mercedes

Mercedes-Benz OM654 - Engine Timing Tool Set, 51106

Applicable: A Class (from 2019), B Class (from 2019), C Class (from 2018), CLA (from 2019), CLS (from 2018), E Class (from 2016), GLB (from 2019), GLC Coupe (from 2019), GLE (from 2019), V Class (from 2019) and Vito (from 2019).

Engine codes: 1.6L 654.916 and 2.0L 654.920.

OEM No.: W654 589 00 40 00, W654 589 01 40 00 and W654 589 00 21 00.

Made in China

Mercedes-Benz Camshaft Adjuster Control Valve Socket T100H, 50837

Designed for removal and installation of the camshaft adjuster control valve.
Suitable for Mercedes-Benz M133, M157, M176, M177, M178, M256, M264, M270, M271.8, M271.9, MG272, MG273, M274, M276 and M278 petrol engines.
Size: 1/2" Dr. x T100H
L: 78mm
Material: Cr-Mo
Made in China

Mercedes-Benz 9G-Tronic Transmission - Oil Drain and Refill Set, 50569

Designed for draining and refilling ATF on Mercedes-Benz 9-speed automatic transmissions (type 725.0)
Special design for leak-free and spill-free ATF services
Refill adapter shall be used with an ATF refill pump and tank

OEM №: 725 589 02 90 00, 725 589 00 90 00

Made in China

Mercedes Benz Ball Joint Remover Installer Set, 50453

Spesialized 10-Piece tool kit to service all of the pressed-in ball joints incorporated in the Mercedes W210 / W211 / W220 / W230 / W163/ W164 suspensions.
This tool set allows servicing (installation and removal) of the specified ball joints on the vehicle. This saves tremendous time and effort by avoiding the necessity of disassembling the brake system and other suspension components that would disturb suspension alignment.
Includes:
C-Clamp press tool forged (not cast) form SCM440 Steel (HRC 38-42 hardness)
Front Suspension Ball Joint press fixtures for W220 / W211 / W230 Chassis - used in Conjunction with the C-Clamp Press.
Front Sway Bar Ball Joint (pressed into control arm) press fixtures for W220 /
W211 - used in Conjunction with the C-Clamp Press.
Front & Rear Suspension Ball Joint press fixtures for W163 / W164 Chassis - used in Conjunction with the C-Clamp Press.
Ball joint socket (4-prong) for servicing front ball joint on W163 / W164 Chassis
Application: Mercedes Benz
W210 Chassis - 1995-2002 E Class
W211 Chassis - 2002-2009 E Class
W220 Chassis
W230 Chassis
W163 Chassis - 1998-2005 M Class
W164 Chassis - 2006-present M Class

Made in China

Mercedes M282 – Timing tool set, 50542

Features: For changing the timing chain and setting the timing for:
Mercedes A-class W177 A200
Mercedes B-class W47 B180, B200
Renault / Dacia / Nissan with TCe turbo engines
M282.914 / H5F / H5H / HRA2

Made in China

Mercedes Benz /BMW Oil pan wrench, 846-7157

A wrench designed specifically to service the driveline fluids on most BMW and Mercedes Benz vehicles.
The 14-mm Allen end services the fill and drain plugs on the transmission and differential housing. The low-profile design allows access where restricted space does not allow the use of a conventional socket. The 17-mm box end services the oil drain plug.

BMW: Most vehicles since 1990
Mercedes Benz engine types: 102.92/93/96/98/99, 103, 104, 110.92/98/99, 112, 113, 116, 117, 119, 120, 266, 275, 285, 601, 602.91/93/94/96, 603.91/93/96/97, 604, 605, 606, 615, 616, 617.91 /95
Mercedes transmission types: 716, 717, 722, 63

Made in Taiwan

Mercedes Benz compressor belt pulley, 01125039

Special tool for using on removing / installing compressor belt.
With Special three point design for suitable using on parts of the vehicles.
Applicable: BENZ M112, M113, M272M, M273.

Made in Taiwan

5 Pcs 1/2" Drive Mercedes Specialized Socket Set, 50459

Applicable:
For servicing gearboxes, differential, front axle bearing, rear axle flange on most Mercedes-Benz vehicles.
Material: Cr-V
Contents:
(A): 8 mm tooth x 70 mmL - For Mercedes gearbox flange.
(B): 6 mm tooth x 70 mmL - For Mercedes differential flange.
(C): 6 mm tooth x 70 mmL - For front axle wheel bearing of Mercedes G-Class (W460 / W461 / W463)
(D): 6 mm tooth x 70 mmL - For Mercedes W107, W114, W115, W116.
(E): 8 mm tooth x 80 mmL - For rear axle of the drive shaft flange of Mercedes W116, W123, W126.

Made in China

Mercedes Engine timing chain riveting tool set, 50684A

Essential tool for timing chain work on Mercedes Benz 1.7D, 2.1D, 2.2D, 2.7D, 3.0D, 3.2D, 3.9D and 4.0D CDi diesel engines.

May also be used on some Chrysler / Jeep 2.2D, 2.7D and 3.0D CRD diesel engines.

For Timing Chain on Mercedes Petrol and Diesel engines.

OEM No.:
112 589 09 63 00
602 589 00 39 00
602 589 02 33 00
602 589 02 40 00
602 589 05 63 00
602 589 05 63 01

Made in China

Engine timing tool set Mercedes Benz - Chrysler – Jeep, 50378

Suitable for both petrole and diesel engines.
The kit includes flywheel locking tools and a camshaft locking plate.
Contents:
2 pcs. Camshaft locking pins
Flywheel plate locking tool
Flywheel fixing tool with M6 x 90 mm bolts
Suitable for the following vehicles:
Models: Mercedes Benz, Chrysler, Jeep.
Mercedes:
CDI-C Class 2.0 (03-08), 2.2 (98-04), 2.2 (03-08), 2.2 (07-09), 2.7 (00-06)
E-Class 2.0 (02-09), 2.2 (98-03), 2.2 (02-09), 2.7 (98-03), 2.7 (02-09), 3.0 (02-09), 3.2 (98-03), 3.2 (02-09)
G-Wagen 2.7 (01-05)
M-Class 2.7 (99-05)
S-Class 3.2 (99-03)
Sprinter 2.7 (99-06)
V-Class 2.2 (99-03)
Viano 2.0 (03-09), 2.2 (03-09)
Vito 2.2 (99-03), 2.2 (03-09)
Chrysler:
CRD-PT Cruiser 2.2 (02-08)
Jeep Grand Cherokee 2.7 (01-05)
Engine code:
611.960/961/962/980
612.961/962/963/965/967/981
613.960
646.811/812/951/961/962/963/820/821/982/983/966
647.961/982
648.961
EDJ
OEM No.: 111589031500/8929; 601589024000/8932; 602589004000/8933

Made in China

Mercedes Benz M156 M159 Engine Timing Camshaft Tool, 50656

Tool for adjusting the timing (timing chain change) for Mercedes Benz 6.2L V8 with:
- M156 Engine: C63, CLK63, ML63, R63, E63, S63, SL63 (AMG)
- M159 Engine: SLS (AMG)

Contents:
Camshaft locking tool: OEM: 156 589 00 61 00
Camshaft position sensor adjustment tool: OEM: 156 589 00 32 00
Setting tool for two piece intake camshaft sprocket: OEM: 156 589 01 63 00
Application:
Benz AMG 156, ML63 AMG. S 63L AMG. S 63 AMG
R63 AMG L4matic, R63AMG 4 MATIC, E 63 AMG CLS 63 AMG CLK 63 AMG
CLK 63 AMG Black Series
CLK 63 AMG Cabrio
CL63 AMG

Made in China

Benz strut nut socket, 780-9002\

Features:
Specifically designed for Mercedes-Benz C Class W203
Applicable:
Mercedes-Benz C Class 2000-2008 C203 front suspension strut top nuts (Shock absorber piston rod top nut).
Also fits W209 CLK 2003-2008
Used with a 7 mm Hex key to hold strut in place whilst tightening
22 mm Hex drive
Selected steel

Made in Taiwan

1/2"Dr. 33-pt Mercedes Benz fuel injection pump socket, 50474

This socket for mounting nd dismounting injection pumps.

Lenght: 56 mm
Inside width between teeth: about 19,45 mm
Suitable for Mercedes Benz models: 601, 602, 603, 605, 606, 615, 616 и 617
Made in China

Flywheel Holding Tool, 9G0605
Feaures: It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. This locking tools securely locates in the teeth and fixes to the housing using manufacturers guidelines.
Suitable for petrol and diesel engines.
Flywheel locking tool for Citroën, Fiat, Peugeot, BMW, Renault and Mercedes-Benz vehicles.
Applicable:
Citroen: Berlingo / Relay / Synergie 1.9D / TD / 2.0T with engine codes RFU, RFW, RGX
Peugeot: 205 / 305 / 306 / 309 / 405 / 605 / 806 / Boxer / Partner / Expert 1.6 / 1.9D / TD with engine codes XUD7, XUD9, XUD7TE, XUD9Y, XUD9A, K9K
Fiat:1.8 / 2.0 / 2.0T with engine codes LFW, RFU, RFW, RGX

OEM:
BMW 119260
Renault MOT 582-01, PSA 0153A, 6012T, 9765.54
Fiat 1860161000, 1867030000
Mercedes-Benz 607589014000.

Made in Taiwan