GEAR PULLERS AND BEARING SEPARATORS

5 pcs Inner bearing puller, 50140

The kit consists of a slide hammer (2 Lb-980 g) and a set of extractors of various sizes needed to pulling internal bearings.
Capacity: 3/8 "(10mm) - 1-1 / 4" (32mm)
Contents:
Slide hammer - 980 g
Bearing extractor: 3/8 "to 1/2" (10 mm-14 mm)
Bearing extractor: 9/16 "to 11/16" (15mm-19mm)
Bearing extractor: 5/8 "to 1" (18mm-25mm)
Bearing extractor: 1 "to 1-1 / 4" (25mm-32mm)
Come with a carry case.

Made in China

Front wheel bearing tools – 72 mm, 50432

This wheel hub bearing tools kit is ideal for the damage-free fitting and disassembling  of generation-2 bearings units on all common vehicles for Audi, Seat, Skoda and for Volkswagen vehicles. The convenience of this kit is that it can be used in a situation without the need to dismantle the shock absorber with the hub from the vehicle. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Characteristics:
All the tools in the kit are heat-treated for strength and durability.
With this tool kit, you can easily remove bearings and other components.
These bearings are lightweight with a built-in mounting flange.
They are also preloaded with a retaining brace that fixes the bearing in the hub body.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.
Contents:
1 pcs Pair of half shells for dismantling (72 mm)
1 pcs Pair of half shells for installation (72 mm)
2 pairs Screws to fix the half shells
1 pcs  Dismantling plate
1 pcs Installation plate
2 pairs 5 x Bolts (72 mm - 76 mm in length , 8,1 and 11,9 mm in Diameter)
1 pcs Screw M 20 x 2,0 with nut hex drive 22 mm
1 pcs High strength ball bearing fitted spindle, 30mm drive
1 pcs Pressure plate with 8 holes, 72mm,  (122 mm in diameter, 18 mm in width)
Applicable:
For Audi A1 ( from year 2011)
For Audi A2 ( built after 2000)
For Seat Ibiza ( from 2002 )
For Skoda Fabia ( manufactured since 2000 )
For VW Fox ( from 2005 )
For VW Polo ( from 2002 )

Wheel bearing tools – 85 mm, 50432A

The hub bearing removal and installation kit with integrated flange serves for a seamless and quick replacement of the damaged generation bearing - 2 - 85 mm on all Volkswagen vehicles (Touareg & T5 with 16 ”wheels/ suspension, Transporter, Multivan). The convenience of this kit is that it can be used in a situation without having to remove the hub damper from the car. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Feature:
All tools in the kit are heat treated for strength and durability.
With this tool kit you can easily remove the bearings and other components.
These bearings are lightweight with a built-in flange.
They are also preloaded with a retaining bracelet that secures the bearing to the hub housing.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.

https://www.youtube.com/watch?v=pequSdvAJU0&feature=youtu.be

Contents:
5 Push pins
1 Pressure plate with 5 holes
1 Pair of half shells for dismantling
1 Pair of half shells for installation
1 Dismantling plate
1 Installation plate
L Type lever

3 Jaw Internal & External Puller Set, 50153

Dimensions:
Internal bearing extractor: 15 mm - 30 mm
Inner bearing extractor: 30 mm - 80 mm
External bearing extractor: 15 mm - 80 mm.
Locking the nut to open the jaws and secure the bearing. Then use the reverse hammer to pull the bearing.

Made in China

Bearing Puller Long Reach, 210-0858

3 position external jaws adjustable to 6, 8 and 10 inch length reach.
Screw extension extends screw length by 2-1/2 inch.
Forcing screw has 14 mm hex head for use with ratchet. 3/8 to 2 inch width bearing.
Reach: 300mm
Spread: 10~50mm
For long reach pulling jobs
Self Centering
Manufactured from drop forged alloy steel

Made in Taiwan

12-38mm (1/2"-1-1/2") Pilot Bearing Puller, 66619

Capacity:
Inside Diameter 12-38mm (1/2"-1-1/2")

Produced by Force, Taiwan

Net Weight: 920 g

Bearing puller, 666A035

Capacity: 19-35 mm

Made in: Force, Taiwan

40-90mm Thick Jaw Gear Puller, 65910

Jaws Thickness: 1.5mm
Depth: 100mm
Bearing Dimension: 40 -90m
Material: Made from High-Quality Chrome Vanadium Steel, heat-treated,which guarantees high strength, fracture resistance

Made in Taiwan

2 Jaw Gear Puller 80 - 100 mm, 9240150

Material: Cr-V

2 Jaw Gear Puller 100-120 mm, 9240152

Material: Cr-V

2 Jaw Gear Puller 150-150 mm, 9240154

Material: Cr-V

2 Jaw Gear Puller 150- 200 mm, 9240156

Материал: CR-V

Made n China

2 Jaw Gear Puller 250-200 mm, 9240158

Material: Cr-V

Front axle upper ball joint extractor installer VW T4, 50463

Suitable for removing and installing the upper front ball joint in situation without the need to disassemble.
Features a variety of adaptors used in different combinations for extracting and installing.

Applicable: VW; T4 2000 CC, T4 2500 CC

Made in China