AUTOMOTIVE SPECIALTY TOOLS

Mechanic's stethoscope, 812-0201

Locates source of engine niose;
Quickly listen for trouble by tracing sound of flowing water, oil gas or steam;
Identify piston slap, wop gears, faulty valves, water pump, failute damaged gaskets and effective bearings;
Handle is snockproof;
Disassembles for storage.

3 pcs Bearing separator, 160-9315

Equal pulling force diatributed as 3 support points
FLEXIBLE SPREAD FROM 35 mm ~105 mm
Made from SCM415 material
Bolt size: 1/2" х 20Т х L135 mm
Made in Taiwan

Injection pump extractor tool, EN9G1501
1. This tool is specifically designed for holding the sprocket / chain in place when disassembling the VP44 injection pump and high pressure pump.
2. Common rail fitted to BMW engines:
318D / compact (E46), 320D /TD compact(46), 330D(E46),
525D(E39), 525D(E60/E61), 530D(E39), 530D(E60/E61),
535D(E60/E61), 730D(E38) ,X53.0D(E53)

Made inTaiwan

VAG - Timing belt tensioner wrench, 50367
Extra flat type
Can also be used in hard-to-reach areas
5 Way adjustable and 180° pivotable handle
Especially for timing belts on 4- and 5 cylinder VAG engines and VW T4 servo pumps
Distace between pins: 18 mm
Pin diameter: 3 mm
OEM № T10020

Made in China

5 pcs 1/2"Dr. Triangle socket M5-M12, 50639

New style security sockets
M5 (8mm), M6 (10mm), M8 (12mm), M10 (15mm), M12 (16.5mm) x 1/2"D
Manufactured from Chrome Vanadium
Applications include: Electrical light fittings. Electrical cabinet tamperproof fixings
    Supplied on a socket rail for storage
These new style security sockets (part number 5683) are designed for the triangular profile, tamperproof fixings found on VAG TDi engines (injection pump quality adjustor), Bosch injector and certain light fittings.
The five piece socket set includes M5 (8mm), M6 (10mm), M8 (12mm), M10 (15mm), M12 (16.5mm), all 1/2" drive and supplied on a socket rail for storage.

Made in China

Universal Clutch Alignment Tool, 318-K211

For easy alignment of single plate clutches. Also suitable for flywheels with no pilot bearing.
Additional Information
    For single plate clutches.
    Suitable for flywheels with or without pilot bearing.
    Fast to fit and remove.
    Universal applications.
    Size of collets: 14 mm - 28 mm across 3 adaptors. Cone size range from 35mm < 67mm.

5 pcs Trim fastener and molding removal set

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

5 pcs 1/2"Dr. Twist socket set

Socket size: 17 mm, 19 mm, 21 mm, 22 mm and 12 mm and drift punch.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

Water pump sprocket holder, 50864

Application:
For GM Ecotec; Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines.
Securely holds water pump sprocket preventing loss of timing or damage to the engine.
Special half-moon design allows easier access to water pump gear bolts.
Uses access cover bolts to hold the tool in place.

Made in China

BMW - 3 pcs Rim Lock socket set, 50440

1/2" Dr. special socket setfor BMW rim locks use
Sizes:
17 teeth х 14.5 mm
10 teeth х 16.0 mm
21 teeth х 16.5 mm

Made in China

Universal tie rod wrench, 50443

The mster tie rod tools easily replace inner tie rod ends from 33-42 mm diameter without removing the rack and pinion.
Work with 1/2" square drive tools.

17 pcs proffesional slide hammer/puller set, 50139A
Features:
Designed to use with other 5/8" - 18 thread slide hammer attachments.
Internal and External jaws provide a variety of combinations to pull bearings, gears and seals
Pulls flange-type rear axle and most front wheel drive hubs.
Set includes grip wrench adapter and dent puller
Two and three way cross blocks and cone provide perfect jaw configuration for many jobs
Drop forged steel puller and fully hardened shaft and accessories.
Converts in to 2 or 3 jaw internal / external puller.

Bearing separator set 75-105, 50134

Pul out the bearing with H-type beam and bolts
Capacity: 75-105mm
1 separator
1 main rod
4 pcs extensions

CV Joint Assembly Removal Tool, 50044

Description:
- For removing CV joints on front wheel drive cars without removing the drive shaft
- Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip
- A robust tool for front wheel drive cars
- Suitable for most vehicle
- Removes CV joints without removing drive shaft
- Time saver
- Essential service tool
- Phosphate Coated for long heavy duty service life

1/2" Dr. Ratchet handle, G0001

72 teeth

Made of CR-V

Made in China