AUTOMOTIVE SPECIALTY TOOLS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
BMW DCT Dual Clutch Remover and Installer tool, 50863
BMW DCT Dual Clutch Remover and Installer tool, 50863
Used to remove and install clutches on BMW 7 speed DCT (Dual Clutch Transmission) transmissions in BMW vehicles.
Application range: BMW GS7D36SG (DKG) transmission.
135i E82 / E88 2011-2013,
335is E92 / E93 2011-2013,
M3 E90 / E92 / E93 M-DCT 2008-2013,
Z4 sDrive35i E89 2009-2014 & Z4 sDrive35is E89 2011-2014.
OEM Code: 230 400
Wheel bearing tools – 85 mm, 50432A
Wheel bearing tools – 85 mm, 50432A
The hub bearing removal and installation kit with integrated flange serves for a seamless and quick replacement of the damaged generation bearing - 2 - 85 mm on all Volkswagen vehicles (Touareg & T5 with 16 ”wheels/ suspension, Transporter, Multivan). The convenience of this kit is that it can be used in a situation without having to remove the hub damper from the car. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Feature:
All tools in the kit are heat treated for strength and durability.
With this tool kit you can easily remove the bearings and other components.
These bearings are lightweight with a built-in flange.
They are also preloaded with a retaining bracelet that secures the bearing to the hub housing.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.
https://www.youtube.com/watch?v=pequSdvAJU0&feature=youtu.be
Contents:
5 Push pins
1 Pressure plate with 5 holes
1 Pair of half shells for dismantling
1 Pair of half shells for installation
1 Dismantling plate
1 Installation plate
L Type lever
3/8" Dr. 12 mm Universal long nut driver (joint type) with T-handle, RICO
3/8" Dr. 12 mm Universal long nut driver (joint type) with T-handle, RICO
Blade: 340 mm
Width: 160 mm
Material: Cr-V
3/8" Dr. 15 mm Universal long nut driver (joint type) with T-handle, RICO
3/8" Dr. 15 mm Universal long nut driver (joint type) with T-handle, RICO
Blade: 400 mm
Width: 200 mm
Material: Cr-V
3/8" Dr. 14 mm Universal long nut driver (joint type) with T-handle, RICO
3/8" Dr. 14 mm Universal long nut driver (joint type) with T-handle, RICO
Blade: 400 mm
Width: 175 mm
Material: Cr-V
3/8" Dr. 12 mm Universal long nut driver (joint type) with T-handle
3/8" Dr. 12 mm Universal long nut driver (joint type) with T-handle
Blade: 360 mm
Width: 160 mm
Material: Cr-V
3/8" Dr. 11 mm Universal long nut driver (joint type) with T-handle RICO
3/8" Dr. 11 mm Universal long nut driver (joint type) with T-handle, RICO
Blade: 360 mm
Width: 160 mm
Material: Cr-V
3/8" Dr. 10 mm Universal long nut driver (joint type) with T-handle, 784345010U
3/8" Dr. 10 mm Universal long nut driver (joint type) with T-handle, 784345010U
Blade: 450 mm
Width: 200 mm
Material: Cr-V
Origin: Force, Taiwan
Long nose locking pliers 6" 615150
Long nose locking pliers 6" 615150
L- 150mm
Made in : Pard, Taiwan
Brake Retainer Spring Compressor, 031-A641201
Introducing the Brake Retainer Spring Compressor, 031-A641201 – your go-to tool for quick, clear, and safe brake maintenance!
This tool is designed to effortlessly remove and replace brake spring washers on most newer vehicles with 5/8"-7/8" diameter springs. Made with precision in Taiwan, this compressor ensures reliability and efficiency for all your brake servicing needs.
- Effortless Removal & Replacement: Quickly swap out brake spring washers.
- Wide Compatibility: Suitable for 5/8"-7/8" diameter springs.
- Safe Operation: Designed for clear and safe spring handling.
A/C spring lock coupling tools, 50122
A/C spring lock coupling tools, 50122
Features:
- for 3/8", 1/2", 5/8", 3/4" couplers;
- Designed for separating air conditioning refrigerant pressure lines on these vehicles;
- Used for Ford, Chrysler and Jeep vehicles
Made in: China
Flexible 3-Claw Pick-up Tool 45cm, 88901
Flexible 3-Claw Pick-up Tool 45cm, 88901
Shank diameter: Ø6mm
Shank length: 480mm
Overall tool length: 605mm
Made in Force, Taiwan
7" Locking pliers 614175
7" Locking pliers 614175
L-175 mm (7")
Made in Pard, Taiwan
Adjustable locking pliers 3 - 46 mm, 65202
Adjustable locking pliers 3 - 46 mm, 65202
For clamping plumbing and worn screws
Can be adjusted for clamping small to large screws
Smooth and fast screw clamping
Material: CR-Mo
Jaw adjustment: 3 - 46 mm
Lenght: 9" (225 mm)
Weight: 400 g
VAG with 1.6 TDi engines - Diesel injector remover, 011108019
VAG with 1.6 TDi engines - Diesel injector remover, 011108019
Applicable: Engines: 1.6L CRTD diesel.
OEM Tools: T10402, T10055.
Use according to OEM instructions.
No solenoid removal is required.
Made in Taiwan
