DIAGNOSTIC SETS

Vacuum pressure pump brake bleeding kit, 50404A
Easily bleed brakes and test automotive vacuum systems by yourself
Works on all vehicle makes and models
Replaceable O-ring cylinder head gasket, rubber piston ring and valves
Precise pressure gauge: 0 -30inHg, 0 -760mmHg ...

7 Piece Pressure Loss Testing Kit, 50503

For checking pressure tightness of single cylinders on Diesel and gasoline engines.
Includes:
Dial indicator
M12 x 1.25 mm adaptor for motorbikes
M10 x 1.00 mm adaptor for motorbikes
M24 x 2 mm adaptor for diesel engines
M12 x 1.25 mm adaptor with 7 mm hole for VW diesel engine
Adaptor for multi valve engines
Adaptor for M14 x 1.25 and M18 x 1.5 mm
Working pressure: 6 - 12 bar
Maximum pressure 6.8 bar / 100 PSI.
Note: Before connecting to compressed air system the adjusting valve must be closed.Connect the device to the compressed air system and open the adjusting valve slowly until the pointer reaches the 0-mark.

Made in China

Fuel & Air Conditioning Disconnection Tool Set, 50123

Comprehensive set for separating automotive air conditioning hoses and fuel lines.
Suitable for a wide variety of vehicles including amongst others Ford and Vauxhall/Opel.

Made in China

Vacuum tester and brake bleeder, 50411

The Vacuum/Pressure Pump may be used for many different tasks.
1. Testing vacuum-operated components (door locks, actuators,etc)
2. Engine mechanical testing (valves, cam timing, head gasket, etc)
3. Brake and clutch hydraulic system bleeding
4.Measurement of vacuum supplied by booster reservoirs solenoids or the engine.
Features:
Checks vacuum/pressure
Operated automotive components.
Can be used to bleed hydraulic  systems or siphon fluids.
Detailed used instructions and photos inside of case.
Hand pump with built-in vacuum pump
Assorted vacuum hoses
Assorted hose adapters
Universal cup adapter
4 ounce reservoir jar
Jar lids

Quick Petrol Engine Compression Test Kit, 50726
Easy-reading 2 1/2″ diameter gauge, features color-coded quadruple, calibrations with 0-300psi, 21kg/cm, 21bar & 2100 kPa.
13″ durable rubber hose with 14mm/18mm adapter.
6″ heavy-duty stem with universal rubber cone adapter fits all plug holes...

Diesel engine compression test set for truck, 50198
Gauge: 0-70 Bar (0-1000 Psi)
Hose lenght: 360 mm
Anglepiece for difficult to reach spaces.
Integrated reset for repeated measuring without dismantling.
All adapters have quick change fittings.

Fuel Injection test kit, 50195

Description:

Fuel injection test set, 50199

The car fuel pressure diagnostic kit is suitable for most vehicles with a fuel injection system with petrol or gas engines (except Bosch, CIS Jetronic, Throttle Body Systems on GM cars).
Not suitable for diesel engines with high pressure injection pump or direct injection engines due to the low pressure range of the manometer.
Fuel pressure testing is an essential part of the fuel injection system troubleshooting process.
Contents:
The set is equipped with various fittings and connection hoses for testing.
15 "length hose is used for direct connection to 1/4" SAE standard fuel pump shredder valve
An 8 "length hose is for the M6 ​​fuel pressure test hole, and there are also adapters M8; M10; M12; M14 for the corresponding test port on fuel rail.
Aluminum tee to support the connection between the fuel pump and the engine for most cars.
Manometer, protected with a rubber shell, with a diameter of the dial 3-1 / 2 ", with a range of 0-10bar (0-140psi) and two-color coded scale for easy reading. The hoses use rubber nylon resin and the built-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16 "fuel drain hose help to safely release the pressure and easily restore the fuel.
Fuel pump pressure check:
The manometer is designed to easily and quickly check the pressure of the fuel injection pump and the fuel flow.
You can compare the pressure value with the manufacturer's recommended reference range to help diagnose the petrol engine system.
Low fuel pressure can be caused by kink/leak/clog on inlet supply side components, a bad fuel pump or regulator, low tank pressure
High fuel pressure may be caused by a bad fuel pressure regulator or kincked outlet return line.

Made in China

Multiple-function cylinder pressure meter, 50194

Tests compression on all domestic and imported cars and trucks with gasoline engines.
Long flex hose and adapters eliminate the need to remove secondary equipment such as power brakes, steering, air conditioning and manifold components.
Side release valve allows quick re-testing of cylinder without removing the tester or adapter.
Large 2-1/2" gauge with dual ince/metric readings: 0 -300 PSI and 0 -21 kg/cm2.
Set includes 14mm/18mm solid short adapter, 14mm/18mm  long flexible adapter and 14mm long reach adapter.

The set is in blue case.

Made in China

Diesel engine compression test set, 50196
Use to identify worn valvesand piston rings
Includes adaptors for most diesel cars, trucks and tractors
Easy to read dial gives an accurate measurement of individual cylinderpressures to a maximum of 70Bar
Suits both direct and indirectinjection diesel engines
Suitable for diesel engines on truck, car, generators, and other machinery
Comes in a blow-mould case to keep your tools safe and in easy reach.
Manometer dial gauge measures in both PSI and BAR ratings.
Also features quick-connect fittings for quick and easy changes.

Contents:

- Glow plug adaptor: M10x1, 91 mm
- Glow plug adaptor: M10x1, 119 mm
- Glow plug adaptor: M10x1.25, 135 mm
- Glow plug adaptor: M22x1.5, 118 mm
- Dual gauge: 340 mm
- Glow plug adaptor: M10x1, 113 mm
- Glow plug adaptor: M10x1, 102 mm
- Glow plug adaptor: M10x1, 83 mm
- Glow plug adaptor: M10x1.25, 64 mm
- Glow plug adaptor: M12x1.25, 47 mm
- Screw adaptor: 160 mm
- Injector adaptor: M24x1.5, 88 mm
- Injector adaptor: M22x1.5, 73 mm
- Injector adaptor: M24x2.0, 63 mm
- Injector adaptor: M20x1.5, 75 mm
- H fittng
- Bleed valve

Applicable: BMW, Mercedes, Carbodies, Mitsubishi, Citroen, Nissan, Dacia, Opel, Diahatsu, Peugeot, Fiat, Renault, Ford, Rover

The set is in red case

Petrol Engine Compression Test Kit, 50192

Compatible for use on petrol engines motorcycles and automotive vehicles.
Included are a variety of thread sizes to suit different nozzle attachments.
Compact with easy to read gauge makes it an ideal accessory for the mechanically minded.

14 pcs radiator cooling system pressure tester kit
Heavy-duty pressure test kit is suitable for wide range of vehicle applications and for locating leaks in vehicle cooling system. Heavy-duty pump unit features smooth action and easy-to-read scale. Ideal instrument for testing for leaks; head gasket, radiator, heater core and header tank.
Features:Updated kit which includes two new caps suitable for newer Ford and Vauxhall/Opal vehicles

• Heavy-duty pressure test kit
• Aluminum radiator header tank caps are color-coded for ease of use and have quick release fittings.
• Suitable for wide range of vehicle applications
• Locate system leaks from: head gasket, header tank, radiator, and heater cores
• Water pump, plugs, hoses and housings
• Heavy-duty pump unit features smooth action and large, easy-to-read, scale
• Long hose aids easy use of the gauge and quick release is fitted with pressure release valve for safe operation
• Set supplied with thermometer and packed in rugged carry-case

Applications: Alfa Romeo, Audi, BMW, Citroen, Fiat, Ford, Isuzu, Jaguar, Jeep, Lexus, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Subaru, Suzuki, Toyota, Vauxhall/Opel, Volvo, VW

Made in China

Flow Meter Set For Common Rail Diesels With 24 pcs Adapter, 50183
Features:  For use on up to 6 Injectors. Measures the amount of fuel the injectors return to the deposit tank.

Measures the amount of fuel the injectors return to the deposit tank.
It can identify damaged or clogged injectors quickly and easily
Direct measurement of return flow of the injector, using external flow meter.
24 adaptors for Bosch-01, Siemens-02, Denso-03 and Delphi injectors.

Flow Meter and Adaptor set for Common Rail Diesels, 50211

Description:
This flow meter and adaptor kit is designed to measure the return fuel flow of diesel vehicles up to 8 cylinders equipped with a common rail injection system to determine if an injector is damaged.
Package includes:
8 adapters for Delphi injectors.
8 adapters for Denso injectors. 8 transparent fuel-resistant pipes.
8 graduated tank bottles for the engines depending on the function (capacity 0 ml).
8 graduated pressure gauge tubes for use when starting the engine (capacity 9 ml).

Made in China