INJECTOR TOOLS

BMW B38, B48 – Valve Pressure Spring Tool Set, 51108

Features:  To remove and install the pressure spring on intermediate lever of the engine. It can easily install and remove the valve pressure spring without damaging the engine.
Made of heavy-duty steel material, high-quality material,high strength, high hardness, coated with anti-oxidation,which can effectively prevent the tool from rusting.
Applicable: Suitable for BMW and MINI B38, B48 petrol engines.
BWM 1 series, 2 series, 3, 4 series, X1 all from 2015.    X2 from 2018 & i8 from 2014.    MINI Hatch from 2014, Clubman from 2015, Countryman from 2017.
Engine codes BMW & MINI B38 A15A, B38 B15A, B38 K15A, B48 A20A, B48 A20B, B48 B20A, B48 B20B.

OEM#: 2 359 088, 2 359 089.

Made in China

55-175mm Valve Spring Compressor Multi-Valve  50853

Used to assist with the service and repair of multi-valve petrol and diesel engines with deep seated valves.
Suitable for general use on OHC, OHV and CVH engines.
Double plastic coated locking handles to keep valve springs positively compressed during work.
Jaw capacity: 55-175mm.
Throat clearance: 165mm.
Reversible jaw and adaptors.

Made in China

MINI N12, N16, N18 - Valve Pressure Spring Remover and Installer Set, 50589

Features: Designed to remove and install the pressure spring on intermediate lever.
Application:
MINI: Clubman, Clubvan, Countryman, Cooper, Coupé, Mini One, Paceman, Roadster.
Citroen: C3, C3 Picasso, C4, C4 Picasso, C5, DS3, DS4, DS5.
Peugeot: 207, 208, 3008, 308, 5008, 508, RCZ, Partner.
Engine codes:
MINI: N12, N16, N18
PSA: EP6, EP6CDT, EP6CDTM

OEM tools: 11 9 571/0197-3B1, 11 9 572/0197-3B2.

Made in China

BMW N13, N20, N26, N55 - Valve Pressure Spring Tool 50592

Designed to remove and install the pressure spring on intermediate lever.
Easy To Remove and Install Valve Spring
A must have for changing valvetronic camshaft bearings and camshaft.
Compatible with BMW N13, N20, N26, N51, N52, N53, N54, N55 Engines
Applicable:
BMW - 135i (2011 - 2013); BMW - 135is (2013 - 2013);
BMW - 325i (2006 - 2006); BMW - 325xi (2006 - 2006);
BMW - 330i (2006 - 2011 ); BMW - 330xi (2006 - 2011);
BMW - 335Cic (2011 - 2012); BMW - 335i (2011 - 2014);
BMW - 335xi (2011 - 2012); BMW - 525i (2006 - 2007);
BMW - 525xi (2006 - 2007); BMW - 530i (2006 - 2007 );
BMW - 530xi (2006 - 2007 ); BMW - 535i (2011 - 2014);
BMW - 640i (2012 - 2014); BMW - X1 xDrive 35i (2013 - 2014 );
BMW - X3 xDrive 35i (2011 - 2014 ); BMW - X5 xDrive 35i (2011 - 2014 );
BMW - Z4 3.0i (2006 - 2008 ); BMW - Z4 3.0si (2006 - 2008).

EM#: 11 7 110.

Made in China

24 pcs Pneumatic Injector Puller Set, 51247

Pneumatic injector extractor kit. Includes extractor and several adapters, compatible with a wide variety of injectors.
Through the use of pneumatic force, it allows extracting the injectors without the use of inertia hammers or mechanical extractors.
Kit comes with an air powered tool uses vibrations and 20-30Nm torque, which removes tight and seized injectors.
Have a 3pcs puller hooks ( open 12mm/13.5mm/16mm), for pull out the injectors with a relatively deep position, makes it easier to pull ou
Technical specifications:
Type:Air Vibration Injector
Material: Steel
Input pressure :72 - 116 psi / 5-8 bar
Adapters M20x1.0, M18x0.75, M17x1.0
Adapters M8x1.25, M8x1.0, M8x1.5
Adapters M14x1.5, M16x1.5, M18x1.5, M20x1.5, M22x1.
Adapters M25x0.5, M25x1.0,
Adapters M26x0.75, M29x1.0, M31x0.75
Adapters M27x0.75, M27x1.0
Set Includes:
1x air vibration tool
1x air hose
1x air plug
19x adapters
3x puller hooks

Made in China

Glow Plug Electrode Removal Tool Set M8 / M10, 51031

Features: Designed for removing broken glow plug electrodes.
Suitable for glow plug M8x1.0, M10x1.0, M10x1.25.
Contains:
2 pcs Tap: M3x0.5, M4x0.7
2 pcs Drill: 2.5x120mm, 3.3x140mm
2 pcs Thread Rod: M4x0.7x175mm
1 pcs Thread Rod: M3x0.5x175mm
3 pcs Extraction Nut
3 pcs Extraction Adaptor: M8x1.0, M10x1.0, M10x1.25
3 pcs Guide bolt: M8x1
3 pcs Guide bolt: M10x1.0
3 pcs Guide bolt: M10x1.25

Made in China

Injector Seat and Shaft Cleaning Tool Kit, 50883

It contains a set of tools that ensure effective cleaning of the injector hole and the surface of the bed before inserting the new nozzle. It is used in a wide range of vehicles.
Suitable for Fiat Citroen BMW Peugeot Renault and Mercedes-Benz
Includes:
4 pcs cleaning brushes, brush holder, 3 pcs injector seat mill, cutter guide, sealing ring puller, brush holder extension injector seat and shaft cleaning kit, Note: only use brushes clockwise.
3 pcs conical sleeves for the guide pin 17 / 18.4 / 19 mm.
Guide bolts for sealing seat mills with 19 mm external hexagon head.
3 pcs milling heads:
15 x 19 mm diameter - Mercedes CDI
17 x 17 mm diameter - BMW, Peugeot, Citroen, Renault for Delphi / Bosch injectors
17 x 17 mm diameter 30° bevelled -  Fiat and Iveco sealing ring extractor.
Joint shaft with 6.3 mm (1/4 inch) hex bit holder for drill holders, for brushes with 6.3 mm (1/4 inch) hex bit holder.
2pcs  brush heads with 19.5 mm diameter, 2 pcs long, thin brushes for nozzle needle shaft.
6 pcs guide plugs for closing the nozzle needle shaft with holder for removal and installation.

Made in China

Diesel injector sealing ring puller, 50566

Features: Slide hammer action easily removes diesel injector copper ring seals
Tapered point screws into the seal, locking it to the tool
Hammer action extracts the copper ring seal even when there is carbon build up
Extracts the sealing rings from between the injector nozzle & the cylinder head without damaging the injector recess or head.
It's designed to remove of sealing rings with internal diameter 4 to 16 mm
Applicable: Ideal for Mercedes & many other diesel engines that use copper injector ring seals

Made in China

Pneumatic Injector Puller Set, 51107

Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.

.Made in China

1/2"Dr. 22mm Oxygen Sensor Socket, 51082

Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 22mm

Made in China

1/2"Dr. 19mm Oxygen Sensor Socket, 51081

Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 19mm

Made in China

1/2"Dr. 17mm Oxygen Sensor Socket, 51080

Material: Cr-V
Drive: 1/2”, 6-pt.
Overal lenght: 85mm
Slot size: 8mm
Size: 17mm

Made in China

HGV Diesel Injection Nozzle Socket, 50825

Features:
Used to install and remove the diesel injection nozzle on MAN, Mercedes-Benz and Scania commercial vehicles.
Specially designed with window, toothed end and M14x1.5 pulling force screw.
Applicable: Mercedes-Benz CRD, MAN & Scania

Made in China

4 Pcs Truck Diesel Injector Socket Set, 50650

Contains:
1 pc  Hex 32mm x 70mm x 4 teeth (with M14 x 1.5 receiver thread) for Mercedes-Benz, Neoplan and Setra.
1 pc 1/2"Dr. x 72mm x 4 teeth for Mercedes-Benz.
1 pc Hex 32mm x 120mm x 4 tooth for MAN and Mercedes-Benz.
1 pc 1/2"Dr. x 120mm x 3 teeth for MAN and Mercedes-Benz.
Also suitable for some Iveco, Scania and Renault commercial vehicles.

Made in China

5pcs Fuel Injection Pump tool Set for VW, Audi, Skoda,  Seat TDI, 50639A

Diesel injection pump special socket set is used when loosening and removing the triangular head screws on the injection pump.
Application: For Bosch diesel injection pump VE (Bosch VE), VP EDC TDI (Bosch TDI), and VP 37 (Bosch CR).
Contents:
For central closing plug of Bosch VE.
Governing pressure socket of Bosch VE.
For bearing screw governing lever of Bosch VE.
For top cover screw of Bosch TDI.
For body of Bosch CR.
Sizes:
3/8" Dr. 6.5mm valve wrench
3/8" Dr. 7.5mm key
3/8" Dr. 13mm for fixing screws,
1/2" Dr. 26mm for central locking.
1pc Govening pressure socket 10mm, L77mm
Made in China