INSTRUMENTS

3/8” Dr. Adjustable torque wrench 5 – 25 Nm, 418-T-60-38

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/8" Dr.
Capacity: 5 – 25 Nm (0.5 – 2.5 Kgs)
Made in Taiwan

Snap ring pliers (external 90° bent tip 1.3 mm), 60905ABO

Made im: Taiwan, Force

Capacity: 8-25 mm

The Smoke Leak Detector Kit is your ultimate solution for quickly and accurately locating those elusive, hidden leaks in automotive systems. Designed for professional use and DIY enthusiasts, this tool generates safe smoke under low pressure, making even the smallest leaks visible that would otherwise be impossible to detect.

Key Features:

• Wide Application: Works seamlessly with intake, exhaust, and fuel systems (non-direct injection), as well as turbochargers, intercoolers, EGR valves, and vacuum hoses.
• Built-in Pressure Gauge: Easily monitor system pressure during testing for precise diagnostics.
• Dual Operating Modes:
  • Air Mode: Pressurize the system to identify pressure drops efficiently.
  • Smoke Mode: Generate smoke to visually pinpoint the exact location of leaks.
• User-Friendly Design: Compact and equipped with a convenient hanging hook for easy use in the engine bay.
• 12V Power Supply: Simply connect to a standard 12V vehicle battery for operation.

Advantages:

• Fast and accurate detection of leaks.
• Saves valuable time and money on troubleshooting.
• An essential tool for automotive workshops and dedicated enthusiasts alike.

Don't waste any more time guessing—get your Smoke Leak Detector Kit today and find leaks with ease and precision!

54 Pcs Impact Bits Set, 50768

Material: S2 steel.
Contains:
1 Pc 3/8" Dr.×10mm adapter
1 Pc 1/2" Dr.×10mm adapter
14 Pcs Hex Bits:
30mm: 4, 5, 6, 7, 8, 10, 12mm
75mm: 4, 5, 6, 7, 8, 10, 12mm
10 Pcs Spline Bits:
30mm: M5, M6, M8, M10, M12
75mm: M5, M6, M8, M10, M12
14 Pcs Star Bits
30mm: T20, T25, T30, T40, T45, T50, T55
75mm: T20, T25, T30, T40, T45, T50, T55
14 Pcs Tamperproof Star Bits
30mm: T20, T25, T30, T40, T45, T50, T55
75mm: T20, T25, T30, T40, T45, T50, T55

Made in China

Car Body Alignment Claw (2-direction), 51161

Bolt size M16×70 mm
Claw width: 43 mm

Overal length: 205 mm
Single way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs

Made in China

BMW - Differential Front Bush Extractor F Series, 50954

Features: This tool is used to extract and install the transversely mounted differential mounting bushing that is located in the rear subframe.
The service work can be performed on-car without the removal of the subframe.
Applicable:
BMW F01 — (2008–present) 7 Series
BMW F02 — (2009–present) 7 Series long wheelbase
BMW F04 — (2011–present) 7 Series ActiveHybrid
BMW F06 — (2011–present) 6 Series Gran Coupe/M6 Gran Coupe
BMW F07 — (2009–present) 5 Series Gran Turismo
BMW F10 — (2011–present) 5 Series Sedan/M5 Sedan
BMW F11 — (2012–present) 5 Series Touring
BMW F12 — (2011–present) 6 Series Coupe/M6 Coupe
BMW F13 — (2011–present) 6 Series Convertible/M6 Convertible
BMW F18 — (2010–present) 5 Series long wheelbase

Models: BMW F01 / F02 / F06 / F07 / F10 / F11 / F13

OEM Bush number: 33316792873

Made in China

Tire thread and brake lining gauge, 9B1802

Used to measure the amount of lining remaining on riveted and bonded drum shoes and disc brake pads.
Measures tire thread depth up to 9/16" in graduations of 1/64".
Checks pads without having to remove caliper completely.

Made in Taiwan

18” (460 mm) Magnetic tool holder, 50246-18

Convenient organizer for various tools as screwdriver, ratchet, hammer etc.
Screw and fasten on the wall.
Length: 460 mm (18 ”)

Made in China

Hose clamp pliers, 50738

Features: To remove and install clamps for hose connections in hard-to-reach areas.
With ratchet locking mechanism.
Comfortable handle with ergonomic grip.

3/8" 20-110 Nm Torque Wrench 418-T-80

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/8" Dr.
Capacity: 20-110 Nm (2 – 11 Kgs)

Made in Taiwan

Snap ring pliers (internal 90° bent tip 1.8 mm), 60905ABC

Capacity: 8-25 mm

Made in Force, Taiwan

Timing Belt Checking Gauge, meticulously designed for PureTech 1.0 and 1.2 liter engines (PSA group). This gauge is essential for maintaining engines where the belt is immersed in oil, which can lead to wear and potential damage over time.

With this tool, you can quickly and easily measure the width and wear of the belt. Early detection of thinning below the acceptable minimum allows for timely replacement and prevents serious engine damage.

Key Features:

• Specifically designed for PSA PureTech 1.0 and 1.2 liter engines (EB-series).
• Enables quick and easy measurement of timing belt wear.
• Helps prevent serious engine damage by detecting wear early.
• Compatible with models from Peugeot, Citroën, Opel, and DS Automobiles manufactured after 2012.
• OEM#: G-0109-6 / EN-52809
• Origin: China

Application: Compatible with petrol 1.0 and 1.2 liter PureTech engines (EB-series) of the PSA group, produced after 2012, including models of Peugeot, Citroën, Opel and DS Automobiles.

4Pcs 1/2" Drive Extra Long Spline Bit Socket Set, 50467

Fearutes: Extra long spline bit sockets for loosening and tightening drive shaft screws from the outside.
Applicable: for VW, Audi, Seat, Skoda, including VW Transporter T4 and Touareg.
Material:
Hardened and tempered Chrome Vanadium steel sockets.
S2 steel spline bits.
Sizes:
1 pc M8 x 800mm
1 pc M10 x 800mm
1 pc M12 x 800mm
1 pc M14 x 800mm

Made in China

Pull Camp Car Body Alignment Tool (2-way), 51160

Bolt size M14×120mm
Claw width: 35mm
Overal length: 230mm.
One way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs

Made in China

BPW Rear Hub Cap Socket 111mm, 51017

Features: Oval shape socket with two flats on the side to suit BPW rear axle hub retaining cap nuts found on later model Japanese commercial trucks, tractors and automotive equipment.
Applications: BPW 12 tons.
Use with 41mm spanner or socket.
Size: 111mm (Oval) across the flats.

Made in China