AUTOMOTIVE SPECIALTY TOOLS

4 pcs Stud extractor socket set, 058-1022M
The extractors are the concentric roller bearing type that won't damage the thread on the stud.
They can used for stud removal and stud fitting with no damage to the thread.
Very professional.
Made from highly polished chrome vanadium steel to a professional standard for the skilled mechanic or engineer.
Sizes: 6 mm; 8 mm; 10 mm; 12 mm

Made in Taiwan

Brake Spring pliers, 210-0980-1

Features: for assemble and disassemble the springs of the brake shoes in a drum brake.
Caused Zero damage to the components.
Handle with a socket end for removing spring from anchor stud.
Handle with a grooved end for installing spring on anchor.
Jaw with an unique sunflower-shaped and swivel design allows the operator to grab the surface of the drum brake shoes firmly, and the other jaw hooks thehooking portion of the return spring. And then holding close two handles to assembly or disassemble the spring of the brake shoes.

Made in Taiwan

1/2" Dr. Profession Ratchet Handle, 317-А4006

72 teeth

With quick release

Made in Taiwan

AUDI Q7, S4 1/2" Dr.7 Teeth Brake Caliper Socket 1/2"D 14mm 2006-0014

1/2" dr.7 teeth, 14mm socket QKX3 x 50mmL

Material: CR-MO
For removal and replacement of the retaining
screws on brake caliper on Q7 and other models

Made in Taiwan

Exhaust removal pliers, 11143226

Features:
Easy separates the rubber supports from exhaust hanger brackets.
Works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.
The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

Made in Taiwan

Mercedes Benz /BMW Oil pan wrench, 846-7157

A wrench designed specifically to service the driveline fluids on most BMW and Mercedes Benz vehicles.
The 14-mm Allen end services the fill and drain plugs on the transmission and differential housing. The low-profile design allows access where restricted space does not allow the use of a conventional socket. The 17-mm box end services the oil drain plug.

BMW: Most vehicles since 1990
Mercedes Benz engine types: 102.92/93/96/98/99, 103, 104, 110.92/98/99, 112, 113, 116, 117, 119, 120, 266, 275, 285, 601, 602.91/93/94/96, 603.91/93/96/97, 604, 605, 606, 615, 616, 617.91 /95
Mercedes transmission types: 716, 717, 722, 63

Made in Taiwan

Mercedes Benz compressor belt pulley, 01125039

Special tool for using on removing / installing compressor belt.
With Special three point design for suitable using on parts of the vehicles.
Applicable: BENZ M112, M113, M272M, M273.

Made in Taiwan

Internal snap ring pliers (Long arm), 096-7011

Special design for the retaining ring in the deep hole.
The most deep size: 56 mm

Made in Taiwan

16l  Oil drip pan with nozzle, 178-M9004N

Easy and efficient collection of oil / fluids
Front and rear hand grabs
Directional spout
Rolled edges to prevent spillage

Made in Taiwan

Oil filter wrench, 209-0036

Working range: 63-102мм ( 2-1/2"-4") 

Working with ratchet handle 3/8" DR. and 1/2" DR.

Made in Taiwan

Oil filter wrench, 096-3102A

Working range: 63 - 102 mm

Working with ratchet handle 3/8" DR. and 1/2" DR.

Made in Taiwan

Ball Joint Separator 46 mm, 093-4323E
Jaw size: 46 mm

Cylinder liner extractor tool set, 031-A689

Cylinder liner puller complete with support brace.
Applicable: Wet heavy-vehicle (e.g. Mercedes Benz, MAN) cylinder liners, automobile and stationary-engine liners, and other parts may be extracted using this puller.
Capasity: Ø 60 – 160
Operation: the spindle of the counter-support brace is screwed into the clamping nut of the puller, and the puller inserted into the liner. The counter-support brace is placed on to the cylinder block. Due to the newly-developed spreading system, when the spindle is turned, all three jaws spread quickly and without difficulty, until they are firmly seated beneath the edge of the liner. Then the nut of the counter-support brace is tightened.

Made in Taiwan

Brake Retainer Spring Compressor, 031-A641201

- The tool will remove and replace brake spring washers
- The spring is quick, clearly and safely removed and replaced.
- For use on 5/8"- 7/8" diameter spring found on most newer vechicle.

Made in Taiwan

VAG with 1.6 TDi engines - Diesel injector remover, 011108019
Applicable: Engines: 1.6L CRTD diesel.
OEM Tools: T10402, T10055.
Use according to OEM instructions.
No solenoid removal is required.

Made in Taiwan