213) 2017-
Mercedes-Benz GLE 63 (V167/C167) 2020-
Mercedes-Benz GT 63 AMG (X290) 2018-
Mercedes-Benz G 63 AMG (W463) 2018-
Mercedes-Benz E 63 S AMG (W213) 2017-
Mercedes-Benz S 63 AMG (V222) 2017-2020
Mercedes-Benz S 63 Coupe AMG (C217) 2017-2020
Mercedes-Benz GLS 63 AMG (X167) 2020-
Mercedes-Benz GLE 63 S AMG (V167/C167) 2020-
Mercedes-Benz GT 63 S AMG (X290) 2018-
Mercedes-Benz GT AMG (C190) 2017-
Mercedes-Benz GT S AMG (C190) 2015-2020
Mercedes-Benz GT AMG (C190) 2020-
Mercedes-Benz GT R AMG (C190) 2017-
Mercedes-Benz-Maybach S 580 (Z223) 2021-
Mercedes-Benz-Maybach S 560 (X 222) 2017-2020
Aston Martin Vantage AMR 2019-
Aston Martin Vantage V8 Coupé 2017-
Aston Martin Vantage V8 Roadster 2020-
Aston Martin DB11 Coupé V8 2017-
Aston Martin DB11 Roadster V8 2018-
Aston Martin DBX 2020-
Applicable engine: M177, M178 from 2015.

OEM №: 177589014000, 177589001500

Made in China

Vauxhall/Opel 2.0CTDi - Diesel Engine Timing Tool Kit, 50533

Features:

For the replacement of the timing chain within the cylinder head.

For locked the camshafts into their timed position during timing chain replacement.

Application: Vauxhall/Opel 2.0 CDTi - LFS/B20DTH, LFS/B20DTR (2.0 CDTi from 2014).

Models: Antara (from 2016), Cascada (from 2015), Insignia-A/Country Tourer (2014-2017), Insignia-B/Country Tourer (from 2017), and Zafira-C Tourer (from 2014); CDTi EcoFLEX Blueinjection.

OEM# EN 51415, EN 51418.

Made in China

BMW High Pressure Pump and Crankshaft Locking Tool(B series), 50538

Specially designed to fixing and lock high pressure pump to crankshaft when replacing timing chain.
Applicable: BMW B37, B47, B57, B38, B48 engine.
OEM No.: 242082

Made in China

Jaguar-Land Rover-Ford 2.0, 2.2, 2.4, 3.2 TDCi/TDDi - Crankshaft Front Oil Seal Tool, 50951

Developed specifically for the Ford TDCi Duratorq 2.0, 2.2, 2.4 and 3.2 engines found in the Transit, Ranger and Mondeo models. Both components are required when replacing the front crankshaft oil seal and removing the engine front cover.
Application:
Ford Transit:
2.0L Duratorq-DI & TDCI & TDDI (Puma) Diesel 2000-2006
2.2L Duratorq-TDCi (Global Puma) Stage V Diesel 2006-
2.2L Duratorq-TDCi (Puma) Diesel 2006-
2.4L Duratorq-DI (Puma) Diesel 2000-2006
2.4L Duratorq-TDCI (Puma) Diesel 2000-2006
2.4L Duratorq-TDCi (Puma) Diesel 2006-
2.4L Duratorq-TDDi (Puma) Diesel 2000-2006
3.2L Duratorq-TDCI (Puma) Diesel 2006-
Transit Custom 2.2L Duratorq-TDCi (Global Puma) Stage V Diesel 2012-
Ford Mondeo:
2.0L Duratorq-DI & TDCi & TDDi (Puma) Diesel 2000-2007
2.2L Duratorq-TDCi (Puma) Diesel 2000-2007
Ford Ranger:
2.2L Duratorq-TDCi (Puma) Diesel 2011-
3.2L Duratorq-TDCI (Puma) Diesel 2011-
Plus Jaguar X Type X400 and Land Rover Defender

OEM No. 303-679A, 303-682

Made in China

Engine Timing Tool - Renault/Nissan & Vauxhall/Opel 2.0/2.3 DCi/CDTi-M9R/M9T – Chain drive, 50828

Timing Setting and Locking Tool Kit for 2.0/2.3 DCi/CDTi Chain Drive Engines. Fitted for Nissan, Renault and for Vauxhall /Opel Vehicles, with M9R & M9T Engine Codes
To keep Camshaft, Injection Pump Shaft, Crankshaft in a Specific Position when changing a Timing Belt, or during other Engine Repairs and to Remove and Replace the Injection Pump.

OEM Tools: MOT1766, M0T1769, MOT1770, MOT1773, EN-48330, EN-48332, EN-48334, EN-48831, KM-6130

Application:
Renault:
Espace/Grand Espace IV (06-10), Kaleos (08-11),
Laguna ll (05-07), Laguna lll (07-12), Master lll (10-12),
Magane ll (06-10), Scenic/Grand Scenic ll (06-09),
Scenic/Grand Scenic lll (09-12), Trafic ll (06-12), Vel Satis (05-10), Nissan: Primastar X83 (06-10), Qashqai/Qashqai+2 J10 (07-10),
X-Trail T31 (07-12);
Vauxhall/Opel: Movano-B (10-12), Vivaro (06-12)
Engine code:
M9R 2.0dCi: 610, 615, 630, 700, 721, 740, 742, 760, 761, 762, 763, 780, 782, 784, 786, 788, 800, 802, 803, 805, 808, 816, 830, 832, 833;
M9T 2.3dCi: 670, 672, 676, 678, 680, 686, 690, 692, 694, 698

Made in: China

Еngine timing tool kit for VAG 2.5 / 4.9D / TDI PD, 50617
Set comes with:
Camshaft Locking Tool 10 Cylinder - OEM T10194
Clamping Device - OEM T10199
Rotating crankshaft socket (5 Cylinder) - OEM T10225
Crankshaft Locking Wrench (5 Cylinder) - OEM T10226
Aplicable:
Transporter T5 / Caravelle 2.5 TDI PD 2003-2011
Touareg 2.5 TDI PD, 4.9 5.0 V10 TDI 2003-2011
PHAETON 4.9 5.0 V10 TDI 2002-
Engine Codes:
2.5 TDI- AXD, AXE, BAC, BLJ, BLK, BPD, BPC, BPE and BNZ
4.9 5.0 TDI- AYH, AJS, BLE, BWF

Diesel engine setting/locking kit 2.3D JTD; 3.0D JTD; 3.0D Hdi, 50674
Suitable for adjustment and engagement of the Fiat 2.3D JTD diesel engine, the Fiat 3.0D JTD diesel engine and the Citroen / Peugeot 3.0D Hdi diesel engine (Chain Drive).
The set includes camshaft adjustment pins, crankshaft locking bolts and a locking sensor.

Made in China

Volvo T6 3.0 & 3.2 - Engine timing tool set, 50817          

Features: For Volvo T6 3.0 & 3.2 Engines             
Fitted to S80, XC60, XC70 & XC90 2007 on           
Designed for checking and adjusting the engine timing               
Fits on Volvo S80, XC90, XC60, XC70 3.0T, 3.2 with T6 engine as of 2007
Includes camshaft and crankshaft locking tool 
Contents:
Camshaft locking tool - OEM 999-7261 
Sprocket removal tool - OEM 999-7263/7264/7272         
Camshaft alignment tool - OEM 999-7257           
Also fits Land Rover 3.2 i6 2006 on          
Camshaft locking tool - OEM 303-1223 
Sprocket removal tool - OEM 303-1225/6
Camshaft alignment tool OEM 303-1219

Made in China

VAG - Timing Belt Tensioner Wrench, 50669

For adjusting the timing belt at the tensioner roller.
Suitable for Audi, Volkswagen, Seat, Škoda vehicles.
Distance of pins: 18 mm
Pin diameter: 3mm
OEM#: 3387

Made in China

Mercedes M282 – Timing tool set, 50542

Features: For changing the timing chain and setting the timing for:
Mercedes A-class W177 A200
Mercedes B-class W47 B180, B200
Renault / Dacia / Nissan with TCe turbo engines
M282.914 / H5F / H5H / HRA2

Made in China