INJECTOR TOOLS

Injector puller set for VAG (Audi / Seat / Skoda / VW), 50363

Features: Designed to extraction, installation and service for FSI injectors and most diesel engines installed in VW, Audi, Seat, Skoda.
Material: CR-Mo and S45C steel
Applicable: FSI petrol engine 1.4, 1.6, 1.8, 2.0, 2.7 V6; 3.0 V6; 3.2 V6; 3.6 V6 и 4.2 V8 ...

Fuel injection test set, 50199

The car fuel pressure diagnostic kit is suitable for most vehicles with a fuel injection system with petrol or gas engines (except Bosch, CIS Jetronic, Throttle Body Systems on GM cars).
Not suitable for diesel engines with high pressure injection pump or direct injection engines due to the low pressure range of the manometer.
Fuel pressure testing is an essential part of the fuel injection system troubleshooting process.
Contents:
The set is equipped with various fittings and connection hoses for testing.
15 "length hose is used for direct connection to 1/4" SAE standard fuel pump shredder valve
An 8 "length hose is for the M6 ​​fuel pressure test hole, and there are also adapters M8; M10; M12; M14 for the corresponding test port on fuel rail.
Aluminum tee to support the connection between the fuel pump and the engine for most cars.
Manometer, protected with a rubber shell, with a diameter of the dial 3-1 / 2 ", with a range of 0-10bar (0-140psi) and two-color coded scale for easy reading. The hoses use rubber nylon resin and the built-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16 "fuel drain hose help to safely release the pressure and easily restore the fuel.
Fuel pump pressure check:
The manometer is designed to easily and quickly check the pressure of the fuel injection pump and the fuel flow.
You can compare the pressure value with the manufacturer's recommended reference range to help diagnose the petrol engine system.
Low fuel pressure can be caused by kink/leak/clog on inlet supply side components, a bad fuel pump or regulator, low tank pressure
High fuel pressure may be caused by a bad fuel pressure regulator or kincked outlet return line.

Made in China

27 mm 1/2"Dr. HDI Engines Diesel Fuel Filter socket, 50640

Specially designed for easy disassembly of the fuel filter without damaging the plastic cover. Allows to be tightened to the corresponding torque, preventing air leakage and other malfunctions. It saves time.
Application:
Citroen C4 2.0 HDi 16V, C4 Picasso 2.0 / 2.2 HDi. C5 /, C8 2.0 / 2.2 HDi 16V, Jumpy 2.0 / 2.2 HDi
Fiat: Scudo / Ulysse Mk II 2.0 JTD 16V
Ford Focus / Focus C-Max / Galaxy / Kuga / S-Max 2.0 TDCi
Peugeot: 307/308/407/607/807 / Expert 2.0 HDi 16V
Volvo: C30 / C70 / S40 Mk II / V50 2.0 Diesel (136 HP)...

Diesel Injector extractor set, 50633

For removal of diesel injectors
Various adaptors make the kit suitable for most diesel injectors
Includes also the following components:
M14 x 1.5 for Delphi adaptor
M17 x 1 for Bosch adaptor
M20 x 1 for Denso adaptor
M25 x 1 for Siemens adaptor
M27 x 1 for Siemens adaptor
M27 x 1 for Bosch injector nozzle adaptor

Puller with M14 x 1.5P

3 x different slide hammers:
1.6 kg, 160 mm length
2.7 kg, 460 mm length
5.1 kg, 600 mm length

2 x pulling claws with fork opening:
13.7 x 18 mm, 105 mm length
12.7 x 19 mm, 130 mm length

5 x  Oxygen Sensor slotted 6-pt 1/2" sockets, 100 mm length sizes 25 - 27 - 28 - 29 - 30 mm

Injector extractor, sleeve design, with shells outer diameter 35 mm, internal diameter 29 mm, M17 x 1.0 spindle
Pulling adapter with external thread M27 x 1.0 (3pcs) and M25 x 1.0
Pulling adapter with internal thread M27 x 1.0 (3pcs)
Sliding hammer adapter for inner, outer and claw extractor.

Made in China

Diesel injector copper washer remover install tool, 50629
Size: inner hole 7mm

•     Designed for use on most Common Rail CDI injectors to remove copper washer sealing the base of the injector.
•     Suits most European cars using Bosch CDI fuel injection
•     Handy screw thread and expanding jaw design
•     Remove and install the copper washers on diesel injectors quickly and effectively with this special tool.
•     The reach of 230mm long is designed to install copper washers on deep seated injectors.
•     For removing and installing the copper wires on diesel injector.
•     Quick & effective. Reach - 230mm.

    For deep seated injectors.
    Manufactured from Chrome Vanadium...

7 pcs VAG TDI Injector puller set, 50347

Description: Design to remove diesel injectors from the VAG TDI engines

Applicable: For VW, AUDI TDI with engine code ALH, AHU, IZ, SEAT and SKODA

Including:
1.4 SDI / TDI; 1.9d / SDI / TDI / TDI (pd); 2.0TDI (pd) и (pd4); 2.5tdi; 2.5tdi (pd); 2.8tdi (pd) 2.7 / 3.0 TDI (common rail); 4.2tdi (common rail)

Made in China

Diesel injector puller, 50357

Specially designed for the removal of stubborn diesel injector fitteds CDI engines.
Features injector car removal socket, secutity hex key for removing the inner part of the inejector and a puller to remove the injector without damaging thr cam cover.
The engine type is fitted mainly to C-class, E-class and Sprinter vehicles.
The housing for the puller is recessed to fit the injector recess.

Applicable: For MercedesC-class, E-class, Sprinter vehicles and Crysler Grand Cherokee 27 crd(00-)

Made in China

Diesel Injector puller, 50301

Assists removal of subborn Bosch and Lucas diesel injectors.
Saves time & money when injectors are difficult to remove.
With M8x0.75; M12x1.5 and  M14x1.75 adaptors.

Flow Meter Set For Common Rail Diesels With 24 pcs Adapter, 50183
Features:  For use on up to 6 Injectors. Measures the amount of fuel the injectors return to the deposit tank.

Measures the amount of fuel the injectors return to the deposit tank.
It can identify damaged or clogged injectors quickly and easily
Direct measurement of return flow of the injector, using external flow meter.
24 adaptors for Bosch-01, Siemens-02, Denso-03 and Delphi injectors.

9 pcs. Common rail Diesel injector puller extractor set
Description: Slide hammer for DB CDI-engines & Mercedes CDI engines OM 611, 612, 613, Mazda BT50, Hyundai, Sanyong, Jeep, ML 270  etc.
For removing stuck and the seized common-rail injectors without removing the cylinder head.
The sturdy construction will enable the swift removal of even the most severely seized in injector.
Most often injectors can be removed without damage, allowing the injector to be reused.

17 pcs Diesel injector seat cutter set, 50682
This set is used to clean and decarbonise injector seats when changing injectors.
It helps to avoid blow-back due to poorly seated injectors.
Suitable for a wide range of vehicles of modern Common Rail Vehicles with injectors from Delphi and Bosh.

Contents:
14mm x 14mm Flat Reamer (for AUDI)
15mm x 19mm Flat Reamer
15.5mm x 15.5mm Flat Reamer
15.5mm x 15.5mm Angled Reamer
17mm x 17mm Angled Reamer
17mm x 17mm Flat Reamer
17mm x 17.5mm Flat Reamer
17mm x 19mm Flat Reamer
17mm x 19.5mm Flat Reamer
17mm x 20mm Flat Reamer
17mm x 21mm Angled Reamer
17.5mm x 20.5mm Angled Reamer
19mm x 21.5mm Flat Reamer
T-handle; Pilot Hex 19 x 170mm; 15.5 X 250mm Cutter; 2.5mm Hex Key

Made in China

BMW Common rail injector set, 50630

Special tool pulling out stuck injectors
with BMW Diesel Engine Code with M47TU / M 47T2 / M57 / M57TU / M 57T2
The support on the cylinder head enables high pull-off
disassembly of the cylinder head is therefore not necessary
The particular form of puller allows safe and precise extraction, especially in very tight injectors / injectors.
Contents
- 2 support feet 115 mm
- 2 support feet 140 mm
- Supporting bridge with ball bearing
- Spindle M16 with unilateral M17 thread for mounting in the injector
- 29mm socket wrench for removing the electrical unit
- Allen key for removing the injector needle
For the following BMW - types
In contrast to solutions with impact hammer, the injectors are removed with this tool by even train and in the optimum position for installation position.
E38: 730 d
E87: 118 d / 120 d
E46: 318 d / 320 d / 330 d
E39: 520 d / 525 d / 530 d
E60/E61: 520 d / 525 d / 525 xd / 530 d / 530 xd / 535 d
E63/E64: 635 d ( 04-10 )
E38/E65/E66: 730 d
E83: X3 2.0 d / 3.0 d
E53/E70: X5 3.0 d
E90/E91: 316 d / 320 d
E90/E91/E92/E93: 325 d ( 06-10 ), 330 d / xd ( 98-08 ), 335 d
This also applies to same engine in a Land Rover - types such as
Range Rover: 2.5 DT   Year 1994 - 2002
Range Rover: 3.0 TD6   2002 - 2006
Freelander: 2.0 TD4   2002 - 2006...

1/2"Dr Injection Line socket

Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW Diesel engines and OPEL 2.5 TD engines.
Material: Cr-V
Size: 14; 17; 19 mm ...

14 Pcs Injection Puller Tool Bosch, Delphi, Denso and Siemens Diesel Injector Remover, 50348

Application:

Suitable for the fast and reliable removal of Bosch, Delphi, Denso and Siemens diesel Injectors.

Includes:

Comprehensive set of 1/2in.Dr Injector Sockets - 25, 27, 29, 30 mm

7 Injector Adaptors and Slide Hammer

Blow mold case for storage

Contains:

Impact Hammer: 3.6 kg

Overall length (. M handle) slide hammer: 510 mm

- Length of the handle: 110 mm

- Ball joint adapter

- Adapter: M14 x 1.5 for Delphi

- Adapter: M17 x 1 for Bosch

- Adapter: M20 x 1 for Denso

- Adapter: M25 x 1 for Siemens

- Adapter: M27 x 1 for Siemens

- Adapter: M27 x 1 for Bosch

- 4 slotted 6-point socket wrench inserts ( 100 mm long) for electrical unit: 25 - 27 to 29 - 30mm

- 10 mm hex bit application, 1/2 "drive

Made in China

Extra long Oxygen sensor socket 22 mm, 50491

Material: CR-MO
Suitable for: BMW, Ford, Mercedes Benz C and E class (602, 605, 606 engines), Opel, Rover, VAG, Volvo, VW, Audi, Skoda, Seat.

1/2 ", Size: 22 mm, L = 150 mm