AUTOMOTIVE SPECIALTY TOOLS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Hydraulic Truck Spring Eye Bush Tool Set (12 Tonne), 51426
Hydraulic Truck Spring Eye Bush Tool Set (12 Tonne), 51426
Heavy-duty professional tool set featuring a 12-tonne hydraulic cylinder for efficient removal and installation of truck spring eye bushes.
The kit includes multiple adapters and press discs to ensure precise work without damaging surrounding components.
Ideal for automotive workshops, mechanics, and maintenance professionals.
Made in China
80-120 mm Heavy Duty 3-Jaw Oil Filter Wrench, 51423
80-120 mm Heavy Duty 3-Jaw Oil Filter Wrench, 51423
Professional heavy-duty 3-jaw wrench designed for easy removal and installation of oil filters ranging from 80mm to 120mm.
Made in China
8 Pcs Locking Lug Nut Socket Set, 51417
8 Pcs Locking Lug Nut Socket Set, 51417
Professional 8-piece set designed for easy removal of locking lug nuts.
Manufactured from heavy-duty chrome molybdenum (Cr-Mo) steel for maximum durability.
Made in China
Engine Timing Tool Set - VAG 1.5 TSI (EA211 EVO), 51280
Engine Timing Tool Set - VAG 1.5 TSI (EA211 EVO), 51280
The professional tool kit is precisely designed to align, set, and check the camshaft timing on modern VAG 4-cylinder 1.5 TSI (EA211 EVO) petrol engines.
The key advantage of this set is that it allows for accurate timing without the need for computer-based diagnostic tools.
Made in China
3/8" Go-Through Socket Set, 15 pieces, 51416
3/8" Go-Through Socket Set, 15 pieces, 51416
Professional 15-piece set featuring a go-through ratchet and 3/8" sockets, ideal for working on long studs and bolts where standard sockets cannot be used.
Made in China
Long Reach Hose Clamp Pliers - 90° Angled, 310mm, 51414
Professional 310mm long reach pliers with a 90° angled head, specifically designed to remove and install self-tightening hose clamps in deep and confined engine spaces.
Long Reach Angled Hose Clamp Pliers - 45° Offset, 13" (330mm), 51413
Professional-grade long-reach pliers with 45° angled jaws for removing and installing spring-type hose clamps. Specifically designed for extreme access in cramped engine compartments.
Long Reach Hose Clamp Pliers - Straight, (340mm), 51412
Professional-grade straight long-reach pliers designed for removing and installing spring-type hose clamps in hard-to-access areas. Features a 340mm length for maximum reach in tight engine bays.
1/2" Drive Oxygen Sensor Socket 24mm (Narrow Slot), 51411
Professional 24mm deep socket with a narrow lateral slot, designed for the safe removal and installation of oxygen sensors. The narrow slot design provides maximum socket strength while protecting the sensor wiring.
24mm 1/2" Dr. Oxygen Sensor Socket (Wide Slot), 51410
Professional 24mm deep socket with a 1/2" drive, specifically designed for the removal and installation of oxygen (lambda) sensors. The wide lateral slot allows the socket to fit over the sensor's wiring without causing damage.
41mm 8-point Fork Cap Socket for Showa Big Piston Forks, 51382
Description: Precision 41mm 8-point low-profile socket for servicing motorcycle front fork caps. Ideal for Big Piston Forks (BPF) by Showa. Made from durable materials to ensure a perfect fit without rounding the edges of the aluminum caps.
Purpose: Essential tool for servicing modern sportbike forks. Designed specifically for the high-torque requirements of Big Piston Fork (BPF) caps while maintaining a soft touch on the finished aluminum surfaces.
38mm 8-point Fork Cap Socket for Showa SDBV,51381
Description: Specialized 38mm 8-point (octagon) socket designed for the safe removal and installation of front fork caps. Specifically engineered for Showa SDBV forks found on motorcycles like the Honda NC750. Prevents damage to delicate aluminum caps.
Purpose: Used for removing and installing the top fork caps on motorcycle suspension. The 8-point design ensures a precise fit on low-profile aluminum caps, preventing costly damage and scratches during maintenance.
60-120mm Self-Adjusting Oil Filter Pliers, 51360
These self-adjusting oil filter pliers are a versatile tool designed for quick and easy removal and installation of various sizes of oil filters. Thanks to their intelligent design, the jaws automatically adapt to the filter size within the 60 mm to 120 mm range, eliminating the need for manual adjustment or using multiple tools. They feature serrated jaws for a secure grip and ergonomic handles with plastic coating for comfortable operation.
Ford 1.0/1.1 EcoBoost & 2.0 EcoBlue/TDCi - Torque Multiplier Set, 51357
Ford 1.0/1.1 EcoBoost & 2.0 EcoBlue/TDCi - Torque Multiplier Set, 51357
EcoBlue 2.0 TDCi - Cylinder Head Bolt Torque Multiplier Stand, 51356
- Purpose: Ensures correct torque and angle application on cylinder head bolts when paired with a suitable torque multiplier (e.g., OEM 303-1611).
- Engine Compatibility: All 2.0L EcoBlue diesel engines.
- Made in China
