GEAR PULLERS AND BEARING SEPARATORS

17 Pcs Bearing and Seal Driver Set, 50147

Features:
It is only suitable for small bearings with a light press fit. e.g. bicycle wheels, alternator, washing machine, electric motors etc.
The tool is Not An Extractor, just an installer. For bearing removal needed another tool .
This comprehensive set allows the user to insert wheel bearing race and seals easier without damaging the race and axle housing.
Fits most standard bushing/wheel bearings.
Simply turn discs over to drive seals.
Material: Aluminium
Set includes the following sizes (small end diameter x large end diameter):
10mm x 12mm; 12mm x 14mm; 14mm x 16mm; 15mm x 17mm; 16mm x 18mm; 18mm x 20mm; 20mm x 22mm; 22mm x 24mm; 25mm x 27mm; 28mm x 30mm; 30mm x 34mm; 32mm x 36mm; 35mm x 40mm; 38mm x 42mm

Made in China

12 pcs Universal puller set, 50131

Applicable: Suitable for most car repair and all kinds of machine repair.
Contents:
Legs slide : 1 piece
Three legs slide : 1 piece
Arm length 100mm (4”): 3 pieces
Arm length 200mm (8”): 3 pieces
Arm length 250mm (10”): 3 pieces
Spindles: 160mm, 270mm

Made in China

31 pcs Wheel bearing removal tool kit, 50889

Features:
Practical set of tools for disassembly and assembly of the hub and wheel bearings.
Makes installation easy and efficient as it eliminates the need to remove the knee and steering knuckle.
The tools are made of high quality heat-treated carbon steel for durability and long service life.
The set is provided in a convenient suitcase.
Specification:
Material: carbon steel
Contents:
Pressure plates with diameters of:
50mm (1.97 "), 55mm (2.17"), 59mm (2.32 "), 63.3mm (2.49"), 66.6mm (2.62 "), 70.3mm (2.77"), 71.5mm (2.81 "), 73.1mm (2.87) "), 73.4mm (2.88"), 74.8mm (2.94 "), 77.5mm (3.05"), 81.5mm (3.21 "), 83.4mm / (3.28")
Sleeves with following diameters:
Inner diameter 69.0mm (2.72 "), Outer diameter 76.0mm (2.99")
Inner diameter 77.5mm (3.05 "), Outer diameter 86.0mm (3.38")
Inner diameter 82.0mm (3.23 "), Outer diameter 91.0mm (3.58")
Inner diameter 92.5mm (3.64 "), Outer diameter 102mm (4.02")
3 extractor bolts M12 x 1.5, Overall length 110mm (4.33 ")
3 extractor bolts M14 x 1.5, Overall length 110mm (4.33 ")
Spindle diameter 22.2mm x 300mm (0.87 "x 11.81"), (including thrust bearing)
Pressure nut 32 x 60mm (1.26 "x 2.36")
Pressure sleeve diameter 38mm x 40mm (1.49 "x 1.57")
Thrust washer diameter 40mm x 3mm (1.57 "x 0.12")
Weight: 13,500 kg

Made in China

3 Jaws Gear puller 3”, 50742A

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 3”
Capacity: 40 – 76 mm

3 Jaws Gear puller 4”, 50742B

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 4”
Capacity: 50 – 102 mm

3 Jaws Gear puller 3”, 50742C

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 6”
Capacity: 60 – 152 mm

Made in: China

3 Jaws Gea

3 Jaws Gear puller 8”, 50742D

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 8”
Capacity: 80 – 203 mm

Made in China

r puller 8”, 50141-8

3 Jaws Gear puller 10”, 50742E

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 10”

Made in China

3 Jaws Gear puller 12”, 50742F

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 12”

Made in China

2-Jaw Gear puller 80х100, 50141D

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 80 mm

Made in China

2-Jaw Gear puller 120х100, 50141A

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 120 mm

Made in China

2-Jaw Gear puller 150х150, 50141B

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 150 mm

Made in China

2-Jaw Gear puller 200х150, 50141C

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 200 mm

Made in China

Bearing separator 30-50 mm, 50132-1

-  Capacity: 30mm x 50mm  (1-1/4" to 2-1/4")
-  Bolt 9.5 x 125 mm, thread 3/8" x 24UNF
-  Body thread 3/8" x 16UNC
-  HRC 42-45°
-  Forged
-  Chrome plated

Bearing separator 50 - 75 mm, 50132-2

Capacity:2" 1/4"- 3 1/2". (50mm x 75mm)
Bolt 12.7 x 135 mm, thread 1/2" x 20UNF
Body thread 3/8" x 16UNC
HRC 38-45°
Forged
Chrome plated