Photocell Sensor for Gate Opener
-
Code:3812
-
Weight:0.300 Kgs
Photocell Sensor for Gate Opener
Universal Outdoor Infrared Beam Sensor Sliding Gate Opener
Accessory 24V
1 Pair(Transmitter and Receiver) Intelligent control system and driving source solution for all kinds of gates.
Technical Parameter:
Power supply: DC 10.5V-24V/0.5A
Maxium current: TX:15maMAX RX:30maMAX
Optical source: Infrared Pulse
Infrared Wave length: 940nm
Infrared transmission frequency: 1.92KHz
Response speed: 50ms
Alarm output time: ≥1
Second Detection mode: Block off the infrared beam
Infrared angle: < ±10°
Infrared distance: ≤20m
Relay contact capacity: AC、DC30V、0.5Amax
Working environment: Temperature: -25℃~+55℃ Humidity:RH95%
Product dimension: 76x48.2x30(mm)
Note:
The optimal installation height should be lower than people.
The product should be vertical when install and make sure the transmitter and receiver be at the same level.
Since the transmitting power of this product is large,the signal will be very strong if the transimitter is too close with the reciever,so please make the distance at least 1 meter btween the transmitter and receiver,then try again.
When the installation distance is very close, remove the spectral lens to enhance the sensitivity.
Package includes:
Photocell Sensor(one transmitter and one receiver)
Mounting Accessories
Instruction manual
Made in China
Estimated Shipping
Quick Buy
Photocell Sensor for Gate Opener
Universal Outdoor Infrared Beam Sensor Sliding Gate Opener
Accessory 24V
1 Pair(Transmitter and Receiver) Intelligent control system and driving source solution for all kinds of gates.
Technical Parameter:
Power supply: DC 10.5V-24V/0.5A
Maxium current: TX:15maMAX RX:30maMAX
Optical source: Infrared Pulse
Infrared Wave length: 940nm
Infrared transmission frequency: 1.92KHz
Response speed: 50ms
Alarm output time: ≥1
Second Detection mode: Block off the infrared beam
Infrared angle: < ±10°
Infrared distance: ≤20m
Relay contact capacity: AC、DC30V、0.5Amax
Working environment: Temperature: -25℃~+55℃ Humidity:RH95%
Product dimension: 76x48.2x30(mm)
Note:
The optimal installation height should be lower than people.
The product should be vertical when install and make sure the transmitter and receiver be at the same level.
Since the transmitting power of this product is large,the signal will be very strong if the transimitter is too close with the reciever,so please make the distance at least 1 meter btween the transmitter and receiver,then try again.
When the installation distance is very close, remove the spectral lens to enhance the sensitivity.
Package includes:
Photocell Sensor(one transmitter and one receiver)
Mounting Accessories
Instruction manual
Made in China
Code: 40120
International shipment available. Please ask for price.