AIR TOOLS

Airless Paint Sprayer Painting Machine Ceiling Spray Gun AP8628

Widely used in the coating of ships, rolling stock, chemical equipment, steel structures, small and medium-sized interior and exterior walls, commercial and industrial buildings.

Features:
Easy to disassemble the suction tube, easy to maintain and clean.
The sealing ring is super wear-resistant.
Economical and practical, cost-effective.
The new circuit control makes the voltage more stable.
Rated Voltage: 220±10%(V)/110V
Frequency: 50Hz
Motor: Brush motor
Motor power: 950±10%W
Max pressure: 3000PSI
Max flow rate: 2.0±10%(L/min)
Standard Nozzle size: 0,43 mm (0.017”). Max nozzle size for single gun 0,53mm (0.021'')
Output connection: 1/4-18NPSM
Length of high pressure hose: 15m  (Max length: 50m)

Weigh: 11 kgs

Made in China

AEROPRO Dust Extractor Collector, A302

Description:
Multiple Filtration&Water Filtration.
Dust Collecting More Than 99%
Adjustable Motor Speed.
Advanced Blow And Back Flush Function.
With Aeropro Professional Air Self Vacuuming Sander.
Can connect to 2 pcs of air sanders at the same time.

Technical parameters:
Voltage: 220V/50Hz
Power: 1600 W
Dust Collecting Barrel: 30L

Weight: 21 kg

Mini 887 Middle level mini Spray Gun

Stainless steel nozzle and needle.
Teflon seals for air valve and needle offer solvent resistant. ldeal for all-purpose application for automotive and industry
HVLP with technology available.
Gravity type

Rated pressure (bar / psi): 2.0 Bar (29 Psi)
Pattern width (cm): about 10-15
Air consumption: 120-200 l / min
Tank capacity (ml): Plastic, 125 ml
Nozzle size (mm): 0.5; 0.8; 1.0 or 1.2
Input nozzle size: 1/4 (bsp / npt / nps)
Weight: 0.400 kg

Code:
51372 - nozzle 0,5
51387 - nozzle 0.8
51309 - nozzle 1,0
51396 - nozzle 1,2

Made in China

Pneumatic Needle Scaler RP7658

Features:
Best choice for small scale removal of mentle, rust and paint of construction industry, automobile industry and funriture industry.
Main features:
Precision heat-threated needles for maximum performance.
Nineteen 1/8" diameter steel needles.
Max. Working Pressure:  6.3bar (90PSI)
Technical Data:
Blow Per Min: 4500
Air Consumption: 79.2 l/min. (2.8 cfm)
Chisel Shank: 10.2mm (2/5")
Bore Diameter (ID): 19mm (3/4")
Air Inlet (NPT): 1/4"
Air Hose (ID): 3/8"
Net Weight: 1.97 kgs

Made in China

Pneumatic CV Joint Boot Inastallation tool, 50425

It is used for mounting elastic CV boots without removing drive shafts from the vehicle or the CV joint from the drive shaft.
Used with air compressor.
Suitable for rubber bellows. The tool is not suitable for PVC boots.
 Diameter of the boot: 20 - 110 mm
Material: Aluminum steel
Maximum pressure: 8 Bar (116 Psi)
Air Inlet: 1/4 "

Made in China

3/8” Reversible Air Drill AP17106

Lightweight body made of composite material, resistant to both low and high temperatures;
The rotor is heat treated;
High precision chuck;
The elements of the machine are made of high quality materials for a long service life.
Parameters:
Chuck: 3/8 "
Free speed: 1800 rpm
Air Inlet (NPT): 1/4 "
Air hose: 3/8 "(ID)
Overall length: 170 mm
Average air consumption: 113.3 l / min (4 cfm)
Sug.Air Comp: 2HP
Net weight: 0.94 kg

Made in China

PJQ-2 Hand Grease gun

Compact design, light and comfortable to work with.
It is widely used in car repair shops, industry, production and others. industries for maintenance of agricultural, aviation, construction, etc. machines, as well as in shipping, etc.
Equipped with flexible and metal extension
Tank capacity: 400ml
Tank material: carbon steel with painted
Inlet size: 1/4 "
Weight: 1,600 kg.

Made in China

Air grease gun w/4pcs accessories, 0082
Features:

• 1pc-air grease gun
• 1pc-handle
• 1pc-rubber tube
• 1pc-aluminum tube
• 1pc-quick coupler

Specification:
Highest pressure: 90 Psi (6 Bar)
Operating pressure: 4.0 Bar
Capacity: 500cc(bulk)/16 oz
Air hose: 3/8"
Air Inlet: 1/4"
Air consumption: 3.5 - 6 cfm (100- 170 l/min)

Made in China

2-in-1 Brad Nailer and Stapler, SF5040E

Features:
Nail head and drive pin are processed by German Ipsen heat treatment, high strength, wear resistance.
More than 10-15 million times Pin life.
Jamed nail rate at about 0.03%.
Air-class cushion bumper wear-resistant bumper.
Sequential fire function.
High-strength hard alumina shell wear resistanc.
When the nail is used up, it will be displayed on the clip.
Handle sheath TPE material is soft and will not crack.
High-strength aluminum alloy die-casting gun body.
Nail Depth adjustment device for different occasions.
360 degree exhaust cover

Technical Parameters :
Max pressure: 120psi (8.3bar)
Load capacity: 100pcs
Operating pressure: 60-100psi (4- 7bar)
Max.pressure: 120psi
Nail length: 10-50mm
Stapler length:  16-40mm
Stapler width: 5.7 mm
Weight: 1.48kg (3.26lb)
Dimension: 55 x 245 x 250 mm

Air Hammer, AP17621

4 chisels to meet different requirement.
Heat treated chisels.
High-performance motor and high quality alloy steel piston.
Composite with glass fiber body,light weight and not easy to be deformed  in low or high temperature.
Technical Data:
Chisel Shank: 2.5"(10.2mm)
Bore Diameter: 1.69"(43mm)
Free Speed: 4500Rpm
Air Inlet (Npt): 1/4"
Air Hose(Id): 3/8"
Avg.Air Consumption: 2.8cfm(79.2l/min)
Sug.Air Conmp: 2 HP
Net Weight: 0.98 kg
Overall Length: 140mm

Made in China

190mm Penuamtic air hammer with 4 Round/Hex Chisel Shank, 93969

Features:
Heavy duty
Super power for car tire maintenance & assembly line
Specification:
Chisel shank: 0.401(0.410)
Bore diameter: 3/4"(19.05mm)
Piston stroke: 2-5/8"(66mm)
Blow per min.:3500
Air inlet: 1/4"
N.W.: 1.44 kgs

Made in China

Air Body Saw 93970
It is used for cutting and shaping of a wide range of metal and plastic materials.
Cast aluminum body.
Rubber handle with ergonomic grip.
Speed and cutting efficiency.
Application: For cutting through rods, pipes, bars and even 16 gauge sheet metal with speed and efficiency

Technical Data:
Stroke per minute: 10000 spm
Stroke Lenght: 8-10 mm
Cutting capacity (steel): 1.5 mm)
Cutting capacity (aluminum): 2.0 mm
Air Pressure: 6 Bar
Air Inlet: 1/4”
Air Hose: 3/8" (I.D.)
Avg.Air Consumption: 4 cfm (114 l/min.)
N.W.: 0.65 kgs

Professional machine for polishing and sanding surfaces of wood, metal, polyester, etc. materials.
Ergonomic and compact design. Convenient to work with one hand. Equipped with a system for dust extraction in a bag or a local dust extractor.
Specifications:
Sanding Pad: 125 mm
Hose length: approx. 105 cm
Eccentric orbit: 2.5 mm (5 mm)
Idle speed: 10000 rpm
Air Inlet : 1/4 "
Air hose: 3/8 "(inner diameter)
Air consumption: 15 cfm (425 l / min)
Recommended Air pressure: 6.3 bar (90Psi)
Spindle thread: 5/16 ”-24 female thread

Professional machine for polishing and sanding surfaces of wood, metal, polyester, etc. materials.
Ergonomic and compact design. Convenient to work with one hand. Equipped with a system for dust extraction in a bag or a local dust extractor.
Specifications:
Sanding Pad: 150 mm
Hose length: approx. 105 cm
Eccentric orbit: 2.5 mm (5 mm)
Idle speed: 10000 rpm
Air Inlet : 1/4 "
Air hose: 3/8 "(inner diameter)
Air consumption: 15 cfm (425 l / min)

6” (150 mm) Air Polish (Side exhaust), AP17316

Main features:
Mainly used in shipbuilding, automotive and other industries for polishing and cleaning.
Composite plastic body, light weight.
Unique ergonomic design.
Side exhaust.
RECOMMENDED AIR PRESSURE: 6.3 Bar (90 Psi)
Specification:
Sanding Pad: 6"
Free Speed: 10000 Rpm
Air Inlet (Npt): 1/4"
Air Hose(Id): 3/8"
Avg. Air comsumption: 5 cfm (141.5 l/min)
Recommended Air pressure: 90 Psi (6.3 Bar)
Sug.Air Comp: 2HP
Net Weight: 1.84kg
Overall Length: 240 mm

Optional: Sanding pad Ø150 mm - 12.00 lv.