DIAGNOSTIC SETS

Car Battery Tester, KW600

Features:
- Simple and easy to use
- Test batteries IN/OUT of the vehicle
- Accurate results in milliseconds
- Battery Life Analysis
- Analysis Result: Good or Replace
- Large and easy-to-read LCD display
 - Test results based on CA, CCA, BCI, MCA, JIS, SAE, EN, GB, DIN and IEC Standards
- Multilingual interfaces
- Vehicle cranking system test cranking time, voltage and status
- Vehicle charging system test load voltage, unloaded voltage, ripple status and  charging system status
- Testing results storage, review and upload to computer for printing and deep analysis.
- Life time update free and print via PC
- 1 year manufacturer warranty

Function:
- Test result: Good or Replace
- Capacity – Cold cranking Amps (CCA), DIN, EN and IEC information
- Relative to battery rating
- Internal resistance value (mΩ)
- Life in percentage (%)

Application:
- Use to test a wide range of 12V batteries (Starting (SLI), Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM), EFB and GEL Cell.
- The major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN GB, DIN and IEC are supported.

Benefits:
- Conductance correlates directly to the battery capacity Passive testing method is safe.
- Never dischargers or drain the battery.
- Able to test condition of discharged battery.
- Consistent and repeatable results.
- Provides unique indication of battery conditions.
- Besides, this analyzer also provides check the Alternator’s charging and Starter’s cranking conditions.
- It is maintenance free and no internal batteries required.
- It power up when connected to the battery posts during testing.

Specifications:
- Display: Color TFT LCD screen
- Operating temperature: 0° to 50° C (32°-122°F)
- Storage temperature: -20° to 70°C ( -4 – 158°F)
- Weight: 0.38 kg
- System voltage: 12Volts
- Input voltage range: 8V – 16V
- Power requirements: No internal batteries required
- Power on when hooked up during testing

See the next video

Fuel Injection test kit, 50195

Description:

Multiple-function cylinder pressure meter, 50194

Tests compression on all domestic and imported cars and trucks with gasoline engines.
Long flex hose and adapters eliminate the need to remove secondary equipment such as power brakes, steering, air conditioning and manifold components.
Side release valve allows quick re-testing of cylinder without removing the tester or adapter.
Large 2-1/2" gauge with dual ince/metric readings: 0 -300 PSI and 0 -21 kg/cm2.
Set includes 14mm/18mm solid short adapter, 14mm/18mm  long flexible adapter and 14mm long reach adapter.

The set is in blue case.

Made in China

Diesel engine compression test set, 50181
For Direct and Indirect Engines
Dual Scale Gauge
Glow Plug Adaptors - M10x1.0 / M10x1.25 / M12x1.25 / M14x1.25
Dummy Injectors M20x1.5 M24x2.0
Stanadyne Dummy
Replacement Seal and Washer Set
90 Degree Elbow
Clamp Plate.

6-24V Car Voltage Tester, 75142

Features:
Used to detect power, ground and find shorts and breaks in wires.
If the circuit is good, the indicator will light.
Quickly check automotive headlights, taillights, turn signal circuits, faulty sockets, connections, fuses, broken wires and more.
Convenient, time-saving and economical, more intuitive and perfect for automotive use.
Small volume, compact structure, equipped with a clip, convenient to carry. Specifications:
Material: Pure copper
Product size:
Pen body: 105 mm
Line length 650 mm
Product weight: 40g
Bulb type: neon bulb
Bulb power: 3W
Testing Range: DC 6V-24V
Package Includes: 1 x Car Circuit Tester

Made in China

Diesel engine compression test set, 50196
Use to identify worn valvesand piston rings
Includes adaptors for most diesel cars, trucks and tractors
Easy to read dial gives an accurate measurement of individual cylinderpressures to a maximum of 70Bar
Suits both direct and indirectinjection diesel engines
Suitable for diesel engines on truck, car, generators, and other machinery
Comes in a blow-mould case to keep your tools safe and in easy reach.
Manometer dial gauge measures in both PSI and BAR ratings.
Also features quick-connect fittings for quick and easy changes.

Contents:

- Glow plug adaptor: M10x1, 91 mm
- Glow plug adaptor: M10x1, 119 mm
- Glow plug adaptor: M10x1.25, 135 mm
- Glow plug adaptor: M22x1.5, 118 mm
- Dual gauge: 340 mm
- Glow plug adaptor: M10x1, 113 mm
- Glow plug adaptor: M10x1, 102 mm
- Glow plug adaptor: M10x1, 83 mm
- Glow plug adaptor: M10x1.25, 64 mm
- Glow plug adaptor: M12x1.25, 47 mm
- Screw adaptor: 160 mm
- Injector adaptor: M24x1.5, 88 mm
- Injector adaptor: M22x1.5, 73 mm
- Injector adaptor: M24x2.0, 63 mm
- Injector adaptor: M20x1.5, 75 mm
- H fittng
- Bleed valve

Applicable: BMW, Mercedes, Carbodies, Mitsubishi, Citroen, Nissan, Dacia, Opel, Diahatsu, Peugeot, Fiat, Renault, Ford, Rover

The set is in red case

Petrol Engine Compression Test Kit, 50192

Compatible for use on petrol engines motorcycles and automotive vehicles.
Included are a variety of thread sizes to suit different nozzle attachments.
Compact with easy to read gauge makes it an ideal accessory for the mechanically minded.

Fuel injection test set, 50199

The car fuel pressure diagnostic kit is suitable for most vehicles with a fuel injection system with petrol or gas engines (except Bosch, CIS Jetronic, Throttle Body Systems on GM cars).
Not suitable for diesel engines with high pressure injection pump or direct injection engines due to the low pressure range of the manometer.
Fuel pressure testing is an essential part of the fuel injection system troubleshooting process.
Contents:
The set is equipped with various fittings and connection hoses for testing.
15 "length hose is used for direct connection to 1/4" SAE standard fuel pump shredder valve
An 8 "length hose is for the M6 ​​fuel pressure test hole, and there are also adapters M8; M10; M12; M14 for the corresponding test port on fuel rail.
Aluminum tee to support the connection between the fuel pump and the engine for most cars.
Manometer, protected with a rubber shell, with a diameter of the dial 3-1 / 2 ", with a range of 0-10bar (0-140psi) and two-color coded scale for easy reading. The hoses use rubber nylon resin and the built-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16 "fuel drain hose help to safely release the pressure and easily restore the fuel.
Fuel pump pressure check:
The manometer is designed to easily and quickly check the pressure of the fuel injection pump and the fuel flow.
You can compare the pressure value with the manufacturer's recommended reference range to help diagnose the petrol engine system.
Low fuel pressure can be caused by kink/leak/clog on inlet supply side components, a bad fuel pump or regulator, low tank pressure
High fuel pressure may be caused by a bad fuel pressure regulator or kincked outlet return line.

Made in China

Dial indicator 0-10 mm, 51313

Graduation: 0.01 mm
Diameter: 58 mm
Stem diameter: 8 mm
Lug back.
Jeweled bearing.
DIN 878

Made in China

Petrol Engine Compression Test Kit, 50184

Suitable for most petrol engined cars and light commercials.

Ø57mm Gauge fitted with heavy rubber bumper, 150mm hose and M14/M18 fitting.

Scale reads from 0-20bar(0-290psi).

Includes 5 adaptors and 2 thread chasers covering 4 plug thread sizes.

Supplied in carry-case.

Made in China

Fuel Synchronization test set, 50504

Designed for synchronization of automobile, motorcycle and other carburetor engines as well as injection engines.
Allows even adjustment of the amount of mixture in the individual cylinders and thus regular engine operation Pressure gauges can measure both vacuum and pressure. The vibration intensity of the indicator when the engine is running is regulated by the gas valves.
The kit includes the most used adapters that you can use when tuning several types of motorcycles.
Contents:
4 pcs. gauges - diameter 85 mm, fixed on the plate
4pcs. rubber hoses 8x5 with a length of 750 mm
4 extension tubes 3.9x52 mm
4 extension tubes 3.9x122 mm
8 pcs. Conical type connectors 8x40 mm
4 pcs. tubes 10x53 mm (M6X0.75)
4 pcs. tubes 10x60 mm (M6X1.0)

Made in China

14 pcs radiator cooling system pressure tester kit
Heavy-duty pressure test kit is suitable for wide range of vehicle applications and for locating leaks in vehicle cooling system. Heavy-duty pump unit features smooth action and easy-to-read scale. Ideal instrument for testing for leaks; head gasket, radiator, heater core and header tank.
Features:Updated kit which includes two new caps suitable for newer Ford and Vauxhall/Opal vehicles

• Heavy-duty pressure test kit
• Aluminum radiator header tank caps are color-coded for ease of use and have quick release fittings.
• Suitable for wide range of vehicle applications
• Locate system leaks from: head gasket, header tank, radiator, and heater cores
• Water pump, plugs, hoses and housings
• Heavy-duty pump unit features smooth action and large, easy-to-read, scale
• Long hose aids easy use of the gauge and quick release is fitted with pressure release valve for safe operation
• Set supplied with thermometer and packed in rugged carry-case

Applications: Alfa Romeo, Audi, BMW, Citroen, Fiat, Ford, Isuzu, Jaguar, Jeep, Lexus, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Subaru, Suzuki, Toyota, Vauxhall/Opel, Volvo, VW

Made in China

Ensure your vehicle's optimal performance with our 4-in-1 Refractometer! This hand-held optical device accurately measures antifreeze, screenwash, battery fluid, and AdBlue urea concentration.

• Automatic Temperature Compensation (ATC) for increased accuracy.
• Easy to use and calibrate for quick measurements.
• Soft rubber eyepiece and non-slip grip for comfortable handling.

Adjustable Non-contact wire tracker, EL88407
Locates Breaks along live, insulated wires & Power cords.
Adjustable Sensitivity allows tracing of wires behind walls, around switches or receptacle.
Compact, lightweight, sleek and handheld design
Complete with a durable built-in pocket clip
Easy to recognize by Audio Signal & LED indicator.
Operates by 2 pcs LR44, 1.5V Batteries. ( Included )
Length : 150 mm (L.), ABS Housing
CE aprouved
Testing range: 12 to 600 V AC

Made in Taiwan