AUTOMOTIVE SPECIALTY TOOLS

Overhead valve spring compressor, 50109

Description: This overhead valve spring compressor is ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompressing the tool then remove spring. It features a reversible jaw / adaptor and automatic cam-action locking to a re-determined setting.
Specifications:
Easy to operate
Cam action level design for secure valve spring locking into the tool
Allow valve springs and valve stem oil seals to be replaced with the cylinder head
Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications
For use on a wide range of OHV, OHC and CHV engines.
Not suitable for use on engines with deep seated valves

Made in China

Draper Bearing, Seal and Bush Insertion/Extraction Kit (26 piece), 50092A

Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:

1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle.

Made in China

Draper Bearing, Seal and Bush Insertion/Extraction Kit (27 piece), 50092

Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:

1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle, 1 x M18 pulling spindle.

The set is in case.

Made in China

Universal ball joint puller, automobile, 23 mm, 50049

Specification:
External clamping width: 23 mm
Clamping depth: 65 mm
Width: 100 mm
Spindle length: 35 mm
Thread dimension: M14 x 1.5
Width across flats: 19 mm

Applicable:
For easy ejection of ball joint bolts, particularly for many cars from the following manufacturers: Audi, BMW, Fiat, Ford, Daimler-Chrysler, Opel/Vauxhall, Nissan, Toyota, VW, Volvo.

Made in China

Door upholstery tack remover, 50939

Designed to remove the car door panel.
Comfortable extended handle.
Made of heat treated carbon steel.
Screwdriver length: 200 mm

Made in China

3/4" Dr. Heavy duty ratchet handle, N0001

24 teeth ratchet mechanism.
Quick release function.
Knurled grip
Material of handle: Crome vanadium steel
Material of Head: CR-MO.
Overal lenght: 505 mm

Made in China

Compressor clutch remover tool, 789-30029-1

Contents:
5 mm - 8 Hex screws
1/4" - 20 Hex screws
3/8" - 16 Hex screws
2 & 3 hole puller plate fits most clutches, the mechanical force does the pulling job

Applicable: for SD-505, 507, 508, 510, 575, 708, 709

Internal snap ring pliers (Long arm), 50760

• 90° internal bent nose circlip pliers.
• For removing and installing the snap rings on hydraulic master cylinders on motorcycles.
• Spring loaded action for ease of use.
• Moulded handles for easy comfortable use.

Telescoping inspection mirror 798-66657

Dia 38 mm
- for Auto
- for Computer
- for Machine

Made in Taiwan

3.5Lbs Telescoping magnetic pick-up tool, 798-13572

11" OIL FILTER LOCKING PLIER (Straight) 280 mm, 114-51245

Made in Taiwan

Universal ball joint puller 20 mm, 108-8685

- Special steel for removing the ball pivots on steering arms, steering the rock, steering knuckles, ect
- Jaw open: 20 mm
- Material: chrome vadadium steel body

Universal ball joint puller 17 mm, 108-8698

- Special steel for removing the ball pivots on steering arms, steering the rock, steering knuckles, ect
- Jaw open: 17 mm
- Material: chrome vadadium steel body

Made in Taiwan

Ball Joint Separator 40 mm, 093-4323D
Features:
- Drop forged steel body and bolt for long and rough usage.
- Suitable for splitting track rod ends, anti-roll bar mountings, steering ball Joints and etc.

Jaw size: 40 mm
Screw: 7/8"-14UNF x 135 mm

Ball Joint Separator 29 mm, 093-4323C
Features:
- Drop forged steel body and bolt for long and rough usage.
- Suitable for splitting track rod ends, anti-roll bar mountings, steering ball Joints and etc.

Jaw size: 29 mm