AUTOMOTIVE SPECIALTY TOOLS

Bearing Puller Long Reach, 210-0858

3 position external jaws adjustable to 6, 8 and 10 inch length reach.
Screw extension extends screw length by 2-1/2 inch.
Forcing screw has 14 mm hex head for use with ratchet. 3/8 to 2 inch width bearing.
Reach: 300mm
Spread: 10~50mm
For long reach pulling jobs
Self Centering
Manufactured from drop forged alloy steel

Made in Taiwan

7,5 l Transmission oil filling system with 8 pcs adaptors set, 027-0601

Capacity: 7.5l
Large transparent tank to see through fluid level.
Viscosity range: up to SAE 140
Application: VW, Audi, Mini cooper, BMW, Ford, Nissan, Porsche, Mercedes, etc.

Made in Taiwan

Universal ball joint separator 22 mm, 211-0163

This tool is used to separate the ball joint from the spindle support arm

Applicable:  Audi, BMW, Ford, Honda, Mercedes-Benz, Nissan, Opel, Renault, Seat, Skoda, Toyota, Volkswagen and Volvo.
Adjustable for Different Size Ball Joints
1-1/8" & 2-1/8" (30 - 56 mm) Maximum Opening Capacity
Lifetime limited warranty

 

3 Jaws Gear puller 3”, 50742C

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 6”
Capacity: 60 – 152 mm

Made in: China

3 Jaws Gear puller 4”, 50742B

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 4”
Capacity: 50 – 102 mm

3 Jaws Gear puller 3”, 50742A

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 3”
Capacity: 40 – 76 mm

Engine Timing Tool Set VW Audi Seat Skoda 1.8 2.0 TSI; TFSI4V, 50826

Models:
AUDI: A4, A5, A6, Q3, Q5, TT
SEAT: Alhambra, Altea/Altea XL, Exeo, Leon, Toledo
SKODA: Octavia II, Superb II, Yeti
VW: Eos, Golf VI, Passat/Passat CC, Sharan, Beetle, Scirocco, Tiguan

Engines:
1.8 CDAA, CDAB, CDHA, CDHB, CGYA, CJEB
2.0 CCZA, CCZB, CCZC, CCZD, CDNB, CDNC, CDND, CESA, CETA, CFKA, CPSA

Еngine timing tool set for VW, Audi, Skoda VAG 1.2FSI/TFSI; 1.4/1.6FSI; 1.4TSI, 50816

Set Include:
Crankshaft Locking Pin,Camshaft Locking Tool for 1.2 TSi ,1.2 TFSi,Camshaft Alignment Tool,TDC Indicator,Tensioner Pin,Timing Cover Alignment,Pins (2) (Guide Pins),Dial Test Indicator .
Application:
Audi: A1, A3 , A3 Sportback, A3 Cabriolet 1.2 1.4 TFSI
Seat: 1.4 TSI Alhambra, 1.2 1.4 TSI Altea/Altea XL, 1.2 1.4 TSI Ibiza mk5/Cordoba, 1.2 1.4 TSI Leon, 1.2 1.4 TSI Toledo
Skoda: 1.2 1.4 TSI Fabia II , 1.2 .4 1.4 TSI Octavia II /Octavia Combi, 1.2 1.4 TSI Rapid Spaceback/ Rapaid, 1.2 TSI Roomster, 1.2 TSI Roomster Praktik , 1.4 TSI Superb II, 1.2 1.4 TSI Yeti
VW:
1.2 1.4 TSI Beetle
1.2 1.4 TSI Caddy mk3/Caddy Maxi
1.4 TSI 1.6 FSI Eos
1.4 TSI 1.6 FSI Golf V, 1.2 1.4 TSI Golf VI, 1.2 1.4 TSI 1.6 FSI Golf Plus, Golf Cabriolet, Golf Variant
1.4 TSI 1.6 FSI Jetta mk3, 1.2 1.4 TSI Jetta mk4
1.4 TSI 1.6 FSI Passat (3C2, 3C5) 2005-2010, 1.4 TSI Passat (362,365) 2010-2014
1.2 TSI Polo (6R , 6C,) 2009-,Polo (6R) 2010-, 1.4 FSI Polo (9N3) 2005-2006
1.4 TSI Scirocco
1.4 TSI Sharan
1.4 TSI Tiguan (2010-), 1.4 TSI 1.6 FSI Touran (2003-2010).
Engine Codes:
1.2 TSi, 1.2 TFSI - CBZA, CBZB, CBZC
1.4FSi - AXU, BKG, BLN
1.4 TSi, 1.4TFSi - BLG, BMY, BWK, CAVA, CAVB, CAVC, CAVD, CAVE, CAVF, CAXA, CAXC, CDGA, CSMA
1.6FSi - BAG, BLF, BLP, BTS.

OEM#: T10170, T10171, T40011, T10340, T10341, T10414.

Made in China

•  

Petrol engine twin camshaft timing kit BMW 1.6 N40/N45/N45T, 50659

This kit for 1.6 BMW, 4 cylinder twin camshaft 16V, chain driven petrol engines with vanos units on the inlet and exhaust camshafts.

Contents:
 Vanos alignment plate,
 Camshaft setting plate (inlet),
 Camshaft setting plate (exhaust),
 Flywheel locking pin,timing chain
 Tensioner pre-load tool, camshaft setting
 Plate securing screw.

Works with Models:E81/E87: 116I,  E46/E90: 316I, E46: 316CI, E90: 320si
Works with Gas Petrol engines: N40, N45 B16, N45 B20, N45T

Model Years:
2001–2004 --- 1.6 L N40 Engine
2004–2011 --- 1.6/2.0 L N45 Engine
2003 -2009 --- 116i -1.6 E81 / E87
2001- 2008 --- 316 i - 1.6 E46 / E90
2001 - 2006 --- 316 Ci - 1.6 E46
2001 - 2005 --- 316 ti - 1.6 E46

Will also work with these Chain drive makes BMW, Mini, Citroen, Peugeot

Code: 52074

Porsche Cayenne 4.5L, 4.8L, Audi Q7 Camshaft Timing Tool Set, 50652 This comprehensive set of tools enables to correct engine timing to be made when replacing the timing belt. Set of two fixtures necessary to set camshaft timing on 2002 – 2009 Porsche Cayenne V8 engines. This tooling is necessary to establish TDC timing any time the cam timing is disturbed for servicing of the cams, cylinder-head, timing chain or variable valve-timing cam phasers.

Diesel injector copper washer remover install tool, 50629
Size: inner hole 7mm

•     Designed for use on most Common Rail CDI injectors to remove copper washer sealing the base of the injector.
•     Suits most European cars using Bosch CDI fuel injection
•     Handy screw thread and expanding jaw design
•     Remove and install the copper washers on diesel injectors quickly and effectively with this special tool.
•     The reach of 230mm long is designed to install copper washers on deep seated injectors.
•     For removing and installing the copper wires on diesel injector.
•     Quick & effective. Reach - 230mm.

    For deep seated injectors.
    Manufactured from Chrome Vanadium...

Cam belt tension gauge, 50607

Suitable for belts of varying thickness.
Dual scales allows the measurement to be taken from either side of the tool.
Knurled knob measurement.
Lenght (approx): 85 mm - 100 mm
Wight: 80 mm

Made in China

Universal Tie rod wrench, 50444

Features:
Designed specifically for the removal of the direction of the steering rod.
The master tie rod tools easily replace inner tie rod ends.
Applicable to various vehicles: Mercedes Benz, BMW, Toyota, Honda, Ford,  Nissan , etc.

Engine Timing Tool Set BMW Mini, PSA 1.4 & 1.6, Citroen, Peugeot, 780-8162

Suitable for timing 1.4 & 1.6 Valvetronic direct injection petrol, chain drive engines, fitted in BMW Mini, Citroen and Peugeot vehicles.
Content:

• Camshaft Locking Tool - Inlet
• Camshaft Locking Tool - Exhaust
• Camshaft Alignment Clamp
• Crankshaft Setting Pin
• M6 Setscrews (4)
• Chain tensioner

Models:

• Mini One Coupe R56 (2006-2010)
• Mini Cooper Coupe R56 (2006-2010)
• Mini Cooper HB R55 (2007-2010)
• Citroën C4 (2008-2009)
• Citroën C4 Picasso (2008-2009)
• Peugeot 207 (2006-2010)
• Peugeot 207CC (2007-2010)
• Peugeot 308 (2001-2010)
• Peugeot 3008 (2009-2012)
• Peugeot 5008 (2009-2012)

 Engine Codes:

• N12
• N14
• EP3 (8FS)
• EP3C (8FR)
• EP6 (5FW)
• EP6C (5FS)
• EP6DT (5FT)
• EP6DT (5FX)
• EP6CDT (5FV)
• EP6DTS (5FY)

Code: 52046

Mede in Taiwan

•  

Petrol engine timing locking tool set for BMW N42; N46, 50387

Contents:

• Intake & Exhaust Camshaft locking device with fixing screws

• Crankshaft Flywheel TDC Locking pin

• Rigid Chain Tensioner Tool

• OEM tools: 11 5 120, 11 9 190, 11 9 270, 11 9 291, 11 9 292, 11 9 293, 11 9 340, 11 9 350

Applications

• BMW E87 118i, 120i N46 engine

• BMW E46 316i, 316ti, 318ti N42 engine

• BMW E90/E91 318i, 320i, N46 engine

• BMW E85 Z4 2, 0l-N46 engine

Engine Codes

• N42 / N46

• B18 / B18A

• B20 / B20A / B20B