NEGEL TOOL BOX

Coil spring compressor 5/8" - 10 Square thread, 741-0107A

Tempered Chrome-molybdenum steel jaws with ACME threaded lead screw quickly & safely compress coil springs on all passenger cars & pick up trucks.
Size: 300 mm

Made in Taiwan

Coil spring compressor 5/8" - 11 UNC, 741-0107

Tempered Chrome-molybdenum steel jaws with ACME threaded lead screw quickly & safely compress coil springs on all passenger cars & pick up trucks.
Lenght: 300 mm

Made in Taiwan

VAG 2.4/2.5 TDI Engine Timing Tool Set, 780-8177

Set of engine timing locking tools for use on Volkswagen 2.4D with engine codes AAB, AJA (02/95-03).
• The correct alignment is achieved by placing equal thickness of shims between both ends of the bracket and the cylinder head Camshaft Setting Strap is used to set the correct timing position of the camshaft.
• The centre Part of the bracket fits into the slotted end of the camshaft and the ends of the bracket located on the cylinder head.
• Injection Pump Pulley Setting Spigot is 15.4mm in diameter and is used on engines with a one piece injection pump sprocket.
• The crankshaft damper holding tool prevents the damper from rotating whilst unfastening and refastening the centre bolt.
• This tool should be used with 3/4" Dr. power bar. VW group 2.5TDi common rail diesel engines (belt) in VOLKSWAGEN LT Crafter BJJ, BJK, BJL and BJM engines.

Timing Belt Change Engine Tool Set for Fiat, Ford, Lancia 1.2 & 1.4 8V, 780-8141

Features:
For locking the camshaft and crankshaft in place while you change the timing belt and perform other repairs on Fiat engines.
Kit consists of crankshaft locking tool, camshaft setting plate and belt tensioner adjuster for the 1.2 engine, and additional sprocket locking tool and alignment fixture for the camshaft on the 1.4 VVT engine.

Applicable:
Facilitates changing of the timing belt and allows checking of the engine timing on following cars:
- Fiat: 500 (07-12), Doblo/Cargo (05-10),Grande Punto (07-12), Idea (04-12), Linea (07-11), Panda EVO2, Punto EVO (09-12).
- Lancia: Ypsilon (06-11), Musa (05-12).
- Ford: Ka (09-12).
Fits following engines mdodels:
- Fiat: 1.2/1.2 Dualogic, 169A4.000,188A4.000 (EVO2), 199A4.000 1.4/1.4 Bi-Fuel LPG / 1.4 Natural Power CNG,199A7.000, 350A1.000.
- Lancia: 1.4/1.4 Bi-Fuel LPG, 350A1.000.
- Ford: 1.2 Duratec, 169A4.000 (FP4).
Includes following tools:
- Crankshaft Locking Tool
  to be used as OEM 2.000.004.500 on Fiat/Lancia and OEM 303-1480 on Ford.
- Camshaft Setting Tool
 to be used as OEM 2.000.004.400 on Fiat/Lancia and OEM 303-1479 on Ford.
- Camshaft Sprocket Locking Tool
 to be used as OEM 2.000.004.200 on Fiat/Lancia and OEM 303-1477 on Ford.
- Camshaft Cover Aligner 
to be used as OEM 2.000.004.300 on Fiat/Lancia and OEM 303-1478 on Ford.
- Tensioner Adjuster
 to be used as OEM 1.860.987.000 on Fiat/Lancia.

Made in Taiwan

11” Long bent 45° nose pliers, 654-1310

For gripping, adjustment and assembly work in hard to reach areas thanks to slim, very long design
Deep parts can be easily reached using the slim, half-round tips
Careful yet reliable gripping, holding and guiding.
Particularly suitable for work in the automotive trade and in mechanical engineering
Slim yet robust tool
Forged from special tool steel, oil-hardened and tempered
Head polished
Handles plastic coated
This model has a 45 degree angle bent nose
Made in Taiwan

1/4" Dr. Profession Ratchet Handle, 317-А2006

Compact stubby ratchet with a short head and ergonomic handle for comfortable operation.
Made of high-quality steel, it provides excellent performance in tight and hard-to-reach spaces where standard ratchets cannot fit.
Suitable for both professional and home use.

72 teeth

With quick release

Made in Taiwan

1/4" Dr. Profession Bent Ratchet Handle 72T, 317-A2031

72 teeth

Material: Cr-V

Made in Taiwan

1/2" Dr. Dr. Profession Bent Ratchet Handle 72T, 317-A4026

72 teeth

Material: Cr-V

Made in Taiwan

Bearing Puller Long Reach, 210-0858

3 position external jaws adjustable to 6, 8 and 10 inch length reach.
Screw extension extends screw length by 2-1/2 inch.
Forcing screw has 14 mm hex head for use with ratchet. 3/8 to 2 inch width bearing.
Reach: 300mm
Spread: 10~50mm
For long reach pulling jobs
Self Centering
Manufactured from drop forged alloy steel

Made in Taiwan

Universal ball joint separator 22 mm, 211-0163

This tool is used to separate the ball joint from the spindle support arm

Applicable:  Audi, BMW, Ford, Honda, Mercedes-Benz, Nissan, Opel, Renault, Seat, Skoda, Toyota, Volkswagen and Volvo.
Adjustable for Different Size Ball Joints
1-1/8" & 2-1/8" (30 - 56 mm) Maximum Opening Capacity
Lifetime limited warranty

Еngine timing tool set for VW, Audi, Skoda VAG 1.2FSI/TFSI; 1.4/1.6FSI; 1.4TSI, 50816

Set Include:
Crankshaft Locking Pin,Camshaft Locking Tool for 1.2 TSi ,1.2 TFSi,Camshaft Alignment Tool,TDC Indicator,Tensioner Pin,Timing Cover Alignment,Pins (2) (Guide Pins),Dial Test Indicator .
Application:
Audi: A1, A3 , A3 Sportback, A3 Cabriolet 1.2 1.4 TFSI
Seat: 1.4 TSI Alhambra, 1.2 1.4 TSI Altea/Altea XL, 1.2 1.4 TSI Ibiza mk5/Cordoba, 1.2 1.4 TSI Leon, 1.2 1.4 TSI Toledo
Skoda: 1.2 1.4 TSI Fabia II , 1.2 .4 1.4 TSI Octavia II /Octavia Combi, 1.2 1.4 TSI Rapid Spaceback/ Rapaid, 1.2 TSI Roomster, 1.2 TSI Roomster Praktik , 1.4 TSI Superb II, 1.2 1.4 TSI Yeti
VW:
1.2 1.4 TSI Beetle
1.2 1.4 TSI Caddy mk3/Caddy Maxi
1.4 TSI 1.6 FSI Eos
1.4 TSI 1.6 FSI Golf V, 1.2 1.4 TSI Golf VI, 1.2 1.4 TSI 1.6 FSI Golf Plus, Golf Cabriolet, Golf Variant
1.4 TSI 1.6 FSI Jetta mk3, 1.2 1.4 TSI Jetta mk4
1.4 TSI 1.6 FSI Passat (3C2, 3C5) 2005-2010, 1.4 TSI Passat (362,365) 2010-2014
1.2 TSI Polo (6R , 6C,) 2009-,Polo (6R) 2010-, 1.4 FSI Polo (9N3) 2005-2006
1.4 TSI Scirocco
1.4 TSI Sharan
1.4 TSI Tiguan (2010-), 1.4 TSI 1.6 FSI Touran (2003-2010).
Engine Codes:
1.2 TSi, 1.2 TFSI - CBZA, CBZB, CBZC
1.4FSi - AXU, BKG, BLN
1.4 TSi, 1.4TFSi - BLG, BMY, BWK, CAVA, CAVB, CAVC, CAVD, CAVE, CAVF, CAXA, CAXC, CDGA, CSMA
1.6FSi - BAG, BLF, BLP, BTS.

OEM#: T10170, T10171, T40011, T10340, T10341, T10414.

Made in China

Petrol engine twin camshaft timing kit BMW 1.6 N40/N45/N45T, 50659

This kit for 1.6 BMW, 4 cylinder twin camshaft 16V, chain driven petrol engines with vanos units on the inlet and exhaust camshafts.

Contents:
 Vanos alignment plate,
 Camshaft setting plate (inlet),
 Camshaft setting plate (exhaust),
 Flywheel locking pin,timing chain
 Tensioner pre-load tool, camshaft setting
 Plate securing screw.

Works with Models:E81/E87: 116I,  E46/E90: 316I, E46: 316CI, E90: 320si
Works with Gas Petrol engines: N40, N45 B16, N45 B20, N45T

Model Years:
2001–2004 --- 1.6 L N40 Engine
2004–2011 --- 1.6/2.0 L N45 Engine
2003 -2009 --- 116i -1.6 E81 / E87
2001- 2008 --- 316 i - 1.6 E46 / E90
2001 - 2006 --- 316 Ci - 1.6 E46
2001 - 2005 --- 316 ti - 1.6 E46

Will also work with these Chain drive makes BMW, Mini, Citroen, Peugeot

Code: 52074

Porsche Cayenne 4.5L, 4.8L, Audi Q7 Camshaft Timing Tool Set, 50652 This comprehensive set of tools enables to correct engine timing to be made when replacing the timing belt. Set of two fixtures necessary to set camshaft timing on 2002 – 2009 Porsche Cayenne V8 engines. This tooling is necessary to establish TDC timing any time the cam timing is disturbed for servicing of the cams, cylinder-head, timing chain or variable valve-timing cam phasers.

Petrol Engine Setting/locking Kit - BМW 1.6, 2.0 N43 - Chain Drive, 50634
Suitable for setting and adjusting the timing on 1.6 & 2.0 BMW N43 petrol engines.
Kit contains the necessary tools for aligning the Vanos units on the inlet and exhaust camshafts:
- Flywheel Locking Tool
- Timing Chain Tensioner
- Chain Tensioner Locking Pins x2
- VANOS Sensor Alignment Tool
- Camshaft Locking Tool
- Balance Shaft Locking Tool ...

Diesel injector copper washer remover install tool, 50629
Size: inner hole 7mm

•     Designed for use on most Common Rail CDI injectors to remove copper washer sealing the base of the injector.
•     Suits most European cars using Bosch CDI fuel injection
•     Handy screw thread and expanding jaw design
•     Remove and install the copper washers on diesel injectors quickly and effectively with this special tool.
•     The reach of 230mm long is designed to install copper washers on deep seated injectors.
•     For removing and installing the copper wires on diesel injector.
•     Quick & effective. Reach - 230mm.

    For deep seated injectors.
    Manufactured from Chrome Vanadium.