Magma

3/8" Go-Through Socket Set, 15 pieces, 51416

Professional 15-piece set featuring a go-through ratchet and 3/8" sockets, ideal for working on long studs and bolts where standard sockets cannot be used.

Made in China

Ford 3.5L, 3.7L, 4.0L - Engine Timing Tool Set, 50574

Used to hold the camshafts in the TDS position and retain the tensioner in the compressed position.
Suitable for Ford 3.5L, 3.7L, 4.0L engines form 2007.

Ensure precise engine timing with our timing tool kit, compatible with Ford 3.5L, 3.7L, and 4.0L engines from 2007 onward.
This kit is designed to lock the camshafts in the TDC position and hold the tensioner in a compressed state, ensuring optimal engine performance.
Compatible with a wide range of Ford and Lincoln models, including the Edge, Explorer, F-150, Flex, and many others.

OEM Tools: 303-1248; 303-1530

Made in China

Suspension Split Hub Knuckle Spreader, 51305

Features:
A compact hub clamp spreader tool designed to allow the suspension split hub to be held open to make the removal and fitting of the suspension strut easier.
Suitable for use on various BMW, Citroen, Ford, Peugeot and VW Group models, the double ended design allows it to be used on larger upper split hubs together with lower ball joint split hubs without the risk of damage.
For removal and fitting of suspension struts whilst leaving the hub on the vehicle.
Double ended action allows use on both larger upper split hubs and lower ball joint split joints.

Applications include: Audi, BMW, Citroën, Ford, Peugeot and Volkswagen.

Use with 10mm hand tools only, MAX torque 13Nm.
Maximum opening 14mm.

Keep thread clean and lightly lubricated.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

1/2" Drive Torque Wrench 20 - 120Nm, T0003

Torque range: 20 - 120Nm (14.8 - 88.6 lbf-ft)
Scale: 1.0Nm / 0.7lbf-ft.
Accuracy: ±3%.
Reversible ratchet mechanism with 72 teeth.
Aluminium knurled handle for comfort and control.
Length: 430 mm.

Made in China

20l Plastic Fuel Can, 75091

Ideal for the storage of petrol and diesel.
Manufactured from high-density polyethylene (HDPE).
Complete with a flexible pouring spout.
Capacity: 20 L
Size: 420 (L) x 180 (W) x 380 (H) mm
Weight: 0.980 kg

Made in China

Car Body Alignment Claw (2-direction), 51161

Bolt size M16×70 mm
Claw width: 43 mm

Overal length: 205 mm
Single way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs

Made in China

T30H Extra Long Screwdriver 300mm, 50779E

Magnetic tip screwdriver
With Slip-Not ergonomic soft grip handle.
For use on both Tamper Proof and standard Torx screws.
The long length is ideal for hard to reach screws.
Material: S2 steel.
Blade length: 300mm
Overal length: 400mm
Blade Tip: T30H.

7 Piece Pressure Loss Testing Kit, 50503

For checking pressure tightness of single cylinders on Diesel and gasoline engines.
Includes:
Dial indicator
M12 x 1.25 mm adaptor for motorbikes
M10 x 1.00 mm adaptor for motorbikes
M24 x 2 mm adaptor for diesel engines
M12 x 1.25 mm adaptor with 7 mm hole for VW diesel engine
Adaptor for multi valve engines
Adaptor for M14 x 1.25 and M18 x 1.5 mm
Working pressure: 6 - 12 bar
Maximum pressure 6.8 bar / 100 PSI.
Note: Before connecting to compressed air system the adjusting valve must be closed.Connect the device to the compressed air system and open the adjusting valve slowly until the pointer reaches the 0-mark.

Made in China

12” (305 mm) Magnetic tool holder, 50246-12

Convenient organizer for various tools as screwdriver, ratchet, hammer etc.
Screw and fasten on the wall.
Length: 305 mm (12 ”)

Made in China

11 pcs Bearing and seal driver set, 50130
For the installation of bearings and seals. Helps avoid damage to bearing and seal faces.
This set will provide the correct size driver for 99%, bearings, bush and oil seal installations.
The reverse side of the collar can also be used to drive seals.
Supplied with a strong blow mould case.
Ideal for car, commercial motorbike or any application that has bearings or seals.
Always drive that bearing in square and flush first time.

Professional 310mm long reach pliers with a 90° angled head, specifically designed to remove and install self-tightening hose clamps in deep and confined engine spaces.

Tackle tough jobs with confidence using our 3/4" Drive E-Torx Deep Impact Socket E24. This socket is engineered for demanding applications, providing exceptional strength and durability.

Key Features:

• 3/4" Drive: Delivers high torque for heavy-duty tasks.
• E24 Torx Size: Specifically designed for E24 Torx fasteners.
• Deep Socket Design: Allows access to fasteners in recessed areas.
• Impact Rated: Constructed from high-strength steel to withstand the forces of impact wrenches.

Built to last and perform, this impact socket is a must-have for any professional or serious DIYer.

1/2" Drive Torque Wrench 40 - 220Nm, T0002

Torque range: 40 - 220Nm (29.5 - 162.4lbf-ft)
Scale: 1.0Nm / 0.7lbf-ft.
Accuracy: ±3%.
Reversible ratchet mechanism with 72 teeth.
Aluminium knurled handle for comfort and control.
Length: 520 mm.

Made in China

21 Pcs 1/4" Drive Torque Wrench Set 1 - 25Nm, 51278

Ideal for precise screws and nuts installation.

Sockets material: Cr-V steel
Bits material: S2 steel
Torque range: 1 - 25Nm (0.7 - 18.5lbf-ft).
Scale: 0.2Nm / 0.15lbf-ft.
Accuracy: ±3%.
Drive Square Size: 1/4"
Contains:
Torque Wrench 1 - 25Nm, 72 teeth
Universal Joint
Extension Bar 100mm
Adapter 1/4"F x 3/8"M
17x Bit Sockets1/4”Dr:
Phillips: PH1, PH2, PH3
Hex (37mm): H2, H2.5, H3, H4, H5, H6, H8, H10
Hex (62mm): H5
Torx (37mm Length): T10, T15, T20, T25, T30

Made in China

Hydraulic Drive Shaft Remover/Press Set, 50127

Used to press drive shafts out of wheel hubs.
For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 98-125 mm diameter circle.
Especially for glued and rusty drive shafts.
Has a 10 ton capacity.

Applicable: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

Made in China