NEGEL TOOL BOX

Hose clamp pliers with red coating, 780-0074

These pliers have a ratchet locking mechanism.
Holds the bracket in an open position for easy removal and installation.
Comfortable handle with ergonomic grip.

Made in Taiwan

45° Hose clamp pliers with red coating, 780-0058A

Features: To remove and install clamps for hose connections in hard-to-reach areas.
The jaws are curved at 45 °.
With ratchet locking mechanism.
Comfortable handle with ergonomic grip.

Made in Taiwan

1/2”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037А

Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axle.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm
• H: 32 mm

Made in Taiwan

3/4”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037B

Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axles.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm.
• H: 60 mm

Made in Taiwan

Engine timing tool kit - VAG VW AUDI 1.4 1.6 2.0i TDi CR 2012 ON, 780-8364

An 8 piece kit consisting of the components required to lock the crankshaft. Cam pulleyand fuel pump pulley in their timed positions to allow the removal and replacement of the camshaft timing belt
Contents:
A. 2.5mmTensioner Locking Tool, OEMT10265

B.Auxiliary Drive Tensioner Pin, OEMT10060A

C.Cam Shaft Pulley Timing Pin, OEM 3359

D.Fuel Pump Holding Tool, OEMT10051

E.Crankshaft Timing Tool, OEMT10490

F. 6mm Ball Hex Key, OEMT10264
G.Pin for E
Application: Post 2012 1.6 & 2.0 TDI Common Rail Diesel engines found in the Audi, Seat, Skoda and Volkswagen:
VW: Golf SV/Sportsvan, Golf VII, Golf VII Estate, Golf VII Wagon, Polo
SEAT: Leon, Leon ST
AUDI: A3 Cabrio, A3 Saloon, A3 Sedan, A3/A3 Sportback, A4, A4 allroad, A4 quattro,A5 Coupe/Cabriolet, A5 Sportback, A6, Q5,TT
SKODA: Octavia III
Engine: 1.4TDI CR, 1.6TDI CR, 1.6TDI CR GreenLine, 1.6TDI CR BlueMotion, 1.6TDI CR Ecomotive, 2.0TDI CR, 2.0 RS TDI CR, 2.0TDI CR Ultra
Engine code: CKFB, CKFC, CLHA, CLHB, CNHA, CNHC, CRBC, CRBD, CRFA, CRFC, CRKA, CRKB, CRLB, CRLC, CRMB, CRVA, CRVC, CSUA, CSUB, CUNA, CUPA, CUTA

Made in Taiwan

VW & AUDI Strut nut socket, 210-0155-AT

Features:
Suitable for the disassemble and installation of top shock retaining nut.
Used with 22mm spanner wrench.
Material: Heat treated and tempered chrome molybdenum steel (CR-MO)
Overall Length: 44mm
Applications: Most Audi & VW front wheel drive vehicles.

Made in Taiwan

Auto body repair pull clamp (Two way),113-01027NN

Compact and suitable for use in different spaces.
With two-way direction:
-Cross capacity: 2 tons
- Longitudinal capacity: 3 tons
- Gripping Surface: 37mm (wide) / 15mm (deep)
- Material: Cr-Mo
Bolt size: 14 mm x 120 mmL
Zinc plated. Corrosion resistant.

Made in Taiwan

Auto body repair pull clamp (Two way),113-01017C

Compact and suitable for use in different spaces.
With two-way direction:

-Cross capacity: 2 tons
- Longitudinal capacity: 5 tons
Bolt size: 16 mm x 70 mmL
Zinc plated. Corrosion resistant.

Made in Taiwan

Small mouth pull clamp, 113-01017A

Suitable for use in confined spaces.
One-way direction  of work.

Bolt size: 16 mm x 70 mmL
Capacity: 5 t
Zinc plated. Corrosion resistant.

Made in Taiwan

36 mm Viscous fan hub spanner, 058-6227A

Features:
For disassembly of FORD and GM (Opel / Vauxhall) viscous hub fins.
Cranked design for easy access.
Made of pressed, tempered, hardened and chromed steel with PVC handle.

• Size: 36mm.
• Lengh: 270 mm

Applicable:
Ford Granada 2.4 & 2.9; GM Carlton, Manta & Senator

Made in Taiwan

32 mm Viscous fan hub spanner, 058-6227

Features: For removal of thermo, viscous fan hubs. Cranked for easy access. Made of pressed, tempered, hardened and chromed steel with PVC handle.

• Size: 32 mm.
• Lengh: 270 mm

Applicalle:  
BMW: 316, 520i, 525i, 530i, 535i, 730i, 735i.
Ford: Capri, Sierra, Granada 2.0 & 2.8. Ford transit 2.0 1986-90 (with viscous fan) LCX 2.0, LCT 2.0, 2.5 Diesel 1980-90,LCX 2.5D & LCY 2.5D.

Made in Taiwan

41mm Viscous fan hub spanner, 058-62265

Applicalle:  For moving the water-pump in Opel, GM & Vauxhall in order to span the drive belt in  OHC - engines.
Made of pressed, tempered, hardened and chromed steel with PVC handle.

VW, AUDI Camshaft locking tool (4.2), 058-625000

Features: For engine synchronizationVW/Audi engines 2.5L I5 (BGP, BGQ, BPR, BPS, CBTA & CBUA),

3.2l [V6](4v)(BKH),4.2L[V8](4V)(BAR,BNS,BVJ, BYH & CAUA) & 5.2L (V10)(4v)(BXA & BSM).

Applicable: (20005-2008),A4 Avand (2005-2008),A4 Cabriolet(2007-2009),A6(2005-2009),A6 Avant (2006),A8(2007-2009),A8 L (2007-2009),Q7(2007-2009),R8(2008-2009), RS4(2007-2008),S5(2008-2009),S6(2007-2009)& S8(2007-2009) VW JETTA (2005-2012),

JETTA SPORTSWAGEN (2008-2009), BEETLE (2006-2010), BEETLE CONV. (2006-2010),

RABBIT(2006-2009) & TOUAREG (2007-2009)
No.to OEM #T40070

Made in Taiwan

Engine timing kit - VAUXHALL/OPEL 1.6 CDI, 011262505

A comprehensive kit to lock the 1.6 diesel engine into its timed position for the removal and replacement of the timing chain to the models listed.
Included in this kit is the added component of the camshaft sprocket support bracket that is required when removing the camshaft for essential work on the Cam followers
Applications: Astra-J, Meriva-B, Mokka, Zafira-C, Tourer 2013 onwards (CDTi, EcoFlex CDTi)
Engine codes; LVL/B16DTH, LVM/B16DTL, LVL/B16DTN, LVM/B16DTC, LWQ/B16DTE, LVL/B16DTJ

Made in Taiwan

Camshaft alignment tool -BMW N47, N47S, N57 - Diesel engines, 011262439A

Designed for the locking/positioning of camshafts and crankshaft.
Suitable for the 1.6, 2.0 or 3.0 l BMW engine such as BMW 1 Series, 3 Series, 5 Series, 7 Series, X1, X3, X5, X6; Mini Clubman, Countryman, Cooper D, Cooper SD, One D.
Engine codes: N47, N47-C16K1, N47-C16U1, N47-C20K1, N47-C20U1, N47-D20A, N47-D20C, N47-D20D, N47-D20K0, N47-D20K1, N47-D20O0, N47-D20O1, N47-D20U0, N47-D20U1, N47S-D20B, N47S-D20D, N47S-D20T0, N47T-D20K1, N47T-D20O1, N47T-D20U1, N57-D30A, N57-D30A0, N57-D30O0, N57-D30O1, N57-D30T0, N57-D30U0
OEM Ref: 115320,118760,116480,118741,118742,113340

Made in Taiwan