INJECTOR TOOLS

Valve Spring Compressor Kit, 50590

Designed to remove and install valve springs and valve stem seals without removing cylinder head.
Air pressure helps prevent the valve from falling into the combustion chamber.
Adapters: 23mm, 25mm, 30mm.

Made in China

6 Pcs Diesel Injector Line Socket Wrench Set, 50471

Suitable for dismantling injector lines on most diesel engines
Features: For loosing and tightening nuts and bolts in confined space such as fuel injector connections.
L-type, open ended.
1/2" Dr. 12pt.
Material: Cr-V
Size: 12mm, 14mm, 16mm, 17mm, 18mm, 19mm.

Made in China

Overhead valve spring compressor, HS3422

Description: This overhead valve spring compressor is ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompressing the tool then remove spring. It features a reversible jaw / adaptor and automatic cam-action locking to a re-determined setting.
Specifications:
Easy to operate
Cam action level design for secure valve spring locking into the tool
Allow valve springs and valve stem oil seals to be replaced with the cylinder head
Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications
For use on a wide range of OHV, OHC and CHV engines.
Not suitable for use on engines with deep seated valves

Made in China

Overhead valve spring compressor, EN62109

Description:
This overhead valve spring compressor is ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompressing the tool then remove spring.
It features a reversible jaw / adaptor and automatic cam-action locking to a re-determined setting.
Specifications:
Easy to operate
Cam action level design for secure valve spring locking into the tool
Allow valve springs and valve stem oil seals to be replaced with the cylinder head
Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications
For use on a wide range of OHV, OHC and CHV engines.
Not suitable for use on engines with deep seated valves

Made in Taiwan

Fuel Tank Lock Ring Tool, 50866

To remove/install plastic fuel tank lock rings without damage
Compact design
Regulation range: 4" to 7-1/4"(100mm to 184mm)
Applicable: Works on many 2004 and newer vehicles including Ford F-150, Chevrolet pickups, Chrysler/Dodge mini vans, PT Cruiser, Dakota and Durango also works on smaller GM serrated rings and traditional rings.

Made in China

Glow Plug Conncetor Plier(straight), 50838

Straight heads for direct access
Designed to remove hard to reach glow plugs connectors
Prevents damage
Soft grip handles with thumb restraints
Applicable:
Suitable for diesel engines for Audi, BMW, Mercedes-Benz, Volkswage

Made in China

7 pcs Glow Plug Puller Kit, 50646

Designed for extracting failed glow plugs.
Contents:
External grip (7.7mm internal Ø ) Includes size 4 (6.0mm) contraction collet.
External grip (6.8mm internal Ø ) Includes size 3 (5.0mm) contraction collet.
Contraction collet: Size 3 (5.0mm).
Contraction collet: Size 2 (3.6mm).
Contraction collet: Size 1 (2.7mm).
T -bar slide hammer/puller.
Internal (expansion collet) puller.

Made in China

Universal Valve Spring Install Remove Tool, 50610

To remove valve springs and valve stem seals on the vehicle without taking the head off!
Works great in narrow engine bays where space is tight. Huge time saver.
Suits European, American and Japanese cars. Such as Mercedes Benz, BMW, Volvo, Toyota, Mitsubishi, VW, Ford etc.
Especially suitable on BENZ V6 Engine and BMW V8 Engine.
May not work on some S63 engines due to the lower sitting engine.
This kit also caters to engines that require a 14mm spark plug socket (or M12 x 1.25p)
Engines:
Mercedes Benz: M102 / M103 / M104 / M111 / M112 / M113 / M271 / M272
BMW: N42 / N46 / N52 / M52 / M54 / M56 / N62
Toyota / Mitsubishi / VW / Audi, ect.
Just a few vehicles that have actually been tested with, this kit suits many more.

Made in China

Injector Nozzle Seat Cleaning Tool - Mercedes-Benz, 50277

Ideal for cleaning of the nozzle seat, the injector mounting hole and the small aperture leading to the combustion chamber.
Suitable for
Mercedes-Benz CDI engines OM611, OM612, OM613, OM639, OM640, OM642, OM646, OM647, OM648, OM651, OM668, Smart R660.
Also applicable to following engines:
PSA: 2.7 HDI / engine DT17, 3.0 HDI / engine DT20
Chrysler: 2.5 CRD / engine OM664
Toyota: 3.0 D-4D / engine 1 KD-FTV, 2.2 D-4D / engine 2 AD-FHV, 2 AD-FTV
Lexus: 2.2 diesel / engine 2 AD-FHV
Diameter: 7.5 / 17.0 / 19.1mm
Total length: 261mm

Made in China

Oil Filter Chain Wrench, 50568

Double chain with spring locking mechanism for added security.

Swivel handle enables to work in narrow spaces.

Suitable for all types of oil filters.

Chain length: 520mm.

Capacity: Ø60-160mm.

Chain width approx. 22 mm

180° swivel handle

Surface finish: Satin chrome plated

Gross weight: 930 g

Made in China

4 pcs Diesel Injector Socket set, 50499

For disassembly of an electric solenoid by Siemens and Bosch injectors.
4pcs. 1/2 ”Dr.
Elongated hexagonal inserts with a wide slot.
Dimensions: 25 mm, 27 mm, 29 mm, 30 mm
Length 100 mm.
Material: Cr-Mo (chromium molybdenum)

Application:
25 mm hexagon: Siemens injectors for 2.0L DW10 HDI engines (PSA, Ford, Toyota, etc.).
27 mm hexagon: Siemens Piezo injectors for 2.0L DW10 HDI engines (PSA).
29 mm hexagon: Bosch injectors for various CDI and HDI engines.
30 mm hexagon: Bosch injectors for Renault / Nissan 1.9L F9Q engines.

Made in China

VAG Ignition Coil Remover, 50281

For removing ignition coils on VAG models as of 2013

Pencil type for inserting in mounting hole of the ignition coil suitable for 4 cylinder 1.2 / 1.4 / 1.8 / 2.0 FSI / TFSI engines built in e.g. VW Golf, Audi A3, Seat Leon, Skoda Octavia

OEM № T10530

Made in China

Valve stem seal ring pliers, EN9G0102

Long neck designed to reach into confined area of the seal to grip it for removal
Gripping serration in the allow them to grasp both original equipment and aftermarket seals regardless of the configuration.

Made in Taiwan

6 pcs 3/8"Dr. Glow Plug socket set, 50884

The set contents six 6-pt. socket inserts with a 180 ° flexible head for 8, 9, 10, 12, 14, 16 mm glow plugs

Overal lenght: 85 mm

Drive: 3/8"

Material: Cr-V

Made in China

VW/Audi Spark plug electric wire remover, 04029035

The tool is designed to separate the electric wire from spark plug.
Application: Volkswagen and Audi

Made in Taiwan