1/2” Dr. E20 Cylinder Head Wrench-Man, 50811

Features: For loosening and fastening cylinder head screws. Removing the injector no longer necessarily.
Ideally suited for commercial vehicles.
Profil: E-Torx.
Drive: Square, 1/2".
Applicable: MAN series F2000 / F90 / F8, MAN buses with D25 and D28 engines.

Made in China

24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
 
Features: For operation of the oil filter housing cover when changing the oil filter insert on the DSG gearbox.
Applicable: VW and VAG group vehicles.
No removal of batteries or battery holders.
VW specification: DSG oil change within the inspection interval.
Drive: Square, 1/2".
Output: Outside 12-point profile.
Wrench size: 24mm.
Length: 199 mm.

Made in China

Brake Spring pliers, 210-0980-1

Features: for assemble and disassemble the springs of the brake shoes in a drum brake.
Caused Zero damage to the components.
Handle with a socket end for removing spring from anchor stud.
Handle with a grooved end for installing spring on anchor.
Jaw with an unique sunflower-shaped and swivel design allows the operator to grab the surface of the drum brake shoes firmly, and the other jaw hooks thehooking portion of the return spring. And then holding close two handles to assembly or disassemble the spring of the brake shoes.

Made in Taiwan

Combustion Gas Leak Tester Kit, 51111

Designed for testing the presence of CO² in the cooling system.
CO² in the cooling system can indicate a cylinder head gasket leak, cracked block, warped head, etc.
For use on water-cooled petrol and diesel engines.
Set contains:
1x Leak Detector
1x Rubber Bulb Pump
1x Release Valve and Connector
3x Cooling System Bayonet Adapter
2x Empty Bottle (250 ml)

Made in China

19mm 1/2"Dr Injection Line socket, 50802-19

Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for MERCEDES
Material: Cr-V
Size: 19 mm MERCEDES

Made in China

17mm 1/2"Dr Injection Line socket, 50802-17

Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW, OPEL 2.5TD, MERCEDES
Material: Cr-V
Size: 17 mm BMW, OPEL 2.5TD, MERCEDES

Made in China

9 PCS Cap Oil Filter Wrench Set, 50641

Contents:
3/8”Dr. 27mm, 6PT.
3/8”Dr. 32mm, 6PT.
3/8”Dr. 36mm, 6PT.
3/8”Dr. 64.5mm, 14 flutes.

3/8”Dr. 88.8mm, 15 flutes.
3/8”Dr. 74.2mm, 14 flutes.
3/8”Dr. 86.6mm, 16 flutes.
63 to 83mm Аdjustable wrench.

Made in China

M9X1.25 Brake Thread Repair Tool Kit, 50400

The repair kit for brake shoe threads is equipped with reinforced drills and ten thread inserts suitable for VAG (Volkswagen, Audi), Opel / Vauxhall, Ford.
Contents:
10pcs Thread inserts
Drill bits
Taps
Tiles (VAG, Opel, Ford)
Hexagon spanner

Made in China

BMW M52TU/M54/M56 - Crankshaft Pulley Holding Tool, 50296

Features: For BMW 6 Cylinder Engine M52TU / M54 / M56
Tool is designed to hold the crankshaft pulley stationary while loosening or tightening the center screw.
It can safely remove the pulley and won't damage the pulley shock - proof function.

Application: BMW (M52, M54, M56).

Made in China

Spark Plug Thread Repair Kit, 50261

Comprehensive and time saving kit of spark plug thread repair tools.
Especially suitable for the repair of deep -seated plug configurations.
Incorporates taper  M 14хP1.25/М 15.8xP1.25 and plug taps M 14x1.25 HSS together with integrated ream.
Stepped tap ensures correct alignment of cutter in existing spark plug hole.
Extension tools allow easy access to the bottom of the plug recess.
Includes set of plug inserts M14x1.25: 10 pcs L10mm and 10 pcs L15 mm

Made in China

Hydraulic Drive Shaft Remover/Press Set, 50127

Used to press drive shafts out of wheel hubs.
For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 98-125 mm diameter circle.
Especially for glued and rusty drive shafts.
Has a 10 ton capacity.

Applicable: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

Made in China

Mercedes-Benz OM654 - Engine Timing Tool Set, 51106

Applicable: A Class (from 2019), B Class (from 2019), C Class (from 2018), CLA (from 2019), CLS (from 2018), E Class (from 2016), GLB (from 2019), GLC Coupe (from 2019), GLE (from 2019), V Class (from 2019) and Vito (from 2019).

Engine codes: 1.6L 654.916 and 2.0L 654.920.

OEM No.: W654 589 00 40 00, W654 589 01 40 00 and W654 589 00 21 00.

Made in China

10 pcs Motorcycle Flywheel Puller Set, 60023

A set of flywheel pullers used for separating the flywheel from the crankshaft taper.
Contents:
5 double ended pullers with sizes:
M28 x M26 (1.0 mm thread),
 M25 (1.25 mm) x M22 (1.0 mm),
M27 x M24 (LH) (1.0 mm),
M26 x M22 (1.5 mm),
M27 (1.25 mm) x M20 (1.0 mm)
2 single ended puller:
M28 x 1.5 mm,
M19 x 1.0 mm
Threaded bolts: M14 x 1.5 mm, M16 x 1.5 mm, M18 x 1.5 mm

Made in China

Injector Seat and Shaft Cleaning Tool Kit, 50883

It contains a set of tools that ensure effective cleaning of the injector hole and the surface of the bed before inserting the new nozzle. It is used in a wide range of vehicles.
Suitable for Fiat Citroen BMW Peugeot Renault and Mercedes-Benz
Includes:
4 pcs cleaning brushes, brush holder, 3 pcs injector seat mill, cutter guide, sealing ring puller, brush holder extension injector seat and shaft cleaning kit, Note: only use brushes clockwise.
3 pcs conical sleeves for the guide pin 17 / 18.4 / 19 mm.
Guide bolts for sealing seat mills with 19 mm external hexagon head.
3 pcs milling heads:
15 x 19 mm diameter - Mercedes CDI
17 x 17 mm diameter - BMW, Peugeot, Citroen, Renault for Delphi / Bosch injectors
17 x 17 mm diameter 30° bevelled -  Fiat and Iveco sealing ring extractor.
Joint shaft with 6.3 mm (1/4 inch) hex bit holder for drill holders, for brushes with 6.3 mm (1/4 inch) hex bit holder.
2pcs  brush heads with 19.5 mm diameter, 2 pcs long, thin brushes for nozzle needle shaft.
6 pcs guide plugs for closing the nozzle needle shaft with holder for removal and installation.

Made in China

VAG DSG 0AM - Assembly Lever and Guide Pins, 50796

Features: Used to operate the engaging lever when removing and installing the mechatronic unit on 7-speed dual clutch gearbox DSG 0AM.
The guide pins ensure straight mounting of the mechatronic unit.
Applications:
Audi: A1 (2010-2018), A3 (2003-2012), TT (2006-2015)
Seat: Altea (2004-2015), Ibiza (2008-2017), Leon (2005-2012), Toledo (2004-2009)
Skoda: Fabia (2007-2014), Octavia (2004-2013), Rapid (2012-2020), Roomster (2006-2015), Superb (2008-2015), Yeti (2009-2017)
Volkswagen: Caddy (2004-2020), Golf Plus (2005-2014), Golf V (2003-2009), Golf VI (2008-2012), Jetta III (2005-2011), Jetta IV (2011-), New Beetle (2011-2019), Passat (2005-2010), Passat (2010-2014), Polo (2009-2017), Scirocco (2008-2014), Touran (2003-2010), Touran (2010-2015)

OEM#: T10407, T10406

Made in China