AUTOMOTIVE SPECIALTY TOOLS

Oil filter wrench Hyundai & Kia 2.0L; 2.2L, 50518

Features: For Hyundai & Kia vehicles fitted with 2L or 2.2L diesel R-engines.
Applicable:
Hyundai: IX35 (from 2009) & Santa Fe/Maxcruz (from 2012).
Kia: Sportage (R) (from 2011) , Sorento (R) (from 2010), Carnival/Sedona (from 2010).
1/2"D x 6pt profile.
42 mm across flats.

Made in China

3 Pcs 1/2" Dr. Damaged Wheel Nut Remover sockets, 50496

Deep sockets with special profile grips to allow loosening of damaged or rounded bolts or nuts on car wheels.
Material: Cr-Mo
Size: 17, 19, 21mm

Made in China

3 Jaw Internal & External Puller Set, 50153

Dimensions:
Internal bearing extractor: 15 mm - 30 mm
Inner bearing extractor: 30 mm - 80 mm
External bearing extractor: 15 mm - 80 mm.
Locking the nut to open the jaws and secure the bearing. Then use the reverse hammer to pull the bearing.

Made in China

Spark Plug Puller Set 4pc – VAG, 50144

Description：       

OEM No:T10095 A; T10166; T40039; T10094 A

For safe assembly and disassembly of spark plug connectors and ignition coils with power output stage.
Prevents damage to ignition coils whilst allowing faster removal 4 Piece WW Spark Puller Set
Ignition Coil Pullers for use on Volkswagen and Audi vehicles fitted with direct ignition engines.
Application:       
OEM No. T10095 A: For VW Phaeton from 2003, Golf from 1998, Bora from 1999 Sharan from 1996, Passat from 1997, 6-cyl. Injection engine (4-valve), 5-cylinder injection engine, Eos (from 2006) 3.2L, Touareg 6-cylinder (from 2003), AUDI TT 3.2L (1999-2007), A3 3.2L (from 2004)
OEM No. T10166: For Passat from 1997, Phaeton from 2003, 8-cyl. (W8) and 12-cylinder injection engines
OEM No. T10094 A: For VW Polo, Fox 1.2L, Golf 1.4L, 1.6L, Golf Plus 1.4L (from 2005), Caddy 1.4L, Bora 1.4L, 1.6L, Beetle 1.4L (petrol from 2003) , Scirocco 1.4L (from 2009), Lupo 4-cylinder direct injection (from 1999), Passat, Touran 1.6L, Phaeton, T4
OEM No. T40039: For VW and Audi 2.0L direct injection, Golf (from 2004), Touran (from 2004), Passat (from 2006), Eos (from 2006), Polo (from 2002) 4 cylinder 5V, Scirocco (from 2009) 1.8L, 2.0L, Tiguan (from 2006) 1.8L, 2.0L, Phaeton (from 2003) 8 cylinder, Audi A3 2.0L (from 2004), A4 2.0L (from 2002), A5 3.2L, 4.2L (from 2008), A6 3.2L (from 2005), A8 3.2L, 4.2L, 5.2L (from 2003), TT 1.8L, 2.0L (from 2007), R8 4.2L (from 2008), Q5 2.0L, 3.2L (from 2008), Q7 3.6L, 4.2L (from 2007), Skoda Fabia

Made in China

2-Jaw Gear puller 80х100, 50141D

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 80 mm

Made in China

2-Jaw Gear puller 120х100, 50141A

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 120 mm

Made in China

2-Jaw Gear puller 150х150, 50141B

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 150 mm

Made in China

2-Jaw Gear puller 200х150, 50141C

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 200 mm

Made in China

5 pcs Inner bearing puller, 50140

The kit consists of a slide hammer (2 Lb-980 g) and a set of extractors of various sizes needed to pulling internal bearings.
Capacity: 3/8 "(10mm) - 1-1 / 4" (32mm)
Contents:
Slide hammer - 980 g
Bearing extractor: 3/8 "to 1/2" (10 mm-14 mm)
Bearing extractor: 9/16 "to 11/16" (15mm-19mm)
Bearing extractor: 5/8 "to 1" (18mm-25mm)
Bearing extractor: 1 "to 1-1 / 4" (25mm-32mm)
Come with a carry case.

Made in China

7 pcs air conditioning A/C fuel line disconnect tool set, 50129

Features: Easily disconnects air conditioning lines and quick connect fuel lines 
Specification:
- Simple assembly and disassembly of quick connectors for automotive air conditioning duct and fuel pipelines, easily disconnected;
- Practical, easy, and affordable;
Weight”116 g 
Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"

Made in China

Cylinder liner extractor tool set, 031-A689

Cylinder liner puller complete with support brace.
Applicable: Wet heavy-vehicle (e.g. Mercedes Benz, MAN) cylinder liners, automobile and stationary-engine liners, and other parts may be extracted using this puller.
Capasity: Ø 60 – 160
Operation: the spindle of the counter-support brace is screwed into the clamping nut of the puller, and the puller inserted into the liner. The counter-support brace is placed on to the cylinder block. Due to the newly-developed spreading system, when the spindle is turned, all three jaws spread quickly and without difficulty, until they are firmly seated beneath the edge of the liner. Then the nut of the counter-support brace is tightened.

Made in Taiwan

BMW DCT Dual Clutch Remover and Installer tool, 50863

Used to remove and install clutches on BMW 7 speed DCT (Dual Clutch Transmission) transmissions in BMW vehicles.
Application range: BMW GS7D36SG (DKG) transmission.
135i E82 / E88 2011-2013,
335is E92 / E93 2011-2013,
M3 E90 / E92 / E93 M-DCT 2008-2013,
Z4 sDrive35i E89 2009-2014 & Z4 sDrive35is E89 2011-2014.

OEM Code: 230 400

Wheel bearing tools – 85 mm, 50432A

The hub bearing removal and installation kit with integrated flange serves for a seamless and quick replacement of the damaged generation bearing - 2 - 85 mm on all Volkswagen vehicles (Touareg & T5 with 16 ”wheels/ suspension, Transporter, Multivan). The convenience of this kit is that it can be used in a situation without having to remove the hub damper from the car. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Feature:
All tools in the kit are heat treated for strength and durability.
With this tool kit you can easily remove the bearings and other components.
These bearings are lightweight with a built-in flange.
They are also preloaded with a retaining bracelet that secures the bearing to the hub housing.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.

https://www.youtube.com/watch?v=pequSdvAJU0&feature=youtu.be

Contents:
5 Push pins
1 Pressure plate with 5 holes
1 Pair of half shells for dismantling
1 Pair of half shells for installation
1 Dismantling plate
1 Installation plate
L Type lever

3/8" Dr. 15 mm Universal long nut driver (joint type) with T-handle, RICO

Blade: 400 mm

Width: 200 mm

Material: Cr-V