AUTOMOTIVE SPECIALTY TOOLS

Mini Tube Cutter 3 – 25 mm, 022302ACM

Designed for cutting Copper and Aluminium tubing. Specifically suited to small bore tubing. 3 – 25 mm o.d.

• Speed and efficiency - fast cuts
• Quickly adjusts to the rquired cutting position
• Convenience - great in tight spaces

Made in Taiwan

3 pcs 1/2" Dr. 6-pt. Wheel nut hydraulic torsion impact socket

Wheel nut wrench, 681B400

- 17; 19; 21; 22 mm with 1/2"Dr. Adaptor (400 mmL)
- Material: Crome vanadium alloy steel;
- For most car wheel nut in metric;
- Polished, chrome plated.

Made in Force, Taiwan

3/4"Dr. 12-pt. Flank socket 65 mm, 50469

Specially for the hub nuts on transit vans.

Size: 65 mm

Material: Cr-V

Made in China

1/2" Dr. Extendable tyre wrench, P0001

Suitable for the development of the tires of the vehicle tires.
Minimum overall length: 380 mm
Stroke: 130 mm
Maximum length: 510 mm

4 pcs Stud extractor socket set, 50922
The extractors are the concentric roller bearing type that won't damage the thread on the stud.
They can used for stud removal and stud fitting with no damage to the thread.
Very professional.
Made from highly polished chrome vanadium steel to a professional standard for the skilled mechanic or engineer.
Sizes: 6 mm; 8 mm; 10 mm; 12 mm

Made in China

VW, AUDI Head bolt socket, 846-7107

Features:
- 125 mm Overal length for restricted areas
- S2 10 mm Polydrive 6-pt. bits (RIBE 10 mm)
- 1/2"Dr. Cr-V Socket
- Not for impact use.

Applicable: Fits 1998 and later VW/Audi 5 Valve engines (V-6 and 4 cylinder)

Made in Taiwan

Benz strut nut socket, 780-9002\

Features:
Specifically designed for Mercedes-Benz C Class W203
Applicable:
Mercedes-Benz C Class 2000-2008 C203 front suspension strut top nuts (Shock absorber piston rod top nut).
Also fits W209 CLK 2003-2008
Used with a 7 mm Hex key to hold strut in place whilst tightening
22 mm Hex drive
Selected steel

Made in Taiwan

BMW Common rail injector set, 50630

Special tool pulling out stuck injectors
with BMW Diesel Engine Code with M47TU / M 47T2 / M57 / M57TU / M 57T2
The support on the cylinder head enables high pull-off
disassembly of the cylinder head is therefore not necessary
The particular form of puller allows safe and precise extraction, especially in very tight injectors / injectors.
Contents
- 2 support feet 115 mm
- 2 support feet 140 mm
- Supporting bridge with ball bearing
- Spindle M16 with unilateral M17 thread for mounting in the injector
- 29mm socket wrench for removing the electrical unit
- Allen key for removing the injector needle
For the following BMW - types
In contrast to solutions with impact hammer, the injectors are removed with this tool by even train and in the optimum position for installation position.
E38: 730 d
E87: 118 d / 120 d
E46: 318 d / 320 d / 330 d
E39: 520 d / 525 d / 530 d
E60/E61: 520 d / 525 d / 525 xd / 530 d / 530 xd / 535 d
E63/E64: 635 d ( 04-10 )
E38/E65/E66: 730 d
E83: X3 2.0 d / 3.0 d
E53/E70: X5 3.0 d
E90/E91: 316 d / 320 d
E90/E91/E92/E93: 325 d ( 06-10 ), 330 d / xd ( 98-08 ), 335 d
This also applies to same engine in a Land Rover - types such as
Range Rover: 2.5 DT   Year 1994 - 2002
Range Rover: 3.0 TD6   2002 - 2006
Freelander: 2.0 TD4   2002 - 2006...

Mechanic's stethoscope, 50235

Features:

• This mechanics sonar scope helps isolate engine problems by letting you hear inside engine.
• Quality chromed steel construction with soft PVC hose and probe.
• There are two ends.
• The long metal adapter is for detecting noisy in hard-to-access areas
• The short adapter helps to capture noisy space.

2 pcs Vacuum cup valve grinder, 50104
For hand use, grinding flat head, unslotted valves.
Suitable for small and large vehicles.
Hardwood handles for easy hand lapping of engine valves.
• Synthetic rubber vacuum cups are resistant to oil, grease, gasoline and are replaceable.
• 1-1/8” & 1-3/8” dia. cups.
• 5/8” & 13/16” dia. cups.

VW & AUDI Strut nut socket, 210-0155-AT

Features:
Suitable for the disassemble and installation of top shock retaining nut.
Used with 22mm spanner wrench.
Material: Heat treated and tempered chrome molybdenum steel (CR-MO)
Overall Length: 44mm
Applications: Most Audi & VW front wheel drive vehicles.

Made in Taiwan

CV Joint clamp banding tool with cutter, 096-81433

Tool is easy removed by sliding sideways after winding has been completed.

Use to install and tighten the "band-it" or strap style clamps on CV joint boots or on power steering rack and pinion steering gear boots.
Once installed into the tool tighten the band by turning the handle on the tool;
Use a socket or wrench on the handle to torque the band to OE specifications.
When the boot clamp has been tightened to specs cut the band to the correct length by flipping the lever (at the front of the tool) forward.
Features:
CV joint boot clamp wrench securely fastens band-it style free-end clamps
Roll band clips and pre-formed CV boot clamps
Use by turning the winding mandrel with a 1/2-inch socket or wrench
Measures 11-1/2 inches long
Works on All CV Boot Clamps, ATV,  UTV and some automotive applications.

36 mm Viscous fan hub spanner, 058-6227A

Features:
For disassembly of FORD and GM (Opel / Vauxhall) viscous hub fins.
Cranked design for easy access.
Made of pressed, tempered, hardened and chromed steel with PVC handle.

• Size: 36mm.
• Lengh: 270 mm

Applicable:
Ford Granada 2.4 & 2.9; GM Carlton, Manta & Senator

Made in Taiwan

T-handle disclosed tire repair tool, 766-0217

Applicable: For steel belted redial tire.

Made in Taiwan