AUTOMOTIVE SPECIALTY TOOLS

Diesel Injector extractor set, 50633

For removal of diesel injectors
Various adaptors make the kit suitable for most diesel injectors
Includes also the following components:
M14 x 1.5 for Delphi adaptor
M17 x 1 for Bosch adaptor
M20 x 1 for Denso adaptor
M25 x 1 for Siemens adaptor
M27 x 1 for Siemens adaptor
M27 x 1 for Bosch injector nozzle adaptor

Puller with M14 x 1.5P

3 x different slide hammers:
1.6 kg, 160 mm length
2.7 kg, 460 mm length
5.1 kg, 600 mm length

2 x pulling claws with fork opening:
13.7 x 18 mm, 105 mm length
12.7 x 19 mm, 130 mm length

5 x  Oxygen Sensor slotted 6-pt 1/2" sockets, 100 mm length sizes 25 - 27 - 28 - 29 - 30 mm

Injector extractor, sleeve design, with shells outer diameter 35 mm, internal diameter 29 mm, M17 x 1.0 spindle
Pulling adapter with external thread M27 x 1.0 (3pcs) and M25 x 1.0
Pulling adapter with internal thread M27 x 1.0 (3pcs)
Sliding hammer adapter for inner, outer and claw extractor.

Made in China

14 Pcs Injection Puller Tool Bosch, Delphi, Denso and Siemens Diesel Injector Remover, 50348

Application:

Suitable for the fast and reliable removal of Bosch, Delphi, Denso and Siemens diesel Injectors.

Includes:

Comprehensive set of 1/2in.Dr Injector Sockets - 25, 27, 29, 30 mm

7 Injector Adaptors and Slide Hammer

Blow mold case for storage

Contains:

Impact Hammer: 3.6 kg

Overall length (. M handle) slide hammer: 510 mm

- Length of the handle: 110 mm

- Ball joint adapter

- Adapter: M14 x 1.5 for Delphi

- Adapter: M17 x 1 for Bosch

- Adapter: M20 x 1 for Denso

- Adapter: M25 x 1 for Siemens

- Adapter: M27 x 1 for Siemens

- Adapter: M27 x 1 for Bosch

- 4 slotted 6-point socket wrench inserts ( 100 mm long) for electrical unit: 25 - 27 to 29 - 30mm

- 10 mm hex bit application, 1/2 "drive

Made in China

5 pcs Trim fastener and molding removal set, 50241

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

Windshield Removal Tool Set, 50220

This universal kit includes all of the specialised tools required to safely and quickly remove windshields from a wide variety of vehicles.
Item is supplied with a rubber gasket knife, cutting wire, two (2) handles, wire feeder tool, trim pad remover and molding release tool.

Set includes:

- Wire: Three strong galvanised steel wires braided to form one wire
- 2 pcs Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
- Windshield removal tool: Cuts the vinyl adhesive compound around the windshield.
- Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield
- Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.
1PC stainless steel wire with reel.
2PCS Wire gripping handles.
1PC Windshield removal tool
1PC Wire feeder tool
1PC Trim pad remover
1PC Windshield molding release tool

Made in China

Bearing separator 105 - 150 mm, 50132-4

Capacity: 105 - 150 mm
Bolt size: Ø 19 mm, 260 mm
Bolt thread: 3/4" x 16 UNF
Body thread: 5/8" x 11 UNC
Drop forged
Chrome finish

Bearing separator 75 – 105 mm, 50132-3

Bearing separator 50 - 75 mm, 50132-2

Capacity:2" 1/4"- 3 1/2". (50mm x 75mm)
Bolt 12.7 x 135 mm, thread 1/2" x 20UNF
Body thread 3/8" x 16UNC
HRC 38-45°
Forged
Chrome plated

Bearing separator 30-50 mm, 50132-1

-  Capacity: 30mm x 50mm  (1-1/4" to 2-1/4")
-  Bolt 9.5 x 125 mm, thread 3/8" x 24UNF
-  Body thread 3/8" x 16UNC
-  HRC 42-45°
-  Forged
-  Chrome plated

Labor Saving wrench, 50216

Labor Saving wrench adopt the highly effective and variable speed as a main drive, which function is small volume, light weight, Due to the big variable ratio, the less input power will come into being more output wrest distance, The product select high-grade alloy steel and the superior craft of heart treatment, firm and durable, high effective and saving, the appearance of using spray polishing, and have a good feeling. This products are used in kind of heavy-duty truck tire widely, and it is the necessary tool of auto repairman and the handy tool driver friends.

The biggest security output torque - 3800N.M.
Total length: 310 mm
Torque: 3800 Nm
Gear rate: 1:58
Impact socket: 32 mm; 33 mm

Made in China

Overhead valve spring compressor, 50109

Description: This overhead valve spring compressor is ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompressing the tool then remove spring. It features a reversible jaw / adaptor and automatic cam-action locking to a re-determined setting.
Specifications:
Easy to operate
Cam action level design for secure valve spring locking into the tool
Allow valve springs and valve stem oil seals to be replaced with the cylinder head
Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications
For use on a wide range of OHV, OHC and CHV engines.
Not suitable for use on engines with deep seated valves

Made in China

Draper Bearing, Seal and Bush Insertion/Extraction Kit (26 piece), 50092A

Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:

1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle.

Made in China

Draper Bearing, Seal and Bush Insertion/Extraction Kit (27 piece), 50092

Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:

1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle, 1 x M18 pulling spindle.

The set is in case.

Made in China

Universal ball joint puller, automobile, 23 mm, 50049

Specification:
External clamping width: 23 mm
Clamping depth: 65 mm
Width: 100 mm
Spindle length: 35 mm
Thread dimension: M14 x 1.5
Width across flats: 19 mm

Applicable:
For easy ejection of ball joint bolts, particularly for many cars from the following manufacturers: Audi, BMW, Fiat, Ford, Daimler-Chrysler, Opel/Vauxhall, Nissan, Toyota, VW, Volvo.

10 pcs Radio removal tool set 910C1

Outer Tie Rod Remover 62814

• Two adjustable jaws special designed for removing most models of outer tie rod
• Material: SCM420 Hardened 42°
• Handles up to 5 tons of knuckle twisting force
• Jaw reach is 2-1/4" (57 mm) with a spread of 2-1/2" (64 mm)
• Jaws, once tightened, won't slip on the knuckle
• Can be used to separate lower ball joints on import FWD vehicles

Made in Force, Taiwan