AUTOMOTIVE SPECIALTY TOOLS

Plastic Rivet Clip Removal Plier, 50944

Designed to remove reusable two-part plastic rivets, such as those used on plastic trims or door trims.
The head can be adjusted from 0° - 90° to achieve the correct angle to extract the centre locking clip.
Length: 230mm.
Steel construction.
Dipped handles.

Made in China

2 Pcs Wire Terminal Removal Tool, 50923

Designed to remove wire terminals from terminal blocks without damage.
Provide 12 different tool styles fit most common connectors.
Grey tool removes wires from terminals and red tool designed for Pack-Con and Weather-Pack terminals on GM C3 systems and retrieval of trouble codes from engine computer on some GM vehicles.

Made in China

PCD Gauge, 50918

For measurements the hole circle on steel and aluminum rims.
Greatly facilitates the determination of the hole circle.
Suitable for 4, 5, 6 and 8 lug rims.
4-Lug: PCD 4x98mm, 4x100mm, 4x108mm, 4x110mm, 4x120mm, 4x130mm, 4x140mm, 4x4.5"
5-Lug: PCD 5x100mm, 5x108mm, 5x112mm, 5x115mm, 5x120mm, 5x130mm, 5x135mm, 5x150mm, 5x4.5", 5x4.75", 5x5.0", 5x5.5"
6-Lug: PCD 6x135mm, 6x4.5", 6x5.0", 6x5.5"
8-Lug: PCD 8x170mm, 8x6.5"

Made in China

11 pcs Universal Clutch Alignment Tool Kit, 50808

Suitable for a wide range of vehicle including some light commercial vehicles. Screw action provides fast adjustment for required hub diameter. Eight interchangeable spigot adaptors aid close alignment.
Contents:
3 pcs Expanding mandrels: Ø15 - 19mm, Ø20 - 26mm, Ø23 - 36mm
8 pcs Centring bushes: 12, 14, 15, 16, 17, 18, 19 and 20mm (O/D)

Made in China

M8x1.0 Thread repair set , 50725M

Features:
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 8x1.0

Made in China

M9x1.25 Thread repair set , 50725N

Features:
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 9x1.25

Made in China

4" (102 mm) Replacement stone, 50724

Size: 4" (102 mm)

3 pcs set, for Standard engine cylinder hone 50724

Made in China

Brake & Fuel Pipe Fluid Lock Set, 50708

A tool kit for sealing metal brake pipes.
Suitable for clamping and sealing metal flared pipes on brakingsystems, cooling system bypass fuel pipes, AC pipes etc.
3 pcs anodised Aluminium bodies with composite screw.
Sizes:  4.2mm to 10mm.

Made in China

6 Pcs Pipe Threading Kit, 50706

This wrench is built to make job much simpler. Really save your time and energy while working. Use this professional ratcheting pipe threader to put a clean thread on your pipes. The thread in the plate head is tidy, which is not easy to skid.
Ergonomic handle design.
Made of malleable cast iron, which is durable and wearproof for long time use.
Suitable for iron, stainless steel, black gas & galvanised iron pipe
Sizes: 1/4", 3/8", 1/2", 3/4", 1", 1-1/4"

Made in China

5 pcs 1/2" Drive Extra Long Twist Socket Set, 50701

The set contains extended extractors of 1/2 "Dr., with special design.
Contains:
Extra long twist sockets: 17 mm; 19 mm; 21 mm and 22 mm
Extension
Material: Cr-Mo
Sockets length: 150mm
Designed for unscrewing damaged, deformed or corroded nuts or bolts.
THE USE OF IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

Clutch Alignment Mandrels, 50681

Suitable for cars and light commercial vehicles.
Fast hub diameter adjustment achieved via screw action.
Adjustable from 15-19mm and 20-26mm diameter.

Made in China

Air Conditioning Compressor Clutch Puller Set, 50677

Features:
Professional A/C Compressor Clutch Remover Kit.
Replaces clutches found on FS6, C171, 6P & 148 compressors GM R4 & A6, HR-6, DA-6 & V5 A/C compressors.
Sanden compressors SD505, 507, 510, 575, 708 & 709.
2 & 3 hole puller plate fits most clutches, mechanical force does the pulling.

Made in China

60 - 80mm Reversible Oil Filter Wrench, 50666

Features:
2 jaws with teeth provide a strong grip and are not easy to slide. The wrench can hold half of the filter for greater grip and reduce the risk of sliding if the filter is stubborn or damaged.
Reduce time-consuming disassembly and stubborn filter disassembly. Spring-loaded for easy installation and disassembly.
Is used with half bending rod or ratchet wrench.
Rigid high carbon steel with a spring that has strong elasticity and is durable..
Specification:
Special design allows the oil filter to be removed and installed quickly and easily.
Steel jaws securely grip oil filter without slipping.
Fits sizes 60mm - 80mm.
Use with 1/2" drive.
Reversible.

Made in China

10 pcs Car Clutch Alignment Tool Set, 50636

The set includes 8 centering pieces for insertion into the crankshaft bearing and a conically turned sleeve for receiving the clutch disc.
Features:
Faster, easier replacement of clutches.
Align clutch plates and pilotbearings accurately.
Centering shaft with clutch plate adaptor.
Adapter fits through clutch plate and into pilot bushing or bearing.
Electroplated for corrosion resistance, long lasting and durable construction.
For quick centering of the clutch disc on vehicles with pilot bearings.
Ensures a clean placement of the gearbox
Prevents unbalance of the coupling due to staggered installation.
Suitable for Audi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Seat, Skoda, Subaru, Toyota, Vauxhall
Weight: 830g

Made in China

17 pcs Master Front Wheel Drive Bearing Service Kit, 50405

Comprehensive set for the removal and installation of front hub bearings
Without the need to dismantle the steering assembly.
Heavy Duty Steel Drifts
Hub Screws - M12 x 1.5 and M14 x 1.5mm
Drift sizes - 55.5.59.62.65.66.71.5.73.78.84.86.91mm
Suitable for most front wheel drive cars and vans.

Made in China